关联基础设施系统脆弱性分析

鉴于基础设施系统对社会生产和人民生活的重要性,分析基础设施系统的脆弱性,提出相应的抗干扰措施和改进策略,提高基础设施系统的可靠性,成为了当前研究的一个热点课题。基于此,在对基础设施系统脆弱性分析成果的基础上,从方法论的角度探讨了关联基础设施系统的脆弱性,并以华中地区某城市电力—供水网络为例分析了网络在节点级联故障下的脆弱性,为控制基础设施系统的级联故障、增强系统的抗干扰能力提供决策支持。     

基于CPLD的光电编码器角位移拟合测速法

针对常用的M法和T法无法满足增量式光电编码器整个测速范围内误差要求的问题,提出了对码盘信号进行角位移拟合求采样时刻即时速度的新方法,在匀加速条件下对这3种方法进行了仿真实验,比较了测速误差。实验结果表明,角位移拟合法在整个速度范围内都能获得很高的测速精度和误差一致性。最后用CPLD对该方法加以实现,给出了Verilog硬件描述语言的设计程序和3种方法的实验结果比较。基于CPLD的实现方法电路简单,运行稳定可靠,处理速度快,为角位移拟合法提供了一种非常好的实现方法。     

Enhanced Photocatalytic Hydrogen Evolution Over CaTi1−x Zr x O3 Composites Synthesized by Polymerized Complex Method

The solid solution of CaTi_1−x Zr _x O₃ (x = 0–0.15) was successfully synthesized by the polymerized complex (PC) method. This study has exhibited the advantage of the PC method to prepare a highly active CaTiO₃ compared with the conventional solid-state reaction (SSR) method. More importantly, further improvement in phase purity and large surface area was achieved by the doping of Zr⁴⁺, leading to remarkable enhancement of photocatalytic activities compared to pure CaTiO₃. The quantum yield for H₂ evolution over the most active photocatalyst, Pt (1.0 wt%)/CaTi_0.93Zr_0.07O₃, was 1.91% and 13.3% in photoreactions from pure water and aqueous ethanol solution, respectively for 0.1 g photocatalyst, which was about 3.3 and 2.5 times compared to that of PC-derived CaTiO₃.     

Study on the polymerization of ϵ‐caprolactam in the interlamellar spaces of [TEACOOH]–montmorillonite intercalations complex and its characterization

The polymerization of ?‐caprolactam between the interlamellar spaces of the [TEACOOH]–montmorillonite intercalations complex was attempted using Na–montmorillonite and 10‐carboxy‐n‐decyltriethylammonium bromide to achieve [TEACOOH]–polycaprolactam–montmorillonite, in which montmorillonite (inorganic polymer) is chemically bonded with the polycaprolactam (organic polymer). The results of X‐ray and IR analysis for the samples obtained after polymerization showed that the polymerization reaction has been successfully accomplished. For the purpose of studying the polymeric reaction product more precisely, we have isolated the polymerized product from the silicate layers and analyzed it with X‐ray diffractometer and IR spectrometer. Comparison of the results of X‐ray and IR analysis between the isolated polymer and the polymer that was synthesized by the reaction of ?‐caprolactam only with the organic cation without montmorillonite showed that both obtained polymers are the same compounds. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1904–1910, 2003     

硅溶胶—苯丙乳液复合路标涂料的研制

采用正硅酸乙酯(TEOS)为主要原料,以聚合溶胶法制备硅溶胶,制得的硅溶胶与苯丙乳液冷拼复配得到复合基料,再以该基料制得硅溶胶—苯丙复合路标涂料。通过正交试验分别确定了制备硅溶胶、硅溶胶—苯丙复合乳液和硅溶胶—苯丙复合路标涂料的最优方案。     

复合微生物处理生活污水的研究

对复合微生物进行了研究,利用4种微生物群分别与活性污泥混合使用处理城市污水,考察了这几种复合微生物群在不同水力停留时间时的污水处理效果,并且用空白活性污泥作对照,进行了出水CODcr的值及其去除率的对比、分析和研究。     

