Freely Tailorable Yolk-Shell Encapsulation: Versatile Applications in Ultralow-k Dielectric,Drug Delivery Systems,and Catalysts

Herein, a facile, controllable, and versatile method is reported to prepare monodisperse yolk-shell and yolk-multishell silica nanoparticles (NPs) with mesoporous shells by a novel selective etching strategy. The mechanism of selective etching based on fluoride-silica chemistry is investigated in detail and thus provides a fundamentally novel principle for the fabrication of yolk-shell NPs. Specifically, this unprecedented and versatile synthesis strategy can be used to encapsulate essentially any silica-based, carbon-based, metal, metal oxide, or other possible NPs. Noteworthy is that most of the yolk-shell mesoporous silica (mSiO₂) NPs are prepared for the first time. To demonstrate the major structural and compositional advantages of the designed yolk-shell NPs, their applications in the fields of ultralow-dielectric constant (k) materials, drug delivery systems, and catalysts were explored. In detail, the lowest k value of the prepared yolk-shellordered mesoporous silica@mSiO₂/fluorinated polybenzoxazole composite films is 2.02; The obtained yolk-shell mSiO₂/C@mSiO₂/C NPs possess high hydrophilicity and pH-responsive sensitivity; The conversion of the catalytic reaction of the designed magnetic yolk-shell hollow Fe₃O₄@SiO₂/Au@mSiO₂ NPs at 20 min is 97% with a high conversion rate (92%) and recyclability even after 10 reuses. This innovative work lays a solid foundation for freely tailorable yolk-shell encapsulation and will greatly stimulate more efforts devoted to relevant research and development.     

Drug‐Loaded Mesoporous Tantalum Oxide Nanoparticles for Enhanced Synergetic Chemoradiotherapy with Reduced Systemic Toxicity

Combining chemotherapy and radiotherapy (chemoradiotherapy) has been widely applied in many clinical practices, showing promises in enhancing therapeutic outcomes. Nontoxic nanocarriers that not only are able to deliver chemotherapeutics into tumors, but could also act as radiosensitizers to enhance radiotherapy would thus be of great interest in the development of chemoradiotherapies. To achieve this aim, herein mesoporous tantalum oxide (mTa₂O₅) nanoparticles with polyethylene glycol (PEG) modification are fabricated. Those mTa₂O₅‐PEG nanoparticles could serve as a drug delivery vehicle to allow efficient loading of chemotherapeutics such as doxorubicin (DOX), whose release appears to be pH responsive. Meanwhile, owing to the interaction of Ta with X‐ray, mTa₂O₅‐PEG nanoparticles could offer an intrinsic radiosensitization effect to increase X‐ray‐induced DNA damages during radiotherapy. As a result, DOX‐loaded mTa₂O₅‐PEG (mTa₂O₅‐PEG/DOX) nanoparticles can offer a strong synergistic therapeutic effect during the combined chemoradiotherapy. Furthermore, in chemoradiotherapy, such mTa₂O₅‐PEG/DOX shows remarkably reduced side effects compared to free DOX, which at the same dose appears to be lethal to animals. This work thus presents a new type of mesoporous nanocarrier particularly useful for the delivery of safe and effective chemoradiotherapy.     

Redox and pH Dual Responsive Polymer Based Nanoparticles for In Vivo Drug Delivery

Responsive nanomaterials have emerged as promising candidates as drug delivery vehicles in order to address biomedical diseases such as cancer. In this work, polymer‐based responsive nanoparticles prepared by a supramolecular approach are loaded with doxorubicin (DOX) for the cancer therapy. The nanoparticles contain disulfide bonds within the polymer network, allowing the release of the DOX payload in a reducing environment within the endoplasm of cancer cells. In addition, the loaded drug can also be released under acidic environment. In vitro anticancer studies using redox and pH dual responsive nanoparticles show excellent performance in inducing cell death and apoptosis. Zebrafish larvae treated with DOX‐loaded nanoparticles exhibit an improved viability as compared with the cases treated with free DOX by the end of a 3 d treatment. Confocal imaging is utilized to provide the daily assessment of tumor size on zebrafish larva models treated with DOX‐loaded nanoparticles, presenting sustainable reduction of tumor. This work demonstrates the development of functional nanoparticles with dual responsive properties for both in vitro and in vivo drug delivery in the cancer therapy.     

