Fabrication of highly bioactive zirconia ceramics via grain-boundary activation for dental implants

Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramics with outstanding mechanical properties and aesthetic origins are expected to be used in dental implant applications. However, tetragonal zirconia ceramics are not bioactive, which affect the osseointegration and reliability as dental implant materials. Herein, in this study, Y-TZP ceramics were modified by grain-boundary activation via coating a bioactive glass (BG) sol with different content on the crystal surfaces of zirconia powder and followed by being gelled, dried, granulated, low-temperature treated, molded and sintered at 1450°C for 3 h in air. The effects of BG content on the morphology, phase compositions, mechanical properties, in vitro mineralization ability and cell biological properties of the bioactivity modified Y-TZP ceramics were evaluated. The BG additive did not affect the tetragonal–monoclinic phase transformation of ZrO₂. However, the addition of BG decreased the flexural strength of the modified Y-TZP ceramics compared to that of Y-TZP. The in vitro mineralization results showed that a homogeneous apatite layer was produced on the surface of the Y-TZP ceramics when they were immersed in the simulated body fluid for 21 days. The cell response results indicated that the bioactive surface modification of Y-TZP ceramics could promote cell adhesion, propagation and osteogenic differentiation performance. Thus, our research results suggest that the highly bioactive Y-TZP ceramics could be a potential candidate for dental implant material.     

A novel strategy for fabricating zirconia implants with a trabecular biomimetic porous surface

For successful osseointegration of load-bearing implants, an improved bone–implant contact area through a trabecular porous surface resulting in minimized stress shielding effect is highly desirable. We propose a novel strategy of green net shaping a ceramic dough, combined with a reticular foam replica method and gradient coating, to fabricate biomimetic porosity in a customizable ceramic dental implant for the first time. About 85 vol% porosity and 300–600-μm pore size were evident in microCT and electron microscopy of the sintered samples, suitable for bone ingrowth. Excellent integrity at the interface along with homogeneous distribution of secondary alumina phase in zirconia matrix was achieved, despite the difference in the green state powder loading between the dough and the slurry.     

Antifungal activity of denture soft lining material modified by silver nanoparticles-a pilot study

Soft liner materials in oral cavity environments are easily colonized both by fungi and dental plaque. These factors are the cause of mucosal infections. The microorganism that most frequently colonizes soft liner materials is Candida albicans. Colonization occurs on the surface of materials and within materials. A solution to this problem might involve modification of soft liner materials with silver nanoparticles (AgNPs). In this article, we present results showing the antifungal efficacy of silicone soft lining materials modified with AgNPs. The modification process was conducted by dissolving both material components (base and catalyst) in a colloidal solution of AgNPs and evaporating the solvent. Composites with various AgNP concentrations (10, 20, 40, 80, 120 and 200 ppm) were examined. The in vitro antifungal efficacy (AFE) of composite samples was 16.3% to 52.5%.     

Preparation and characterization of light‐cured methacrylate/montmorillonite nanocomposites

Polymer/clay nanocomposites were prepared from dimethacrylate monomers, commonly used in dental restorative resins, and an organically modified silicate (montmorillonite). The photopolymerization process was hardly affected by the presence of the silicate filler, and thus 2 mm thick samples containing 3 wt% clay were extensively cured. Transmission electron microscopy revealed that the montmorillonite platelets were either intercalated or exfoliated. Nevertheless, for all formulations, intermediate‐sized aggregates of about 1 µm were present and their fraction increased as the amount of filler increased. The presence of the clay was found to have no major effect on the flexural modulus and compressive yield strength of the nanocomposites. Moreover, the water uptake of nanocomposites containing 3 wt% clay was about 10–15% higher than that of unfilled monomers. Modification of the clay surface with alternative organic cations is certainly necessary in order to achieve an optimal dispersion of the clay in the polymer matrix. Copyright © 2010 Society of Chemical Industry     

牙科用TZP陶瓷的基本性能的研究

本研究采用化学共沉淀法制备氧化锆粉体 ,135 0℃烧结。测得弯曲强度为 70 9MPa ,断裂韧性为 11.6MPam1/2 。Ce -Y -Mg复合稳定剂可以对ZrO2 起到很好的稳定作用 ;弯曲强度和断裂韧性均为桩钉材料重要指标 ,桩钉材料的断裂韧性越高越好 ,而强度要适当。Ce -Y -Mg复合稳定TZP韧性好 ,较其它TZP高 ,有可能成为牙科桩钉材料。     

