中国冷库的现状与发展趋势

本文从的设计建造、制冷工艺和管理维护这三个方面，介绍了近三年来中国冷库的现状，说明中国冷库正朝着灵活、自动化、节能和环保的方向进一步发展。     

沈阳太平洋广场空调冷热源方案比较

对一幢１１．５万ｍ＾２的四星级综合建筑的空调冷热源不同的蓄冷和取冷比较了四种方案，论证了其中直燃型溴化锂吸收式冷热水机组供冷供暖、小型燃油锅炉供蒸汽的方案最为合理。     

用发展的Sachs法研究模拟轧辊中的残余应力

对不同辊型，尺寸，材料与加工处理方法的模拟冷轧辊进行了内剥层试验研究，求出了原辊和打中心孔或扩孔后辊内残余应力分布曲线，提出了虚拟打孔法和虚拟剥层法，解决了实心辊中心和空心辊内表层的残余应力的精确测量问题，丰富了Ｓａｃｈｓ内剥层法的内容，机械法打中心孔，热处理前打中心孔，空心辊表淬前改变温度场的方法可降低残余应力值，后者降低残余应力的效果尤为显著。     

10000m^3天然气球罐用WEL—TEN610CF钢焊接冷裂纹敏感性

WEL-TEN610CF钢是日本新日铁公司生产的低裂纹敏感性高强钢,结合我国首台国产化10 000 m3天然气球罐用37 mm厚WEL-TEN610CF钢焊接性试验研究,对该钢焊接冷裂纹敏感性进行了综合评定,为其焊接工艺的制订提供了可靠的依据。     

Carbohydrate content of potato (Solanum tuberosum L.) tubers treated with Isopropyl-N (3-chlorophenyl) carbamate under different storage conditions

Post harvest application of Isopropyl-N (3-chlorophenyl) carbamate considerably reduced the degradation of starch when potato tubers were stored in an evaporative cooling chamber. The starch degraded at a faster rate when tubers were kept under refrigerated and room storage conditions.     

河南油田提高难采储量动用程度的做法

河南油田主力开发区已进入高含水开发后期,后备资源接替严重不足成为制约油田发展的瓶颈。“九五”期间,河南油田加大了难采储量评价和动用的工作力度,按照“整体研究、系统解剖、优选目标、重点突破、滚动发展”的工作思路,对目标区进行综合地质研究,同时运用简易开发、大斜度定向井、稠油冷采等多种开采方式动用难采储量,使资源利用程度逐年提高。“九五”期间共系统开发难采储量437×104t,增加可采储量63.3×104t,建成原油生产能力6.6×104t。文中以张店、新庄油田为重点,探讨了提高难采储量动用程度的途径。     

Metallurgical failure analysis of cold cracking in a structural steel weldment: Revisiting a classic failure mechanism

Cold cracking of structural steel weldments is a well-characterized, well-documented, and well-understood failure mechanism. Extensive effort has been put forth to recognize the welding and materials selection parameters that are conducive to cold cracking; however, these engineering efforts have not fully eliminated the occurrence of such failures. This article describes cold cracking failure specifically related to the construction industry. This particular failure was successfully identified prior to final erection of the structural member, and the weld was successfully reworked. These actions potentially prevented a serious catastrophic event that could have occurred have occurred either later in the construction process or possibly during the use of the building. Individual welding parameters, such as electrode/wire selection, joint design, and pre/postheating, played a role in the failure, and a number of human factors relating to the actual fabrication practices also contributed to the failure process.     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

小型全内腔脉冲Ar~＋激光管的研制

介绍一种小型全内腔脉冲Ａｒ＋激光管的设计和结构。并对不同阴极，放电管直径，激励电压及Ａｒ气压等对输出功率及激光管寿命的影响作了一系列的实验，试制出结构简单，使用方便，价格便宜的有一定实用价值的小型全内脏脉冲Ａｒ＋激光管。     

全新冷却方式双椭圆泵浦腔的实验研究

报导一种全新冷却方式的双椭圆泵浦腔，具有较高的泵浦效率和光学均匀性。１．０６μｍ调Ｑ脉冲输出能量总转换效率η＞０．７５％