Alliance and Dropout in Family Therapy for Adolescents With Behavior Problems: Individual and Systemic Effects.

This study examined the relationship between alliance and retention in family therapy. Alliance was examined at the individual (parent and adolescent) and family levels (within-family differences). Participants were 34 families who received functional family therapy for the treatment of adolescent (aged 12-18 years) behavior problems. Families were classified as treatment dropouts (n=14) or completers (n=20). Videotapes of the first sessions were rated to identify parent and adolescent alliances with the therapist. Results demonstrated that individual parent and adolescent alliances did not predict retention. However, as hypothesized, dropout cases had significantly higher unbalanced alliances (parent minus adolescent) than did completer cases. These findings highlight the importance of alliances in functional family therapy and suggest that how the alliance operates in conjoint family therapy may be a function of systemic rather than of individual processes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

动态不确定多输入多输出系统的变结构鲁棒控制

本文仅利用输入输出数据给出了一种动态不确定多输入多输出系统的变结构控制器设计机制，控制系统的设计中引入了一个严格正实的模型．应用适当逻辑切换的状态变量滤波器实现变结构控制．证明了所提方案能保证全局输出有界稳定并能实现滑模控制和渐近跟踪参考模型的输出．该设计方案对结构不确定性具有一定的鲁棒性．仿真结果表明了所提方案的有效性．     

Hierarchical production control for a flow shop with dynamic setup changes and random machine breakdowns

In this paper, we study a manufacturing system consisting of two machines separated by two intermediate buffers, and capable of producing two different products. Each product requires a constant processing time on each of the machines. Each machine requires a constant non-negligible setup change time from one product to the other. The demand rate for each product is considered to be piecewise constant. Each machine undergoes failure and repair. The time-to-failure and time-to-repair are exponentially distributed random variables. The setup change and processing operations are resumable. We model our system as a continuous time, continuous flow process. An optimal control problem is formulated for the system to minimize the total expected discounted cost over an infinite horizon. To determine the optimal control policy structure, a discrete version of the problem is solved numerically using a dynamic programming formulation with a piecewise linear penalty function. A real-time control algorithm is then developed with the objective of maintaining low work-in-process inventory and keeping the production close to the demand. The algorithm uses a hierarchical control structure to generate the loading times for each product on each machine in real time and to respond to random disruptions in the system. The system is simulated using this algorithm to study its performance. The performance of the algorithm is also compared to alternative policies.     

Dynamic elastic-plastic buckling phenomena in a rod due to axial impact

Dynamic elastic-plastic buckling phenomena which might develop in a rod from an axial impact loading are studied in order to identify the conditions for quasi-static behaviour. A discrete model for dynamic elastic-plastic buckling, which retains the axial and the lateral inertia forces, is proposed, and the relationship between the model parameters and the characteristics of an actual structure is given. Examples of different external loadings and boundary conditions are considered in order to clarify the influence of elastic-plastic axial wave propagation on the buckling process. The critical time for the initiation of buckling is obtained and the post-buckling behaviour of the model is analysed. Particular attention is paid to the role of the striking mass on the characteristics of the buckling process and on the development of the buckling shape. The numerical study reveals that the inertia of the striking mass affects considerably the development of the buckling shape causing different patterns of axial strain distributions at the initiation of buckling. The comparisons which are made between the model predictions and some previously published experimental data show that the buckling process is governed by the impact velocity as well as by the external loading history provided by the experimental technique.     

The effect of temperature on the dynamic characteristics of heat-resistant thermoplastic composites

Two thermoplastic and two thermosetting fibrereinforced plastic composites were subjected to dynamic tests over a wide range of temperature, covering both cryogenic and hot environments. The thermal behaviour of each composite, as indicated by its dynamic mechanical properties, was assessed individually, and was compared collectively with that of the other composites.     

底敞口充气浮箱研究和试验

提出底敞口充气浮箱的结构和概念。经模型模拟试验研究分析，经典浮力定律可用于这种浮箱的浮力计算；其动充气状况还具有一定的允许伤损面积。它的研究将为水陆两用车辆增大浮力，缩小外形，提高水上自下而上能力和潜驶潜伏提供具有诱惑力的工程应用前景。     

催化裂化装置动态机理模型 Ⅱ.再生器部分

建立了前置烧焦罐式高效再生器动态机理模型。烧焦罐再生段采用轴向扩散模型，包括催化剂上碳含量、氢含量和再生温度动态分布参数方程、气体中氧含量拟稳态分布参数方程和催化剂藏量动态方程。二密相床气速低，采用气固全返混模型，并考虑了气体外扩散对烧碳速率的影响。二密相床数学模型包括再生剂碳含量和催化剂藏量的动态集中参数方程和烟气中氧含量的拟稳态代数方程。