New calix[4]arenedimethacrylate derivatives for dental composites

Calix[4]arenes were double alkylated with various alkylhalogenides and the residual OH functions were subsequently dimethacrylated with methacryloyl chloride. The successful synthesis of polymerizable calixarenes was proved using ¹H NMR spectroscopy, matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry and differential scanning calorimetry. The polymerization behaviour was confirmed by copolymerization with methacrylic acid methyl ester. Furthermore, the flexural strength, the flexural modulus of elasticity, the exothermic course of the photo‐curing reaction and the polymerization shrinkage of experimental dental filling composites containing the modified calixarenes were evaluated. Copyright © 2012 Society of Chemical Industry     

Methacrylated calix[4]arene phosphonic acids as functionalized crosslinker for radical polymerization

We describe the synthesis of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dioxypropylphosphonic acid‐26,28‐dimethacryloyloxy‐calix [4]arene and 5,11,17,23‐tetra‐tert‐butyl‐25‐oxypropylphosphonic acid‐27‐hydroxy‐26,28‐dimethacryloyloxy‐calix[4]arene starting from para‐tert‐butyl‐calix[4]arene. The complete reaction was proved by matrix‐assisted laser desorption ionization time of flight mass spectrometry and nuclear magnetic resonance spectroscopy. The influence of these compounds on the kinetics of the radical polymerization of methyl methacrylate was shown by dilatometry. Furthermore, the adhesive properties of dental adhesives containing these calix[4]arene derivatives were investigated. Copyright © 2012 Society of Chemical Industry     

Healing Pattern Analysis for Dental Implants Using the Mechano-Regulatory Tissue Differentiation Model

(1) Background: Our aim is to reveal the influence of the geometry designs on biophysical stimuli and healing patterns. The design guidelines for dental implants can then be provided. (2) Methods: A two-dimensional axisymmetric finite element model was developed based on mechano-regulatory algorithm. The history of tissue differentiation around eight selected implants can be predicted. The performance of the implants was evaluated by bone area (BA), bone-implant contact (BIC); (3) Results: The predicted healing patterns have very good agreement with the experimental observation. Many features observed in literature, such as soft tissues covering on the bone-implant interface; crestal bone loss; the location of bone resorption bumps, were reproduced by the model and explained by analyzing the solid and fluid biophysical stimuli and (4) Conclusions: The results suggested the suitable depth, the steeper slope of the upper flanks, and flat roots of healing chambers can improve the bone ingrowth and osseointegration. The mechanism related to solid and fluid biophysical stimuli were revealed. In addition, the model developed here is efficient, accurate and ready to extend to any geometry of dental implants. It has potential to be used as a clinical application for instant prediction/evaluation of the performance of dental implants.     

Design and optimization of zirconia functional surfaces for dental implants applications

Zirconia is becoming a promising solution for biomedical applications, namely for dental implants, due to its biocompatibility, and mechanical and aesthetical properties. Despite the constant developments in the dentistry field, strategies to promote an effective vascularization at the implant's surface and consequently improved osseointegration are still not enough.In this sense, with the aim of promoting the vascularization at the implant's surface, zirconia surfaces with micro-channels were designed and evaluated regarding their hydrophilicity and capillarity. A CAD/CAM system was used to design and produce the specimens and different techniques were used to characterize the surfaces. The obtained average surface roughnesses are in accordance with the literature for similar materials. Results revealed that the produced materials present high levels of hydrophilicity, whether in contact with water or FBS - Fetal Bovine Serum. Additionally, micro-channels with 200 μm of width and 100 μm of depth were the ones that presented higher capillarity, thus being promising solutions for the promotion of implants vascularization, and consequently improved osseointegration.     

牙科照明用异型微结构玻璃光纤棒的研究

针对传统牙科照明用光纤柔软易折断,装配难度大,端面易浸入血水造成交叉感染,敛集率低,光传输效率低等问题,研发了一种异型微结构玻璃光纤棒作为牙科照明手机内的通光元件,在装配、消毒、通光率等方面与传统牙科照明光纤做对比后证实刚性异型微结构玻璃光纤棒易于装配,耐医用高温高压消毒,且端面致密,抵制血水浸入;并在多次高温高压消毒后依然具备很高的光传输效率。