2－重自补图论（Ⅲ）──计数理论

文中解决了２－重自补图的计数问题，获得了具有ｐ个顶点的２－重自补图的数目是其中Ｚ（Ａ）表示置换群Ａ的圈指标，Ｓ￣（２）＿ｐ表示ｐ次对称群的对群．     

动态交通分配中一类转换率系统的稳定性

在假设交通很拥挤同时交通的转换率与路径费用成正比的前提下，构建了一个动态的转换率模型．为了获取转换率系统的全局渐近稳定，提出了一个普遍适用的Lyapunov函数方法，与此同时通过线性矩阵不等式方法，得到了保证转换率系统全局渐近稳定的充分条件．     

Short cue presentations encourage advance task preparation: A recipe to diminish the residual switch cost.

In the task-switching literature, it has frequently been demonstrated that although advance task preparation reduces the switch cost, it never really eliminates the switch cost. This remaining residual switch cost received much attention, and it has been argued that advance preparation is restricted in nature. In the present study, the role of task-cue presentation in the establishment of the residual switch cost was investigated. In 4 experiments, the cue was removed during the preparation interval, and it was hypothesized that this would encourage participants to complete advance task preparation. The results of all 4 experiments provided support for this hypothesis: When the cue was presented for a short time and then removed, the residual switch cost completely disappeared. This was found for different cue types. Furthermore, Experiment 3 demonstrated that it was not the presence of the cue itself but merely differences in advance task preparation that caused the effects. This suggests that advance task preparation is not as restricted in nature as previously assumed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

A novel dynamic RWA algorithm with intelligent granularity regulation in multi-granular all-optical networks

With the great advances of DWDM technology, optical cross-connects have to deal with much more wavelengths. Accordingly, the size of optical cross-connects become larger and larger; also the management cost is much higher. To simplify the architecture of cross-connects for low-complexity maintenance, waveband switching (WBS) in conjunction with several optical cross-connect architectures have been proposed and attracted much attention recently. The main concept of WBS is to group multiple wavelengths into a single waveband and what it concerns includes cross-connect cost and port count reduction. In this paper, we investigate the dynamic RWA problem (MG_DRWA) in WBS networks comprising of all-optical switches based on a cost-effective multi-granular optical cross-connect (MG-OXC) architecture. With this reconfigurable architecture, an optical cross-connect can switch at either fiber level, waveband level, or wavelength level according to its configuration. In order to effectively accommodate dynamic traffic demand, we propose a new MG_DRWA algorithm. Numerical results reveal that the proposed algorithm can achieve significantly better blocking performance as compared to a previously proposed algorithm named MILB under various traffic loads.     

高炉冲渣水在采暖工程中的应用

随着我国经济的迅速发展,能源消耗不断增加,节约能源、降低能源消耗势在必行,余热利用是节约能源的一个重要环节,冶金行业高炉冲渣水作为采暖热媒可以节约大量能源。     

Fuel cycle strategies and plutonium management in Europe

An overview of current nuclear power generation and fuel cycle strategies in Europe is presented, with an emphasis on options for the management of separated plutonium in the medium to long term. Countries which have opted for reprocessing of spent fuel have had to contend with increasing inventories of separated plutonium. Of the various potential options for utilisation or disposition of these stockpiles, only light water reactor (LWR) mixed-oxide (MOX) fuel programmes are sufficiently technologically mature to be fully operational in several European countries at present. Such reprocessing-recycling programmes allow for a stabilisation of the overall separated plutonium stocks, but not for a significant reduction in the stockpile. Moreover, the quality of recycled plutonium decreases at each potential step of re-irradiation. Therefore, optimised or new ways of managing the plutonium stocks in the medium to long term are required. In the present overview we consider the most promising options for reactor utilisation of plutonium in both near-term future reactor and Generation IV systems.     

Energy use in the life cycle of conventional and low-energy buildings: A review article

A literature survey on buildings’ life cycle energy use was performed, resulting in a total of 60 cases from nine countries. The cases included both residential and non-residential units. Despite climate and other background differences, the study revealed a linear relation between operating and total energy valid through all the cases. Case studies on buildings built according to different design criteria, and at parity of all other conditions, showed that design of low-energy buildings induces both a net benefit in total life cycle energy demand and an increase in the embodied energy. A solar house proved to be more energy efficient than an equivalent house built with commitment to use “green” materials. Also, the same solar house decreased life cycle energy demand by a factor of two with respect to an equivalent conventional version, when operating energy was expressed as end-use energy and the lifetime assumed to be 50 years. A passive house proved to be more energy efficient than an equivalent self-sufficient solar house. Also, the same passive house decreased life cycle energy demand by a factor of three – expected to rise to four in a new version – with respect to an equivalent conventional version, when operating energy was expressed as primary energy and the lifetime assumed to be 80 years.     

׼������ظ���½��������ز�ˮ�����о�

位于准噶尔盆地腹部的陆梁油气田是准噶尔盆地的又一个亿吨级油气田。笔者运用地球化学方法分析了陆梁油气田石炭纪—早白垩世地层水的类型、平面和纵向分布特征，将其划分为3个水文地质旋回，第一旋回为石炭系—三叠系，为深层静止开放的滞流型水力系统；第二旋回为侏罗系八道湾组—西山窑组，为中层弱开放的压实驱动型水力系统；第三旋回为侏罗系头屯河组—白垩系，为浅层强开放的重力驱动型水力系统。第一、二水文地质旋回是油气生成和初次运移的有利时期，淋滤期前的一段时间是油气二次运移和成藏的较好时期，第三水文地质旋回是油气藏破坏及次生油气藏形成的时期。     

High temperature low cycle fatigue

Fatigue at high temperature is a complex phenomenon as it is influenced by a number of time-dependent processes which become important at elevated temperatures. These processes include creep, oxidation, phase instabilities and dynamic strain ageing (DSA), acting either independently or synergistically influence fatigue behaviour, often lowering the fatigue life. Current design approaches employ linear summation of fatigue and creep damage with suitable factors on permissible damage to take care of uncertainties in interaction between cyclic and time-dependent processes. It is, therefore, important to develop a deeper understanding of the processes that occur during high temperature fatigue so that realistic life predictions could be made. Results on the high temperature fatigue behaviour of austenitic stainless steels, ferritic steels and nickel base alloys are presented here. The important mechanisms of interaction of high temperature time-dependent processes with fatigue under various conditions are discussed in detail. Emphasis is placed on cyclic stress response, fatigue life, deformation substructure and fracture behaviour. This is followed by a review of important life prediction techniques under combined creep-fatigue loading conditions. Life prediction techniques considered here include linear damage summation, strain range partitioning, ductility exhaustion approach, frequency modified and frequency separation methods, techniques based on hysteresis energy and damage rate models, and methods based on crack-cavitation interation models.