淮北平原主要农作物涝渍灾害 损失评估研究

针对淮北平原除涝减灾综合治理与规划中缺乏主要农作物受涝损失调查与评估基础资料的实 际问题,于2010年9月初区域降雨成灾之际,对受涝区进行主要农作物受涝经济损失调查。依据实 地调研成果,通过综合统计分析推求了不同耕地类型不同暴雨强度下的受涝损失率,在此基础上实现 了对淮北平原受涝经济损失的合理评估。     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

浅谈计算机硬盘数据丢失原因及恢复

本文主要对计算机硬盘数据丢失的原因、恢复软件的应用方法进行分析。     

The weak aggregating algorithm and weak mixability

This paper resolves the problem of predicting as well as the best expert up to an additive term of the order o(n), where n is the length of a sequence of letters from a finite alphabet. We call the games that permit this weakly mixable and give a geometrical characterisation of the class of weakly mixable games. Weak mixability turns out to be equivalent to convexity of the finite part of the set of superpredictions. For bounded games we introduce the Weak Aggregating Algorithm that allows us to obtain additive terms of the form .     

Limit load and shakedown analysis of plastic structures under stochastic uncertainty

Problems from plastic analysis are based on the convex, linear or linearised yield/strength condition and the linear equilibrium equation for the stress (state) vector. In practice one has to take into account stochastic variations of several model parameters. Hence, in order to get robust maximum load factors, the structural analysis problem with random parameters must be replaced by an appropriate deterministic substitute problem. A direct approach is proposed based on the primary costs for missing carrying capacity and the recourse costs (e.g. costs for repair, compensation for weakness within the structure, damage, failure, etc.). Based on the mechanical survival conditions of plasticity theory, a quadratic error/loss criterion is developed. The minimum recourse costs can be determined then by solving an optimisation problem having a quadratic objective function and linear constraints. For each vector a(·) of model parameters and each design vector x, one obtains then an explicit representation of the “best” internal load distribution F^∗. Moreover, also the expected recourse costs can be determined explicitly. Consequently, an explicit stochastic nonlinear program results for finding a robust maximal load factor μ^∗. The analytical properties and possible solution procedures are discussed.     

网络化控制系统中状态估计策略的进展

在网络化控制系统(Networked Control Systems,简记为NCSs)中,由于网络的介入使控制系统的规模和复杂性显著增加,且产生了各种新问题,为了使控制更加容易,需要设计合理的估计策略.主要从控制和通信2个角度出发,集中考虑了在量化影响、时延与丢包、不确定性等通信受限因素下状态估计策略的研究与进展.一直以来,状态估计都是诸如过程监控、故障诊断等控制领域中不可缺少的重要部分,当前已成为网络化控制系统研究的热点和准点,为抵消网络环境不确定性对闭环系统性能的影响,设计最优的状态估计策略必将成为不可缺少的因素之一.     

考虑EV充放电意愿的园区综合能源系统双层优化调度

随着电动汽车的普及度越来越高,工业园区的电动汽车用户日益增多,其充放电行为对园区综合能源系统规划和运行带来极大挑战。本文提出了考虑电动汽车充放电意愿的园区综合能源系统双层优化调度。首先基于动态实时电价、电池荷电量、电池损耗补偿、额外参与激励等因素建立充放电意愿模型,在此基础上得到改进的电动汽车充放电模型;然后,以园区综合能源系统总成本最小和电动汽车充电费用最小为目标建立双层优化调度模型,通过KKT条件将内层模型转化为外层模型的约束条件,从而快速稳定的实现单层模型的求解;最后,进行仿真求解,设置3种不同场景,对比了所提模型与一般充放电意愿模型,验证了文中所提引入EV充放电意愿模型的园区综合能源系统双层优化调度的有效性和可行性,具有一定的经济效益。     

Optimization of correlated multi-response quality engineering by the upside-down normal loss function

Most of the published literature on robust design is basically concerned with a single response. However, the reality is that common industrial problems usually involve several quality characteristics, which are often correlated. Traditional approaches to multidimensional quality do not offer much information on how much better or worse a process is when finding optimal settings. Köksoy and Fan [Engineering Optimization 44 (8): 935–945] pointed out that the upside-down normal loss function provides a more reasonable risk assessment to the losses of being off-target in product engineering research. However, they only consider the single-response case. This article generalizes their idea to more than one response under possible correlations and co-movement effects of responses on the process loss. The response surface methodology has been adapted, estimating the expected multivariate upside-down normal loss function of a multidimensional system to find the optimal control factor settings of a given problem. The procedure and its merits are illustrated through an example.     

High power devices in wide bandgap semiconductors

Silicon carbide (SiC) semiconductor devices for high power applications are now commercially available as discrete devices. Recently Schottky diodes are offered by both USA and Europe based companies. Active switching devices such as bipolar junction transistors (BJTs), field effect transistors (JFETs and MOSFETs) are now reaching the market. The interest is rapidly growing for these devices in high power and high temperature applications. The main advantages of wide bandgap semiconductors are their very hi...     

Comparison of the RF MEMS switches with dielectric layers on the bridge’s lower surface and on the transmission line

Previously, we proposed that the dielectric layer of RF MEMS switch can be fabricated either on the transmission line, as traditional switches, or on the lower surface of the bridge. This paper presents a detailed comparison of the RF MEMS switches with different positions of dielectric layer. Through theoretically analyzing the physical model of fringing capacitance, it is revealed that different positions of dielectric layer can result in different switch capacitances. Therefore, the change of d...