Low-cycle fatigue properties of eutectic solders at high temperatures

This paper details the deformation mechanism and low‐cycle fatigue life of eutectic solder alloys at high temperature (around 0.8T_m). Grain boundary sliding generally nucleates a wedge‐type cavity that reduces the low‐cycle fatigue life of metals. In this study, grain boundary sliding has promoted intergranular failure contributing to the reduction in fatigue life of Sn–Ag–Cu alloy. However, grain boundary sliding has exerted no deleterious effects on fatigue resistance of eutectic Pb–Sn and Bi–Sn alloys. The phase boundary sliding with very fine microstructure induces exceptional ductility in these alloys leading to superior low‐cycle fatigue endurance for theses eutectic Pb–Sn and Bi–Sn alloys.     

A direct estimate of JIc from the load versus load-line displacement record

The purpose of this study is to examine the current standard fracture toughness test procedure to determine if there could be an easier method to get a J_Ic value from the test record. The current method for determining J_Ic involves a detailed computational and construction procedure. The objective in this study is to simplify the analysis for the determination of J_Ic. The results of this study show that the load and displacement record for a fracture toughness test can be used to directly estimate a J_Q value, a provisional value for fracture toughness, J_Ic. The J value taken at the maximum load point can be used along with an adjustment factor to estimate a J_Q value. This J_Q estimate is close to the one obtained from the construction procedure of ASTM Standard E 1820. When a unit‐sized specimen is tested, that is, a specimen with a width of 50 mm and a thickness of 25 mm the maximum load point provides a direct estimate of J_Q. Other sizes require a size adjustment factor, which is simply a square root relationship between the width of the test specimen and a unit width. The proposed new method of estimating J_Q is simple in concept and requires a minimum number of calculations. It appears to produce values of J_Q which are comparable to those obtained from the ASTM E1820 construction procedure and may produce less scatter.     

泡沫酸化工艺对川中低压裂缝性油藏适应性的认识

针对川中油田经过多年的消耗式开采,各主产油田压力很低,增产改造的难度增大的发展现状,提出应用泡沫酸化工艺技术在川中低压油层增产改造的技术方案,其中分析了泡沫酸的物理特性、其在地层优良的渗流特性(滤失小、酸岩反应速度慢、返排迅速等优点),并进行了泡沫酸液体系的室内配方研究,提出了工艺设施的矿场配套研究内容.得出了泡沫酸化工艺对川中低压裂缝性油藏改造具有很强的适应性,具有推广应用的价值.     

朝阳沟裂缝性低渗透油田井网适应性研究

通过对比分析朝阳沟裂缝性低渗透油藏与裂缝主方向分别成11.5°和22.5°的两种不同井网的开发效果,表明与裂缝成11.5°的井网与裂缝匹配性较差,开发效果相对较差。并从油藏的水驱控制程度、压力传导情况、采收率及经济效益等方面研究评价了朝1.55区井网的适应性,为指导油田的加密调整,在技术和经济两方面综合评价确定了合理的井距和井网密度,并针对朝1-55区的地质特征,提出了井网和注水方式调整办法,在朝55区块实施后,取得了较好的现场试验效果。     

Experimental Study on Polymer Artificial Bone with HA Coated and Fiber Liners

1Introduction HA(hydroxyapatite)wasakindofbioactiveceram ics,whichhadexcellentbiocompatibilityandtissueaffin ityinthatitscomponentsweresimilartothoseofhuman bone[1].Soitwasthebestknownhumanbonesubstitute,andunprecedentedeffecthadbeenharvestedinrecenttwo d…     

连轧机用人字轮齿轴断裂失效分析

用宏观断口分析、化学检验、力学性能测定、低倍检查、金相组织及夹杂物评定鉴别、受力分析及强度寿命定量估算的方法，对人字轮被动齿轴端断裂失效原因进行分析，并提出改进措施。     

65MnTi盘条拉拔过程中出现断裂的原因分析

分析检验拉拔过程中发生断裂的65MnTi盘条的金相组织和断口形貌，得出结论；65MnTi金条发生断裂的原因是热轧后冷却速度过快，金相组织中出现了低温转变组织──马氏体组织；而理想的组织应为京氏体；并且最佳冷却速度为5℃／s左右。     

高温皂碱练与酶制剂练精干绵性能比较

通过测试比较，分析了酶制剂练、高温皂碱练由精练方法不同而造成纤维在微观、外观、机械、吸湿及电学等方面的异同点。提出酶制剂练对提高纤维梳折、提高成纱品质、提高劳动生产率、降低工人劳动强度等方面均优于高温皂碱练，是精练工程改造方向之一。     

Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

CFRP强度复合Weibull分布的物理特征分析

本文对ＣＦＲＰ材料疲劳后剩余强度的复合Ｗｅｉｂｕｌｌ分布的物理特征进行了初步分析。指出树脂基复合材料失效（破坏）机理的双重性（基体和纤维失效模型）决定了剩余强度（累积损伤程度）测试结果的分布特征。复合Ｗｅｉｂｕｌｌ分布曲线的特征与分析结果对设计、使用及材料研究都有重要参考意义。