Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

Stabilization of Rössler chaotic dynamical system using fuzzy logic control algorithm

This paper proposes a fuzzy logic control algorithm (FLCA) to stabilize the Rössler chaotic dynamical system. The fuzzy logic control system is based on a Takagi-Sugeno-Kang inference engine and the stability analysis in the sense of Lyapunov is carried out using Lyapunov’s direct method. The new FLCA is formulated to offer sufficient inequality stability conditions. The asymptotic complexity of our algorithm is analyzed and proved to be lower in comparison with that of linear matrix inequality-based FLCAs. A set of simulation results illustrates the effectiveness of the proposed FLCA.     

充油S-SBR加工行为的研究

在中试装置上合成相对分子质量分布较宽的充油S-SBR，考察不同环烷油和芳烃油填充量的充油S-SBR的流变性能和混炼行为。结果表明，增大油的填充量能提高充油S-SBR的流动性能，充芳烃油S-SBR相对于充环烷油的S-SBR对温度更敏感，宽相对分子质量分布的充环烷油S-SBR的混炼性能优于S-SBR1204及E-SBRl778，竟相对分子质量分布的充芳烃油S-SBR的混炼性能优于S-SBR1204，Solprene380和E-SBR1712。     

采用高性能搅拌设施生产适应市场的水泥

在欧洲和世界其它地区，CEMⅠ水泥(渡特兰水泥)日益为CEMⅡ水泥(有几个主要组份的渡特兰水泥)和CEMⅢ水泥(高炉矿渣水泥)所替代。为了满足生产具有特定粒径分布的高质量水泥的要求，现广为采用的不同水泥组分的混合粉磨工艺已经被单独粉磨然后再在高性能均化设施中进行均化的工艺所代替。依据情况不同，可以采用连续或间歇式搅拌机。文章描述了不同工艺技术．并介绍了最近的几个实例：     

碰撞式混合器的设计和使用

从反应注射成型过程对混合器的结构设计、操作条件等的要求出发，对碰撞式混合器的设计和使用应注意的问题进行了分析探讨，并提出了相应的解决办法和处理措施。     

Enzymatic esterification of glycerol II. Lipase-catalyzed synthesis of regioisomerically pure 1(3)-rac-monoacylglycerols

Regioisomerically pure 1(3)-rac-monoacylglycerols are conveniently prepared in high yields (>75%) and in multigram quantities by enzymatic esterification of glycerol in the presence of various lipases(Chromobacterium viscosum, Rhizopus delemar, Rhizomucor miehei) with a variety of different acyl donors, such as free fatty acids, fatty acid alkyl esters, vinyl esters and triacylglycerols, as well as natural fats and oils. All reactions are carried out in aprotic organic solvents with low water content, namelyn-hexane, diethyl ether, tBuOMe or mixtures of these solvents. Essential for the success of these transformations were the following two factors. First, the creation of an artificial interphase between the solvent-immiscible hydrophilic glycerol and the hydrophobic reaction medium by its adsorption onto a solid support. Second, a facile system for the separation of the desired monoacylglycerol from the reaction mixture, coupled with the continuous recycling of acyl donor and undesirable by-products.     

一种基于TL494芯片的电动车电机控制器

他励直流电动机驱动系统结构简单、性能可靠、成本低,适合在小型电动车上运行,有效的降低了电动汽车的价格,有利于电动汽车的普及。本文在分析电动车用他励直流电机工作原理的基础上,论述电机驱动系统的整体方案,并设计3KW/36V他励有刷直流电机控制器。该控制器主要通过TL494控制,包括36V铅酸蓄电池欠压保护,控制器的过热保护等功能。经实验证实该控制器达到设计指标,工作稳定可靠,满足电动车的各种运行情况,保护功能完善并具有能量回馈等功能。     

国外挤出成型加工技术及设备的近期进展

简要评述了国外塑料挤出成型加工技术及设备的近期进展,重点介绍了混炼挤出技术及设备、反应挤出技术及设备以及共挤出成型及设备的发展动向,并列举了国外主要公司的技术成果.     

STM32的双路信号源及其配置平台设计

针对目前测量分析、弱信号检测的需求,以STM32F107和AD9958为核心实现了一种高分辨率幅度、频率、相位的双路信号源。首先对直接数字合成(Direct Digital Synthesis,DDS)工作原理进行介绍,重点分析了杂散的主要来源,并设计LC椭圆低通滤波器对杂散进行抑制。设计输出电路使信号源满足低频需求,并可直接用于驱动负载。最后采用STM32F107和VC6.0搭建了配置平台,对信号源波形灵活控制。     

The use of a mixing-sensitive chemical reaction for the study of pulp fibre suspension mixing

The competitive, consecutive chemical reactions between 1-naphthol and diazotized sulfanilic acid were utilized to study the mixing of a pulp fibre suspension in a 22 L stirred tank reactor. Mixing quality was determined from the distribution between the mono and bis substituted reaction products once a correlation was made for the adsorption of the product dyes onto the suspended fibres. The technique was found to be adequate for assessing micromixing and turbulence intensity within a fibre suspension provided the measured product distribution, Xs, was between 0.4 and 0.01. Thus the mixing conditions that could be assessed depended on both the energy dissipation within the mixer and the amount of the fibre present. For the experimental conditions chosen for this study energy dissipation rates would typically have to be less than 80 W/kg and the suspension mass concentration less than 2.5%. When compared with water, a reduction in turbulence levels at both the impeller zone and a remote zone in the stirred vessel was observed for fibre mass concentrations as low as 0.5%. The turbulence decreased as the suspension mass concentration was increased. This decrease is attributed to energy dissipation by friction at fibre-fibre contact points as the fibres move relative to one another in the flow. This sink removes energy from the turbulence cascade which never shows up as small-scale fluid deformations leading to better mixing.