电动机保护控制系统显示模块设计

以图形液晶显示模块MGLS12864作为显示器，从接口电路、液晶显示初始化、字模库的建立、汉字及字符的显示、页面处理等方面介绍了电动机保护控制系统显示模块的设计方法。该系统经投入实际运行，表明利用提出的方法所设计的显示模块，工作是稳定可靠的，性能达到了设计‘要求。     

Highly Sensitive Electro‐Plasmonic Switches Based on Fivefold Stellate Polyhedral Gold Nanoparticles

Electron–photon coupling in metal nanostructures has raised a new trend for active plasmonic switch devices in both fundamental understanding and technological applications. However, low sensitivity switches with an on/off ratio less than 5 have restricted applications. In this work, an electrically modulated plasmonic switch based on a surface‐enhanced Raman spectroscopy (SERS) system with a single fivefold stellate polyhedral gold nanoparticle (FSPAuNP) is reported. The reversible switch of the SERS signal shows high sensitivity with an on/off ratio larger than 30. Such a high on/off ratio arises primarily from the plasmonic resonance shift of the FSPAuNP with the incident laser due to the altered free electron density on the nanoparticle under an applied electrochemical potential. This highly sensitive electro‐plasmonic switch may enable further development of plasmonic devices.     

无载体~(103)Pd的加速器制备

用电镀铑箔靶和改进的电溶解铑靶装置制备10 3Pd。以Dowex1× 8(Cl- )阴离子树脂为离子交换剂 ,1mol/LNH4 Cl 1mol/LNH4 OH为解吸液 ,得到钯的解吸率为 95 %。所得10 3Pd核纯度为99 8%     

静电致动圆形微泵膜片的变形计算

针对静电驱动微泵（micropump）多能量域系统仿真中存在计算量大的问题,基于弹性力学小挠度变形理论和微机电系统中的静电驱动理论,建立了静电力驱动下圆形微泵膜片（membrane）的变形曲面方程,采用伽辽金加权残值法得到膜片变形和泵腔容积变化的半解析式,结果显示膜片的变形和泵的容积变化与驱动电压的平方成正比．采用本文公式建立微泵系统宏模型（macromodel）或集中参数模型,有助于提高微泵系统仿真的计算效率．     

驾驶员疲劳状态生理信号的DFA

通过去趋势波动分析(DFA)研究驾驶员疲劳状态的心率变异性信号和脑电信号特征.22名被试在驾驶模拟器上进行模拟驾驶作业,采集驾驶过程中的心率变异性和脑电信号并进行离线分析.Wil-coxon符号秩检验用于分析清醒和疲劳两种状态间DFA标度指数的差异,受试者工作曲线(ROC)分析用于确定DFA区分疲劳驾驶和清醒驾驶的能力.结果表明:疲劳状态时,心率变异性和脑电信号的标度指数显著增加(Wilcoxon符号秩检验,p＜0.01);心率变异性和脑电信号标度指数的ROC下面积最大分别为0.75和0.78.DFA的标度指数具有应用于驾驶疲劳监测系统的前景.     

Electrochemical oxidation of tannery wastewater

Tannery wastewater was treated by an electrochemical oxidation method using Ti/Pt, Ti/PbO₂ and Ti/MnO₂ anodes and a Ti cathode in a two‐electrode stirred batch reactor. The changes in colour concentration, chemical oxygen demand (COD), ammonia (NH₄⁺), sulfide and total chromium have been determined as a function of treatment time and applied current density. Gas chromatography–mass spectrometry (GC–MS) analysis, performed on the wastewater samples before and after treatment, as well as on foam samples, is reported. Anode efficiency, rate constants and energy consumption were estimated and discussed. The efficiency of Ti/Pt was 0.802 kgCOD h^?1 A^?1m^?2 and 0.270 kgNH₄⁺ h^?1 A^?1m^?2, and the energy consumption was 5.77 kWh kg^?1 COD and 16.63 kWh kg^?1 of NH₄⁺. The order of efficiency of anodes was found to be Ti/Pt ? Ti/PbO₂ > Ti/MnO₂. The results indicate that the electro‐oxidation method could be used for effective oxidation of tannery wastewater and a final effluent with substantially reduced pollution load can be obtained. © 2001 Society of Chemical Industry     

计量用脉冲Nd：YAG倍频激光器及其电源

介绍了脉冲Nd:YAG倍频激光器双波长（1064／532nm）3种输出的激光光路。1064nm输出的动静比可达0.40；KTP晶体外腔倍频效率可达0.50。介绍了稳定可靠的调Q电路、逻辑控制电路和开关电源的主电路及其参数计算。     

电-Fenton法废水处理技术的研究现状与进展

电-Fenton法是一种新兴的废水处理技术,在水处理中的应用越来越受到关注。作者综述了电-Fenton技术的特性、动力学特征、各种形式及其特点,以及国内外电-Fenton废水处理技术的试验研究现状。同时提出了该技术亟待解决的突出问题和发展动向．指出高效催化性能的阴极材料的开发应用是电-Fenton法最具潜力的发展方向。