萃取预分离法分离富铕中钇矿新工艺

采用一种新的串级萃取方式--萃取预分离法分离富铕中钇矿的新工艺.原料首先流入十几的三出口预先粗分离工艺,其萃余液La～Gd(TbDy)直接流入Nd/Sm工艺;中间出口流入(Gd)Tb～HoY(Er)Gd～Dy/Ho～LuY细分离工艺;出口负载有机相(Ho)Er～LuY流入Gd～Dy/Ho～LuY的洗涤段.结果表明,新工艺的粗分离工艺将占原料约70%的La～Gd(TbDy)预分离掉,使流入Gd～Dy/Ho～LuY工艺的稀土量减少约70%;由于Gd～Dy/Ho～LuY分组的萃余液GdTbDy含Ho2O3小于0.03%,省去原工艺的GdTbDy/HoY分离;新工艺的处理能力提高30%,酸碱消耗减少20%以上,贵重稀土元素Eu和Tb的存槽量大大减少.     

硅酸盐色谱分离中性氨基酸性能研究

将硅酸钠与硫酸铜或硫酸锌按等体积混合 ,制得新型无机离子交换剂硅酸铜、硅酸锌 ,分别用其作为色谱载体对中性氨基酸 (甘氨酸 ,丙氨酸 )进行分离 ,与强酸性阳离子交换树脂 0 0 1× 7的色谱行为作了比较。结果表明 ,合成的硅酸盐具有较好的分离性能。通过不同载体分离中性氨基酸 (甘氨酸 ,丙氨酸 )的流出体积的比较 ,硅酸铜的流出体积大于硅酸锌 ,硅酸锌的流出体积大于 0 0 1× 7。结果显示 ,硅酸铜比硅酸锌更适合于分离中性氨基酸 ,具有最好的分离特性     

Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

Rheological evaluation of the influence of polymer concentration and molar mass distribution on the formation and performance of asymmetric gas separation membranes prepared by dry phase inversion

Asymmetric gas separation membranes were prepared by the dry-casting technique from PEEKWC, a modified amorphous glassy poly(ether ether ketone). The phase inversion process and membrane performance were correlated to the properties of the polymer and the casting solution (molar mass, polymer concentration, solution rheology and thermodynamics). It was found that a broad molar mass distribution of the polymer in the casting solution is most favourable for the formation of a highly selective membrane with a dense skin and a porous sub-layer. Thus, membranes with an effective skin thickness of less than 1 μm were obtained, exhibiting a maximum O₂/N₂ selectivity of 7.2 and a CO₂/CH₄ selectivity of 39, both significantly higher than in a corresponding thick dense PEEKWC membrane and also comparable to or higher than that of the most commonly used polymers for gas separation membranes. The CO₂ and O₂ permeance were up to 9.5×10⁻³ and 1.8×10⁻³ m³/(m² h bar) (3.5 and 0.67 GPU), respectively.     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass

Polyurethanes were prepared from toluene diisocyanate (TDI), 1-4-butane diol (BDO) and polycaprolactone-based triols with varying molecular weights. Among each molecular weight triol-based urethane, hard segment content was varied from 20% to 70%. Differential scanning calorimetry, tensile testing, and Iosipescu shear testing were done on all the various urethanes prepared. Thermal characterization data revealed the dependence of phase separation on hard segment content as well as on the triol molecular weight. Tensile data and Iosipescu shear data further confirmed the observations made from the DSC data. The data further indicated that phase separation can greatly improve the modulus of cross-linked segmented urethanes. Adhesion of these urethanes to glass surface was evaluated using soda-lime float glass plate. Urethane samples were cast on the air side of the glass plates and adhesion was measured in shear mode. Adhesion data indicated that in addition to hard segment content, modulus, cross-link density, and molecular weight of the triols, phase separation seems to be a major factor in controlling adhesion. Surfaces of the failed adhesion samples were also analyzed and the failure mode was found to be cohesive, in varying degree, with the different urethane systems.     

Chromatographic performance of monodisperse–macroporous particles produced by “modified seeded polymerization.” I: Effect of monomer/seed latex ratio

In this study, the monodisperse–macroporous particles produced by a relatively new polymerization protocol, the so‐called, “modified seeded polymerization,” were used as column‐packing material in the reversed phase chromatography (RPC) of proteins. The particles were synthesized in the form of styrene‐divinylbenzene copolymer approximately 7.5 μm in size. In the first stage of the synthesis, the monodisperse polystyrene particles 4.4 μm in size were obtained by dispersion polymerization and used as the “seed latex.” The seed particles were swollen by a low‐molecular‐weight organic agent and then by a monomer mixture. The monodisperse–macroporous particles were obtained by the polymerization of monomer mixture in the seed particles. In the proposed polymerization protocol, the number of successive swelling stages was reduced with respect to the present techniques by the use of sufficiently large particles with an appropriate average molecular weight as the seed latex. A series of particles with different porosity properties was obtained by varying the monomer/seed latex ratio. The separation behavior of HPLC columns including the produced particles as packing material was investigated in the RPC mode using a protein mixture including albumin, lysozyme, cytochrome c, and ribonuclease A. The chromatograms were obtained with different flow rates under an acetonitrile–water gradient. The theoretical plate number increased and chromatograms with higher resolutions were obtained with the particles produced by using a lower monomer/seed latex ratio. The separation ability of the column could be protected over a wide range of flow rates (i.e., 0.5–3 mL/min) with most of the materials tested. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 607–618, 2004     

2,6-二异丙基萘的合成与分离技术的进展

2,6-二异丙基萘(2,6-DIPN)是一种重要的化合物,可用于制取高级聚酯材料和液晶聚合物。本文论述了由萘经选择性烷基化生成2,6-DIPN的研究进展,着重阐述了合成2,6-DIPN所用催化剂的研究;还总结了从异构体中分离2,6-DIPN的方法,并对吸附分离法做了详细阐述;指出由萘作原料,沸石分子筛作催化剂制备2,6-DIPN是石油萘生产的理想的技术方向。     

土壤有效磷测试方法浅析

对有效磷的两种测定方法进行比较，讨论了两种方法之间的相关性及相关系数，为土壤有效磷的测定寻求更省时，省力的测试方法。     

Langmuir吸附方程的应用

本文总结了Langmuir方程在吸附分离过程中的应用。利用Langmuir方程得到直观表达混合气组分气体间吸附强弱关系及分离的难易程度的x-y图，推导了Lewis关系式。     

Modularized design for cooperative control and plug-and-play operation of networked heterogeneous systems

In this paper, a cooperative control analysis and design method is investigated for heterogeneous dynamical systems that may be of arbitrary relative degree or nonminimum-phase or both. To achieve consensus or cooperative stability, a negative value of input-feedforward passivity index is used to accommodate and analyze such systems, and the magnitude of the index value is also used as the impact coefficient to quantify the impacts of heterogeneous dynamics of these systems on their networked operations. Physical-system-level designs are explicitly carried out to make individual linear and nonlinear systems (which are either feedback linearizable or nonminimum phase of certain form) become passivity-short and to embed one pure integrator into their input–output dynamics. The network-level distributed control can simply be chosen without any knowledge of the heterogeneous dynamics but with only information of an upper bound on their impact coefficients. It is shown, using the impact equivalence principle, that these controls separately designed but implemented together always ensure either local or global consensus and that a global non-trivial consensus emerges if and only if the information network has at least one globally reachable node or is varying but cumulatively connected. The proposed methodology of fully modularized designs unravels complexity of analyzing and designing cyber–physical systems and enables their plug-and-play into networked operations.