荷能束辐照致使Cu/Ag表面偏析的研究

本文研究了金属(Cu)/金属(Ag衬底)系统的荷能束辐照引起的表面偏析现象。观察到Cu在多晶Ag衬底上溅射淀积过程中,Ag原子在Cu膜表面的偏析,且淀积Cu原子能量越大,Ag原子偏析程度越大,即观察到了淀积Cu原子10~(-1)～1eV量级的平均能量差异对膜层表面偏析行为的影响。对溅射淀积所得膜层进行keV量级的离子束辐照,Ag原子的表面偏析程度更甚。     

再生用碱的质量对阴离子交换树脂性能的影响

我国许多电厂在再生阴离子交换树脂时都习惯采用隔膜法生产的工业氢氧化钠，这种氢氧化钠中的杂质离子含量较高，会对阴离子交换树脂的性能产生很大的影响。就碱中杂质成分对阴离子交换树脂的影响，通过比较两种不同纯度的碱再生后的阴离子交换树脂的技术经济性，提出再生阴离子交换树脂时应优先选择纯度较高的碱。     

油气微运移的烃类相态

微运移机制是目前油气化探等非地震直接找油的理论基础,只有研究清楚油气微运移的相态,才可能进一步研究微运移的机制;含油气水相是油气发生微运移最普遍和优先起作用的相态;在特定的地质条件下,不排除油气以其它相态发生渗漏的可能。     

离子交换铒掺杂磷酸盐玻璃波导特性研究

给出有关离子交换铒掺杂磷酸盐玻璃波导的制备以及发光特性的基本结果。用Ag+ Na+ 离子交换在含有适量氧化钠的铒掺杂磷酸盐玻璃上很容易实现低损耗平面波导 ,并且离子交换过程对这种玻璃的光谱特性没有影响。     

Interfacial reactions in In-Sn/Ni couples and phase equilibria of the In-Sn-Ni system

The In-Sn-Ni alloys of various compositions were prepared and annealed at 160°C and 240°C. No ternary compounds were found; however, most of the binary compounds had extensive ternary solubility. There was a continuous solid solution between the Ni₃Sn phase and Ni₃In phase. The Sn-In/Ni couples, made of Sn-In alloys with various compositions, were reacted at 160°C and 240°C and formed only one compound for all the Sn-In alloys/Ni couples reacted up to 8 h. At 240°C, Ni₂₈In₇₂ phase formed in the couples made with pure indium, In-10at.%Sn and In-11at.%Sn alloys, while Ni₃Sn₄ phase formed in the couples made of alloys with compositions varied from pure Sn to In-12at.%Sn. At 160°C, except in the In/Ni couple, Ni₃Sn₄ formed by interfacial reaction.     

Application of annexation principle of thermodynamic property of In-Pb-Sb and In-Bi-Pb melts

Based on the principle of annexation and phase diagrams, the structural units of In-Pb-Sb and In-Bi-Pb melts were determined, and their calculating models of mass action concentrations were formulated. Calculated results agree well with practical values, which in turn show that the models deduced can reflect the structural realities of corresponding melts and the principle of annexation is applicable not only to some binary metallic melts, but also to ternary metallic melts.     

Voltage sag compensation with minimum energy injection by use of a micro‐SMES

This paper presents a method to compensate voltage sags with minimum energy injection for a series‐connected voltage restorer using a micro‐SMES. A circuit for extracting the fundamental symmetrical components from sag voltages and a minimum energy injection algorithm is described. Simulations of voltage sag compensation have been carried out using PSCAD/EMTDC for various faults. The simulation results confirm the validity of the proposed method and show the possibility of reducing the size of energy storage devices. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 70–80, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10047     

奎宁印迹聚合物的吸附与识别特性的研究

以奎宁为模板分子 ,利用分子印迹技术合成了一种新型的类似于人工受体的印迹聚合物 ,研究了它对奎宁和其它底物的吸附特性和选择性识别能力 ,并对其固相萃取性能做了初步的研究。     

日产NHR-90W型催化剂失活原因分析

对日产NHR -90W催化剂在抚顺石化分公司石油二厂 6万t/a石蜡加氢装置运行情况进行了研究 ,证明该催化剂活性较高 ,对原料的适应性也较强。同时 ,对造成催化剂短期内失活的原因进行了分析 ,认为原料中铁离子含量过高是造成催化剂失活的主要原因。对相关装置生产控制提出了建议