ITER极向场线圈销轴表面硬化工艺研发

ITER极向场线圈(PF)磁体支撑销轴承载极向场线圈和部分真空室的质量,因使用环境非常恶劣,所以对其表面硬度及耐磨性能有很高的需求。按照ITER极向场线圈销轴的设计要求,研发了两种表面硬化处理方式,包括无界面N离子注入361LN强化处理以及采用在不锈钢表面堆焊一层马氏体不锈钢ER414L的方式分别不同程度地增加基底材料的表面硬度以及耐磨性能,可以满足小尺寸及超大型部件的表面硬化设计需求。     

Optimization of A-TIG process parameters using response surface methodology

In the present work, the influence of process parameters such as welding current (I), welding speed (S), and flux coating density (F) on different aspects of weld bead geometry for example depth of penetration (DOP), bead width (BW), depth to width ratio (D/W), and weld fusion zone area (WA) were investigated by using the central composite design (CCD). 9–12% Cr ferritic stainless steel (FSS) plates were welded using A-TIG welding. It was observed that all input variables have a direct influence on the DOP, BW, and D/W. However, flux coating density has no significant effect on WA. Mathematical models were generated from the obtained responses to predict the weld bead geometry. An optimized DOP, BW, D/W, and WA of 6.95?mm, 8.76?mm, 0.80, and 41.99?mm², respectively, were predicted at the welding current of 213.78 A, the welding speed of 96.22?mm/min, and the flux coating density of 1.99?mg/cm². Conformity test was done to check the practicability of the developed models. The conformity test results were in good agreement with the predicted values. Arc constriction and reversal in Marangoni convection were considered as major mechanisms for the deep and narrow weld bead during A-TIG welding.     

Fabrication of Titanium Aluminides via Powder-Cored Wire Arc Additive Manufacturing: Microstructural and Mechanical Characterization

Herein, an innovative powder-cored wire arc additive manufacturing (PC-WAAM) process is proposed to fabricate γ-TiAl thin-walled intermetallic alloy. The metallography, phase composition, and mechanical properties at different thin-wall locations are characterized. The results show that the alternatively distributed layer-like microstructure composed of α₂ (Ti₃Al) and γ (TiAl) phases is obtained along the building direction. The content of α₂ phase exhibits the tendency of decreasing from the bottom to top region. This unique microstructure characteristic is closely related to the typical thermal cycling history during deposition. Moreover, the tensile strength and microhardness of the top region are lower than the middle and bottom region. In general, the current PC-WAAM technique shows promising capability of fabricating γ-TiAl intermetallic alloy with low cost. This work becomes a valuable reference for understanding the evolution mechanism of microstructure and paves the way for the flexible and customized additive manufacturing of γ-TiAl alloy.     

CHV190系列变频器在永磁同步电机驱动矿井提升机中的应用

本文分析了矿井提升机的运行特点,详细阐述了英威腾CHV190系列起重提升专用变频器用于永磁同步电动机驱动的节能型矿井提升机的选型配置原则,最后介绍了应用现场的调试步骤及注意事项。     

一种新型的加固计算机箱设计

介绍了一种新型加固计算机机箱,其独特的双层箱体结构,使它适合在各种复杂恶劣的环境条件下使用。通过设计实践,阐述了该箱体的结构特点和密封、隔振缓冲、电磁兼容等方面的具体解决方法,特别是箱体成型和综合热设计等关键技术。经环境试验和工程实际应用的检验,证明其具有较好的综合防护性能。     

A quantitative multimodal discourse analysis of teaching and learning in a web-conferencing environment – The efficacy of student-centred learning designs

This paper presents a quantitative approach to multimodal discourse analysis for analyzing online collaborative learning. The coding framework draws together the fields of systemic functional linguistics and Activity Theory to analyze interactions between collaborative-, content- and technology-related discourse. The approach is used to examine how the task subject matter, the activity design, and the choice of interface affected interaction and collaboration for a computing course conducted in a web-conferencing environment. The analysis revealed the critical impact of activity design on the amount and type of discourse that transpired. Student-centred designs resulted in over six times more student discourse as compared to teacher-centred designs and created a learning environment where students took greater ownership over the tasks and contributed more to the content-based discussion. The paper also incorporates a rationale for the approach to coding and a reflection on its efficacy for discourse analysis in technology-based learning environments.     

"Publishing opinions: A note on the usefulness of commentaries": Comment.

Comments on J. J. Christensen-Szalanski and L. R. Beach's (see record 1984-21471-001) conclusion that the attention given to commentaries and replies to articles did not justify the extra space and argues that citation indexes do not measure the major usefulness of these commentaries. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Using online collaboration applications for group assignments: The interplay between design and human characteristics

In recent years, educators and students are increasingly employing online collaboration applications such as Google Docs™ and PBWorks™ for group projects and assignments. Yet, the effectiveness of these emerging technologies has not been rigorously examined. Anchoring upon and informed by the existing literature, two design characteristics – sociability and visibility, and two human characteristics – gender and age, are focused on, which are salient in online collaboration applications. A field experiment was conducted to examine the direct and moderating effects of design and human characteristics on learning outcomes. The research found that sociability improved process satisfaction and positive social environment while visibility enhanced academic performance and solution satisfaction of learners. Males had higher solution satisfaction while older learners had higher academic performance. Moderating effects were also found. Both theoretical and practical implications are drawn. In particular, a rubric for online collaboration application selection for academic performance is conceived. This study provides empirical support for online collaboration application effectiveness in education which will augur well for future adoption, use and evolution.     

A regularization method for a Cauchy problem of Laplace's equation in an annular domain

In this paper, we propose a new regularization method based on a finite-dimensional subspace generated from fundamental solutions for solving a Cauchy problem of Laplace's equation in an annular domain. Based on a conditional stability for the Cauchy problem of Laplace's equation, we obtain a convergence estimate under the suitable choice of a regularization parameter and an a-priori bound assumption on the solution. A numerical example is provided to show the effectiveness of the proposed method from both accuracy and stability.