Sorafenib delivery nanoplatform based on superparamagnetic iron oxide nanoparticles magnetically targets hepatocellular carcinoma

Currently,sorafenib is the only systemic therapy capable of increasing overall survival of hepatocellular carcinoma patients.Unfortunately,its side effects,particularly its overall toxicity,limit the therapeutic response that can be achieved.Superparamagnetic iron oxide nanoparticles (SPIONs) are very attractive for drug delivery because they can be targeted to specific sites in the body through application of a magnetic field,thus improving intratumoral accumulation and reducing adverse effects.Here,nanoformulations based on polyethylene glycol modified phospholipid micelles,loaded with both SPIONs and sorafenib,were successfully prepared and thoroughly investigated by complementary techniques.This nanovector system provided effective drug delivery,had an average hydrodynamic diameter of about 125 nm,had good stability in aqueous medium,and allowed controlled drug loading.Magnetic analysis allowed accurate determination of the amount of SPIONs embedded in each micelle.An in vitro system was designed to test whether the SPION micelles can be efficiently held using a magnetic field under typical flow conditions found in the human liver.Human hepatocellular carcinoma (HepG2) cells were selected as an in vitro system to evaluate tumor cell targeting efficacy of the superparamagnetic micelles loaded with sorafenib.These experiments demonstrated that this delivery platform is able to enhance sorafenib's antitumor effectiveness by magnetic targeting.The magnetic nanovectors described here represent promising candidates for targeting specific hepatic tumor sites,where selective release of sorafenib can improve its efficacy and safety profile.     

The influence of bile salts on the distribution of simvastatin in the octanol/buffer system

Abstract

Introduction: Distribution coefficient (D) is useful parameter for evaluating drugs permeability properties across biological membranes, which are of importance for drugs bioavailability. Given that bile acids are intensively studied as drug permeation-modifying and -solubilizing agents, the aim of this study was to estimate the influence of sodium salts of cholic (CA), deoxycholic (DCA) and 12-monoketocholic acids (MKC) on distribution coefficient of simvastatin (SV) (lactone [SVL] and acid form [SVA]) which is a highly lipophilic compound with extremely low water solubility and bioavailability.

Methods: LogD values of SVA and SVL with or without bile salts were measured by liquid–liquid extraction in n-octanol/buffer systems at pH 5 and 7.4. SV concentrations in aqueous phase were determined by HPLC-DAD. Chem3D Ultra program was applied for computation of physico-chemical properties of analyzed compounds and their complexes.

Results: Statistically significant decrease in both SVA and SVL logD was observed for all three studied bile salts at both selected pH. MKC exerted the most pronounced effect in the case of SVA while there were no statistically significant differences between observed bile salts for SVL. The calculated physico-chemical properties of analyzed compounds and their complexes supported experimental results.

Conclusions: Our data indicate that the addition of bile salts into the n-octanol/buffer system decreases the values of SV distribution coefficient at both studied pH values. This may be the result of the formation of hydrophilic complexes increasing the solubility of SV that could consequently impact the pharmacokinetic parameters of SV and the final drug response in patients.     

Engineered microparticles based on drug–polymer coprecipitates for ocular-controlled delivery of Ciprofloxacin: influence of technological parameters

