丙烯酸接枝聚丙烯纤维的结构与性能

本文研究了用化学引发剂引发丙烯酸接枝聚丙烯纤维的某些影响因素。红外光谱分析表明，丙烯酸接枝在聚丙烯大分子链的叔碳原子上。Ｘ－射线衍射和ＤＳＣ分析指出，纤维接枝后结晶度有所增加，接枝前纤维存在的β－变体转化成了α－变体，接枝纤维的吸湿性、离子交换容量和染色性随接枝率增加而增大。接枝纤维的力学性能有所下降。     

饲料级磷酸氢钙中氟的几种分析方法比较

本文采用茜素络合酮比色法和氟离子选择电极法对饲料磷酸氢钙进行氟的测定实验对比,得出常用的氟离子选择电极法完全可以代替经典的蒸馏比色法的结论。     

The multi-structure of oxidized-reduced tungsten carbide surface(s)

The XPS of bulk tungsten carbide, partially oxidized WC surfaces at 373 and 573 K as well as tungsten trioxide have been reported. Bulk WC has been prepared from WO₃ as a starting material in a mixture of CH₄ (20%) and H₂ (80%) at 1150 K for 4 h, while partially oxidized WC surfaces were prepared by oxygen chemisorption on a clean WC surface at 200 K, then the temperatures were raised to 373 and 573 K respectively. The XPS of a freshly prepared WC reveals the presence of a small amount of WO₃ on the surface and a slightly higher concentration in the bulk. The oxygen-exposed fresh WC surfaces and surfaces treated at temperatures higher than 373 K show the presence of WO₃ in a considerable quantity depending on the length and the treatment temperature. Ar⁺ bombardment of this partially oxidized surface reduces WO₃ to WO₂ and W(0), while WC is partially reduced to W(0). Isomerization reactions of alkanes on oxygen-exposed WC surface occurs in reality on a composite surface structure containing WC, WO₃, WO₂ and elemental W(0).     

Electrodeionisation 3: The removal of nickel ions from dilute solutions

The removal of nickel ions from dilute solutions using a process that combines an ion-exchange bed with electrodialysis has been studied. The main aspects include: the concentration of nickel ions in the diluate, the voltage over the cell and the current density distribution along the ion-exchange bed. The current density distribution provides insight into the state of the bed as it is simultaneously loaded with Ni²⁺ and regenerated with an electric potential difference applied perpendicular to it. A simple model is used to describe the state of the bed and the quantity of nickel removed from it as a function of time. Under specific conditions the precipitation of metal hydroxides is observed in the compartment containing the ion-exchange bed. The results show that hydroxide precipitation is related to the nickel concentration in solution and the electric potential gradient across the bed.     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.     

离子注入机的国内外现状

本文简要介绍了离子注入和器件的关系,概述了离子注入机的发展现状和趋势,初步探讨了我国离子注入机不能形成产业的原因。     

强流质子直线加速器中束晕现象研究

从束流包络方程与单粒子运动方程联立模型出发，考虑了纵向能量方程的耦合，研究了强流质子直线加速器中的束晕现象。采用相交间的Ｐｏｉｎｃａｒｅ截面方法和实空间Ｐｏｉｎｃａｒｅ截面方法，研究了周期聚焦系统失配的情况下束晕的形成以及加速对束晕形成的影响。     

小型腔式微波离子源的研制

研制了１种用在离子束细胞刻蚀装置中的小型腔式微波离子源，它由石英放电管、同轴谐振腔和封装在管一端的二电极引出系统组成。该源由同轴腔激发起的表面波在石英管内产生等离子体柱。为了提高柱末端等离子体离子引出流密度，选用了在内径７．０ｍｍ直管的一端加上一内径５．０ｍｍ衬管的放电管。在微波频率为２．４５ＧＨｚ，输入功率为９３Ｗ下，氮的引出流密度分别为４８．４ｍＡ／ｃｍ２和９１．７ｍＡ／ｃｍ２。这种表面波放电等离子体源体积小、结构简单，可在较宽的压强范围内产生重复性好、工作稳定的等离子体柱。     

离子交换法合成三氨基胍叠氮酸盐

三氨基胍叠氮酸（ＴＡＺ）分子中的含氮量高达８５．７％，燃烧分解时不仅－Ｎ３可释放３６７ｋＪ／ｍｏｌ的键能，而且放出大量的氮气，是一个提高比冲，降低燃烧温度的理想的推进剂两组分之一。