合成Co_2O_3—Cr_2O_3—Fe_2O_3—MnO_2系高温黑颜料最佳工艺条件的探讨

本文介绍了Co_2O_3—Cr_2O_3—Fe_2O_3—MnO_2系高温黑颜料的合成工艺,研究分析了四种氧化物的不同配比、混合及合成温度等工艺过程对颜料呈色的影响,从而确定了含钴量较低呈色纯正的Co—Cr—Fe—Mn系高温颜料的最佳工艺条件,并利用过渡金属络合物的吸收光谱理论对Co、Cr、Fe、Mn四种元素的变价离子使含Ba釉着黑色的特性作出了定性的分析.     

Methane activation without using oxidants over Mo/HZSM-5 zeolite catalysts

The effect of Mo loading, calcination temperature, reaction temperature and space velocity on the catalytic performance of methane dehydrogenation and aromatization without using oxidants over Mo/HZSM-5 has been studied. The XRD and BET measurements show that Mo species are highly dispersed in the channels of the HZSM-5 zeolite, resulting from the interaction between the Mo species and the zeolite, which also leads to a decrease in its crystallinity. The Brønsted acidity, the channel structure and the state and location of Mo species in the zeolite seem to be crucial factors for its catalytic performance. It was found that 2% Mo/HZSM-5 calcined at 773 K showed the best aromatization activity among the tested catalysts, the methane conversion being 9% at 1013 K with the selectivity to aromatics higher than 90%. The experimental results obtained from the variation of space velocity gave evidence that ethylene is an initial product. On the basis of these results a possible mechanism for methane dehydrogenation and aromatization has been proposed in which both the heterolytic splitting of methane in a solid acid environment and a molybdenum carbene-like complex as an intermediate are of significance.     

Resins containing amino and carboxylic acid groups. Synthesis,characterization, and metal ion retention properties

The crosslinked poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide], P(MAPDSA), and poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide‐co‐acrylic acid], P(MAPDSA‐co‐AA), were synthesized by radical polymerization. The resins were completely insoluble in water. Due to the lower metal ion retention of P(MAPDSA), the metal ions investigated under competitive and noncompetitive conditions for Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), and Cr(III) ions by batch and column equilibrium procedures were carried out only for P(MAPDA‐co‐AA), particularly for Hg(II). The resin–Hg(II) ion equilibrium was achieved before 15 min. The resin showed a maximum retention capacity value for Hg(II) at pH 2 of 1.89 meq/g. The resin showed a high selectivity to Hg(II) ions. The recovery of the resin was investigated at 25°C with different concentrations of HNO₃ and HClO₄. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 525–530, 2005     

新显色剂4—（2—苯并噻唑偶氮）邻苯二酚—钼（Ⅵ）—OP体系的分光光度研究

在ｐＨ５．０～５．７范围内，新显色剂４－（２－苯并噻唑偶氮）邻苯二酚（ＢＴＡＰＣ）与钼（Ⅵ）和非离子表面活性剂ＯＰ反应，形成稳定的、带负电荷的、紫红色三元胶束配合物。该配合物中Ｍｏ（Ⅵ）与ＢＴＡＰＣ的组成比为１∶２；其λｍａｘ为５６０ｎｍ，对比度（Δλ）为１２８ｎｍ；在２０℃、ｐＨ５．２和μ０．１时，配合物的表观稳定常数为３．０２×１０１０，表观摩尔吸光系数ε５６０为８．１１×１０４Ｌ·ｍｏｌ－１·ｃｍ－１，真实ε５６０为７．６７×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。钼含量在０～０．７２ｍｇ／Ｌ范围内遵从比耳定律。建议了配合物的结构。本法简便、快速、准确，用于合金钢试样中痕量或小量钼的测定，取得了满意的结果。