充油S-SBR加工行为的研究

在中试装置上合成相对分子质量分布较宽的充油S-SBR，考察不同环烷油和芳烃油填充量的充油S-SBR的流变性能和混炼行为。结果表明，增大油的填充量能提高充油S-SBR的流动性能，充芳烃油S-SBR相对于充环烷油的S-SBR对温度更敏感，宽相对分子质量分布的充环烷油S-SBR的混炼性能优于S-SBR1204及E-SBRl778，竟相对分子质量分布的充芳烃油S-SBR的混炼性能优于S-SBR1204，Solprene380和E-SBR1712。     

淮河流域水资源短缺风险评估与时空分析

根据2003-2013年淮河流域五省的降水量、径流系数、人均水资源量、人均GDP、人口密度等相关数据,构建水资源短缺风险评价体系,用熵权法对指标赋值,运用可变模糊模型对淮河流域及各省的水资源短缺风险进行评估和时空差异分析。结果表明:2003-2013年间淮河流域水资源短缺风险值总体较高,且呈缓慢的增长趋势,2004年降水较少,风险值达到最高;十年间河南省风险增加最为明显,而山东省较为稳定,风险增加也最低;在淮河流域五个区域中,河南省的风险程度最高,达到3.52;江苏省、山东省次之;安徽省和湖北省相对较低,达到2.86和2.51。水资源短缺风险二级指标分析发现,危险性最强的是河南省,安徽省最小;水资源短缺易损性最强的是山东省,湖北省最小;水资源短缺暴露性最强的是江苏省,山东省最小;水资源短缺可恢复性最好的是湖北省,河南省最差。同时,所有评价指标中人口密度、人均GDP、降水量对水资源短缺风险的影响较大。     

应用质谱扫描测定胸腺肽相对分子质量

目的 精确测定胸腺肽相对分子质量分布。方法 采用质谱扫描法。结果 3批胸腺肽相对分子质量均在2000～4000,无10 000以上的大分子蛋白。结论 本方法灵敏度高,可直观地测定胸腺肽相对分子质量分布状况,为控制胸腺肽质量提供了新的检测方法。     

Oxidative stability of high-fatty acid rice bran oil at different stages of refining

The contents of natural antioxidants and the oxidative stability of rice bran oils at different refining steps were determined. Tocopherols and oryzanols were constant in crude and degummed oils but decreased in alkali-refined, bleached and deodorized oils. The process of degumming, alkali-refining, bleaching and deodorization removed 34% of the tocopherols and 51% of the oryzanols. During storage of deodorized oil for 7 wk, 34% of the tocopherols and 19% of the oryzanols were lost. The maximum weight gain, peroxide value and anisidine value were obtained from alkali-refined oil during storage. The order of oxidation stability was crude ≥ degummed > bleached = deodorized > alkali-refined oil.     

UASB-SBR工艺处理城市生活污水的研究

研究了UASB工艺处理城市生活污水的可行性，通过UASB与SBR组合工艺的运行实验，得出在水力停留时间3h时，COD去除率为61．67％-82．32％，出水COD达到国家污水排放二级标准。在氮磷去除效果不佳的情况下，采用SBR工艺处理后，其出水COD、SS、氮、磷等指标均达到国家污水一级排放标准。     

High molecular weight polypropylene nanospheres: Synthesis and characterization

The high molecular weight (MW) polypropylene with average particle size of 60 nm was synthesized by controlled growth mechanism using Ziegler–Natta catalyst. The atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) studies showed that PP nanoparticles were spherical in shape. Structure and crystallinity were concomitantly studied through Fourier transform infrared spectroscopy and X‐ray diffraction, respectively. It shows nanospherical PP particles with more crystallinity (～ 75%) compared with macrosized PP (～ 59%). In addition, differential scanning calorimetry studies revealed the finite particle size effect on T_g and the scale dependence T_g followed a first order exponential trend. As particle size goes down to nano‐ scale from macrosize, continuous elevation of T_g's were observed from ?25 to ?11°C. This phenomenon was directed to configuration entropy of single spherical nanoparticles of PP. The mechanical properties and surface roughness were also evaluated through AFM. At last, the properties of nanosized PP were compared with micron and macrosized particles. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

超高分子质量聚乙烯纤维黏结强度增强方法研究

为提高超高分子质量聚乙烯(UHMWPE)纤维复合材料中纤维与树脂基体之间的界面黏结强度,提出通过不同质量分数的硅烷偶联剂KH-570处理纳米SiO_2对UHMWPE纤维进行表面改性。对改性处理后的纤维与乙烯基酯树脂进行黏结强度试验,发现硅烷偶联剂处理纳米SiO_2能有效提高纤维的界面黏结强度,同时使纤维保持一定的断裂强度。     

阻垢缓蚀剂对不锈钢管缓蚀效果的评定方法

用点蚀电位法和失重法评价了七种阻垢缓蚀剂在不同冷却水样中对不锈钢的缓蚀效果。用腐蚀失重法评价阻垢缓蚀剂对不锈钢的缓蚀效果，既不合理也很难测准。点蚀电位法是评价阻垢缓蚀剂对不锈钢缓蚀效果的有效方法，但要选择合适的空白水样。     

The Estimation of the Molecular Weight of Polytetrafluoroethylene Based on the Heat of Crystallisation. A Comment on Suwa's Equation

Summary: The influence of number‐average molecular weight ranging from 1.4 · 10⁴ to 1.2 · 10⁶ g/mol on the thermal behaviour of polytetrafluoroethylene (PTFE) has been studied. Samples have been prepared by radiation‐induced degradation of commercial PTFE. The molecular weight has been calculated using end‐group concentration determined by infrared (IR) spectroscopy and ¹⁹F solid‐state nuclear magnetic resonance (NMR) spectroscopy. Melting and crystallisation heats were investigated by differential scanning calorimetry (DSC). The results have been discussed with respect to quantitative relationships between number‐average molecular weight and heat of crystallisation of PTFE described in the literature. The molecular weight calculated from Suwa's equation, which is often used in the literature, has been found to be too low.

Concentration of end‐groups and the molecular weight of PTFE versus the irradiation dose.     

高固体分丙烯酸树脂相对分子质量的研究

采用溶液聚合法合成高固体分丙烯酸树脂,用凝胶渗透色谱(GPC)法分析引发剂的种类和用量、反应温度及聚合工艺对丙烯酸树脂的相对分子质量及其分布的影响。结果表明,选用偶氮二异丁腈和过氧化苯甲酰两种引发剂进行复配可提高聚合物的相对分子质量;采用“饥饿态”聚合工艺进行聚合反应可有效控制聚合物的相对分子质量,且相对分子质量分布均匀,分散度小于2;当引发剂用量为2%,在110℃的反应条件下制得的丙烯酸树脂的综合性能优异,固含量超过70%,相对分子质量可达4万。