压力流化床燃烧煤水混合燃料泵送给料技术在国外的研究进展

压力流化床燃烧技术近二十年来在世界上得到很大发展。煤的湿法给料系统具有比干法输送系统更简单，运行调节更可靠等优点。煤水混合物可泵送的水分在２５％左右，煤的粒度一般为０～６ｍｍ，表现为非牛顿的假塑性流体特性，通过级配来达到一定的稳定性和良好输送性能，且流动阻力低，不用添加剂即可实现泵送，它的应用使压力流化床的燃烧制备和输送系统成本大大降低。     

填料-旋流板脱硫塔在净化加压变脱改造中的设计与应用

阐述了以塑料阶梯环填料与带溢流锥双程叶片旋流塔板组合的新型复合脱硫塔的设计开发,其结构特点为旋流板塔板采用了双程叶片结构,溢流装置采用新型带螺旋叶片结构,塔上部设置高2.53m填料层,改进并优化了喷淋装置及气体进、出口结构等。通过实际应用,证明该型脱硫塔在净化加压变换气脱硫工序中的应用是成功的。     

局部颜色特征与工艺参数融合的铜浮选入矿类型识别

针对铜浮选过程中矿源变化频繁而造成的浮选工况难以识别、生产过程不稳定等问题,在分析铜浮选流程特点的基础上,提出了一种局部颜色特征与关键工艺参数融合的铜浮选入矿类型识别方法.首先采用多元图像处理方法提取泡沫图像局部颜色特征,然后采用混合滤波、时间配准算法将其与关键工艺参数进行数据融合,最后用融合后的混合特征进行模糊聚类,得到隶属度矩阵和聚类中心.工业数据仿真结果验证了本文所提方法的有效性.     

PLC和组态软件在送料系统中的应用

设计了基于三菱Q系列PLC以及InTouch的颗粒传送系统,提出自动颗粒传送系统的PLC程序设计方法,同时以InTouch为基础设计较为人性化的具有实时性的人机操作界面监控系统。主要阐述了上位机动态监视控制操作画面与下位机PLC数据处理系统结合,使得PLC的编程过程简单化从而使控制更为灵活,更使得PLC的功能得到拓展,其图形化交互式的人机界面,使操作更为简单。并具有实时及历史操作和报警记录。     

Feeding response of Ips paraconfusus to phloem and phloem metabolites of Heterobasidion annosum-inoculated ponderosa pine,Pinus ponderosa

In studies of feeding by the bark beetle, Ips paraconfusus, two pine stilbenes (pinosylvin and pinosylvin methyl ether), ferulic acid glucoside, and enantiomers of the four most common sugars present in ponderosa pine phloem (sucrose, glucose, fructose, and raffinose) did not stimulate or reduce male feeding when assayed on wet -cellulose with or without stimulatory phloem extractives present. When allowed to feed on wet -cellulose containing sequential extracts (hexane, methanol, and water) of ponderosa pine phloem, methanol and water extractives stimulated feeding, but hexane extractives did not. Males confined in wet -cellulose containing aqueous or organic extracts of culture broths derived from phloem tissue and containing the root pathogen, Heterobasidion annosum, ingested less substrate than beetles confined to control preparations. In an assay using logs from uninoculated ponderosa pines, the mean lengths of phloem in the digestive tracts increased as time spent feeding increased. Males confined to the phloem of basal logs cut from ponderosa pines artificially inoculated with H. annosum ingested significantly less phloem than beetles in logs cut from trees that were (combined) mock-inoculated or uninoculated and did not contain the pathogen. However, individual pathogen-containing treatments were not significantly different from uninoculated controls. It was concluded that altered feeding rates are not a major factor which may explain why diseased ponderosa pines are colonized by I. paraconfusus.     

Taste thresholds and suprathreshold responses to tannin-rich plant extracts and quinine in a primate species (Microcebus murinus)

Theories of plant chemical defenses discriminate between quantitative digestibility reducers (e.g., tannins) and qualitative toxins (e.g., alkaloids). Since the differential effect on taste of these compounds is poorly known, we recorded ingestive responses of a primate species, Microcebus murinus, to four tannin-rich plant extracts and to quinine, by using the behavioral method of the two-bottle test. The efficiency of tannic extracts at precipitating protein was measured with the blue BSA method. Inhibition taste thresholds for tannins added to a moderately sweet solution varied between 0.25 and 2 g/l. The threshold for quinine hydrochloride was 0.32 g/l. The profiles of the response/concentration curves established for these astringent and bitter substances were similar, with maximal inhibition of consumption occurring for near-threshold concentrations. The large amounts of quinine required to deter this small-bodied species from feeding were unexpected, given its unspecialized frugivorous/insectivorous diet. We propose that the taste responses of Microcebus to tannins have been shaped in relation to the widespread occurrence of efficient polyphenols in food plants, while low responsiveness to quinine reflects a low risk of ingesting toxic alkaloids when feeding on ripe fruits and insects.     

新型螺旋式浓硝酸漂白塔及其应用

针对传统的帽罩式浓硝酸漂白塔存在的缺点和不足，找出原因并予以改进，开发研制出螺旋式浓硝酸漂白塔，改进了工艺状况，减少了维修工作量，达到了节能降耗的目的，确保了直接法浓硝酸装置的长周期运行。     

向家坝水电站不同埋设方式蜗壳结构有限元分析

针对向家坝地面电站,采用三维有限元法分析比较蜗壳不同埋设方式下的流道及其外围混凝土结构的静力特性,为蜗壳埋设方式的选择提供依据。研究表明:直埋方案所需配筋最多,不经济,且可能产生贯穿性裂缝;垫层方案应力普遍较小,垫层沿水流向敷设至蜗壳45°断面的组合方案仅局部区域有较大拉应力。推荐采用垫层埋设方式或垫层敷设至蜗壳45°断面的组合埋设方式,但同时应采取有效工程措施避免局部产生贯穿性裂缝。     

木塑复合材料制品一步法挤出成型技术的研究

介绍了木塑复合材料制品一步法挤出成型中常见的5种挤出设备,提出了选择这些设备时需要考虑的一些因素,分析了木塑复合制品挤出成型技术中温度、压力、喂料和排气等问题产生的原因。并结合实验和理论,从螺杆、机筒、机头设计和加料器选择等方面提出了解决这些问题的措施。