Ozone Treatment of Surface Water to Provide High Quality Cooling Water and Process Water

The characteristic feature of this cooling tower water treatment is the intermittent addition of ozone for several days.     

Inhibition effect of some polymers on the corrosion of cadmium in a hydrochloric acid solution

The effects of poly(vinyl alcohol) (PVA), poly(acrylic acid) (PAA), sodium polyacrylate (NaPA), poly(ethylene glycol) (PEG), pectin (P), and carboxymethyl cellulose (CMC) on the corrosion of cadmium in a 0.5M hydrochloric acid (HCl) solution were studied with both electrochemical impedance spectroscopy and Tafel plot techniques. Measurements were carried out at cathodic, open‐circuit, and anodic potentials. All the investigated polymers had inhibitory effects on both the cathodic (except for NaPA, P, and CMC) and anodic processes, with a predominant anodic inhibiting action. However, NaPA, P, and CMC exhibited a slight cathodic inhibiting action only at higher polymer concentrations. This behavior may be attributed to the very weak adsorbability of the polymers on the cathodic sites. Because PVA and PEG had hydroxy groups, there could be bridging between the polymer and the surface, resulting in an inhibiting effect in the HCl solution. However, PVA had much greater adsorbability on the surface than PEG at the anodic potential. The adsorption of most of the polymers obeyed a Temkin adsorption isotherm, and this indicated indicating that the main process of inhibition was adsorption. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 866–871, 2003     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

CO2/R170混合物作为复叠式制冷系统低温环路制冷剂的性能

针对CO2/R170混合物在复叠式制冷系统低温环路使用的工况，建立了固液平衡和汽液平衡的数学模型，决定了保证混合物在较低温度下不结晶的配比。在一定的配比范围内对混合物进行了循环性能和可燃性分析。研究了混合物配比对循环性能参数和可燃性的影响，以及中间温度在高温环路使用R290、低温环路使用CO2/R170混合物时，复叠式制冷系统整体制冷系数（COP）的变化趋势。研究表明，这种混合物适宜作为复叠式制冷系统低温环路的制冷剂。     

TGA analysis of γ‐irradiated linear low‐density polyethylene

Linear low‐density polyethylene (LLDPE), based on butene‐1 or hexene‐1, was irradiated with γ‐rays under vacuum or in the presence of air. The study focused on the influence of the dose rate and the γ‐dose on the thermal properties of LLDPE. Differential scanning calorimetry, thermogravimetric analysis (TGA), and TGA/FTIR techniques were used to address the thermal behavior as a result of γ‐irradiation. During this irradiation, competition between crosslinking and scission reactions, subsequent to oxidation reactions, occurred in the polymeric material, which strongly depends on the experimental conditions. A decrease of the crystallinity for γ‐irradiated samples was observed in particular for samples irradiated under vacuum. This observation may be explained by increased hindrance of segment mobility due to crosslinking reactions that prevent crystal growth. TGA investigations revealed an enhancement of the thermal stability for samples irradiated under vacuum but not for those irradiated in air. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2790–2795, 2006     

应用WCA微扰理论推算非极性液体比热容的新方法

本文首次将统计热力学的Ｗｅｅｋｓ－Ｃｈａｎｄｌｅｒ－Ａｎｄｅｒｓｏｎ（简称ＷＣＡ）微扰理论应用于非极性液体定容比热容和定压比热容的推算，用一些液体的ｐ－ｖ－Ｔ实验数据拟合了理论中所用ＬＪ势能函数的势能参数，并提出一个通用关联式。本文方法具有通用性，在编制的计算程序中只需输入物质的临界温度、临界比容、偏心因子等就能算出相应的比热容，工程应用十分方便。     

Kinetics of microwave‐assisted polymerization of ϵ‐caprolactone

The kinetics of polymerization of ?‐caprolactone (CL) in bulk was studied by irradiating with microwave of 350 W and frequency of 2.45 GHz with different cycle‐heating periods (30–50 s). The molecular weight distributions were determined as a function of reaction time by gel permeation chromatography. Because the temperature of the system continuously varied with reaction time, a model based on continuous distribution kinetics with time/temperature‐dependent rate coefficients was proposed. To quantify the effect of microwave on polymerization, experiments were conducted under thermal heating. The polymerization was also investigated with thermal and microwave heating in the presence of zinc catalyst. The activation energies determined from temperature‐dependent rate coefficients for pure thermal heating, thermally aided catalytic polymerization, and microwave‐aided catalytic polymerization were 24.3, 13.4, and 5.7 kcal/mol, respectively. This indicates that microwaves increase the polymerization rate by lowering the activation energy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1450–1456, 2004     

Effect of Twin-Plane Reentrant Edge on the Coarsening Behavior of Barium Titanate Grains

When BaTiO₃ ceramics were sintered at relatively low temperatures (≤1250°C), the grains with reentrant edges caused by a (111) double twin grew exclusively. As a result, a microstructure with a bimodal grain-size distribution composed of platelike large grains and fine matrix grains was obtained. In contrast, at the usual sintering temperature between 1250° and 1350°C, grains containing a (111) double twin did not exhibit any growth advantage. In this case, a coarse and uniform microstructure was obtained. When this coarse-grained specimen was further heat-treated at 1365°C, the grains possessing a double twin were observed to grow exclusively again. The results were explained in terms of a coarsening process controlled by two-dimensional nucleation.     

湿法腈纶生产的含腈废水处理实验研究

采用不同方法对湿法腈纶废水进行预处理，比较了它们的处理效果和特点。研究中使用的菌种预处理方法达到了理想的效果，废水中大分子有机污染物被迅速、高效地分解为挥发性脂肪酸和氨氮等，为后续的接触氧化以及反硝化创造了良好的条件，COD和TKN的总去除率分别为92％和85％，最终出水达到或优于行业二级排放标准。     

Enhanced surface morphologies of screen-printed carbon nanotube films by heat treatment and their field-emission properties

A heating process for obtaining free-standing carbon nanotube emitters is presented with the aim of improving field-emission properties from the screen-printed multiwalled carbon nanotube (MWCNT) films. Using an atmosphere with an optimum combination of nitrogen and air for heat treatment of CNT films, the CNT emitters can be made to protrude from the surface. This allows for a high emission current and the formation of very uniform emission sites without special surface treatment. The morphological change of the CNT film by this technique has eliminated additional processing steps, such as surface treatment which may result in secondary contamination and damage to the film. Despite its simplicity the process provides a high reproducibility in emission current density which makes the films suitable for practical applications.