Abstract

Ciprofloxacin is a drug active against a broad spectrum of aerobic Gram-positive and Gram-negative bacteria, for the therapy of ocular infections. It requires frequent administrations owing to rapid ocular clearance and it is a good candidate for ocular controlled release formulations. The preparation of such drug release systems is still a challenge. Ionic interactions between ciprofloxacin and the polyelectrolytes chondroitin sulfate or lambda carrageenan result in coprecipitates that can act as microparticulate controlled release systems from which the drug is released after being displaced by the medium’s ions. In some formulations, Carbopol was added to improve the mucoadhesive properties. The aim of this research was the study of the influence of the technological parameters of the preparation method of coprecipitates on their particle size, with the goal of achieving particles engineered with a size suitable for the ocular administration. Technological parameters taken into account were: concentration of drug and polymer solutions utilized for the preparation of interaction products, possible use of surfactants (kind and concentration), temperature of the solutions and stirring during the process of preparation of the coprecipitates. Preliminary stability study tests were carried out to further characterize the leader formulation. Particle size in suspensions for ocular drug delivery is a critical parameter influencing the quality of the formulation. The results obtained from this study show that chondroitin sulfate coprecipitates present the best characteristics in terms of particle size suitable for ocular administration. A further improvement of the particle size characteristics has been obtained with the addition of surfactants.     

Anti prostate cancer using PEGylated bombesin containing,cabazitaxel loading nano-sized drug delivery system

Context: Prostate cancer (PCa) is the second most-frequently diagnosed cancer in men. Cabazitaxel was approved for the treatment of patients with hormone-refractory metastatic prostate cancer previously treated with a docetaxel-containing regimen.

Objective: In this study, bombesin (BN), a ligand reported to specifically target GRP overexpressing prostate tumor, was applied for the construction of lipid-polymer hybrid nanoparticles (LPNs), and used for the targeted delivery of cabazitaxel (CAB) to prostate cancer.

Methods: BN-polyethylene glycol-1,2-Distearoyl-sn-glycero-3-phosphoethanolamine (BN-PEG-DSPE) was synthesized. CAB loaded, BN-PEG-DSPE contained LPNs (BN-CAB-LPNs) were prepared. Their particle size, zeta potential and drug encapsulation efficiency (EE) were evaluated. In vitro cytotoxicity study of BN-CAB-LPNs was tested in LNCaP human prostatic cancer cell line (LNCaP cells). In vivo anti-tumor efficacy of the carriers was evaluated on mice bearing prostate cancer model.

Results: The optimum BN-CAB-LPNs formulations had a particle size of 184.9?nm and a 26.5?mV positive surface charge. The growth of LNCaP cells in vitro was obviously inhibited. BN-CAB-LPNs also displayed better anti-tumor activity than the other formulations in vivo.

Conclusion: The results demonstrated that BN-CAB-LPNs can sufficiently deliver CAB to the cancer cells and enhance the anti-tumor capacity. Thus, BN-CAB-LPNs can be proved to be a superior nanomedicine which can achieve better therapeutic efficacy of prostate tumor.     

Modulation of the wettability of excipients by surfactant and its impacts on the disintegration and release of tablets

Objective: To investigate the modulation of the wettability of excipients by different types of surfactants and its impacts on the disintegration of tablets and drug release.

Materials and methods: The critical micelle concentration (CMC) of surfactants, including sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), dodecyl trimethyl ammonium bromide (DTAB), cetyltrimethyl ammonium bromide (CTAB) and polysorbate (Tween-20 and Tween-80), was obtained using the platinum ring method. Contact angles of surfactant solutions on the excipient compacts and double-distilled water on the mixture of surfactant and the other excipient (magnesium stearate (MgSt) or sodium alginate (SA)) were measured by the sessile drop technique. Besides, surface free energy of excipients was calculated by the Owens method. Finally, the disintegration of tablets and in vitro dissolution testing were performed according to the method described in USP.

Results and discussion: The wettability of excipients could be enhanced to different extent with low concentration of surfactant solutions and maintained stable basically after CMC. For MgSt (hydrophobic excipient), the shorter the hydrophobic chain (C₁₂, including SDS and DTAB), the better the wettability with the addition of surfactant in the formulation, leading to the shorter disintegration time of tablets and higher drug release rate. In contrast, the wettability of SA (hydrophilic excipient) was reduced by adding surfactant, resulting in the longer disintegration time of tablets and lower release rate.

Conclusion: The modulation of the wetting of pharmaceutical excipients by surfactant had changed the disintegration time of tablets and drug release rate to a greater extent.