磨削加工中磨削液对砂轮堵塞影响的试验分析

砂轮堵塞是影响砂轮耐用度的重要指标，磨削液在磨削加工中起到润滑、冷却、清洗等作用，对砂轮的堵塞有着较大影响．文章通过试验，分析了磨削液对砂轮堵塞的原因．     

硫脲法从低品位含金硫化矿及其焙砂酸浸渣中回收金

本工作采用硫脲法从钴铜硫化矿及其经硫酸化焙烧,酸浸钴铜后的渣中对低品位金进行了浸取研究.直接浸取硫化矿,金的溶出率低,操作参数如电位、pH值等不稳定,试剂耗量大;而从酸浸渣中浸取金的溶出率高,可达91.0%以上,数据重现性好,试剂消耗大大降低,操作稳定.优化了浸取条件,从而降低了硫脲消耗,耗量是1.78kg/t矿.最后,用还原铁粉和活性炭从硫脲浸取富液中回收金进行了探索,效果良好.试验结果表明,硫脲法具有潜在的工业性应用推广价值.     

Concurrent reading while writing revisited

A modification is proposed to Peterson's construction of 1-writern-reader multivalued atomic shared variableusingn+2 multivalued safe variables and some boolean atomic variables. The resulting construction is elegant and is simpler than the original one. K. Vidyasankar received B.E. (Elec. Engg.) from Thiagarajar College of Engineering, Madurai, M. Tech. from I.I.T. Kanpur, India, and Ph.D. in Computer Science from University of Waterloo, Canada. He is now an Associate Professor in Computer Science at Memorial University of Newfoundland, Canada. His research interests include concurrency control and recovery in database systems, concurrency in interprocess communication, design and analysis of algorithms, and graph theory.A prelininary version of this paper, under the title Improving Peterson's Construction of 1-Writern-Reader Multivalued Atomic Register, appears in the Proc. 26th Annual Allerton Conference on Communication, Control, and Computing, University of Illinois at Urbana Champaign, September 1988, pp 693–700     

Modelling of the mist formation in a segmented grinding wheel system

It has been found that using a segmented grinding wheel with a fluid chamber can significantly minimise the quantity of coolant while improving the ground surface integrity. The present investigation aims to explore the fluid flow mechanism in such a wheel system. To this end, the Weber theory for Newtonian jet instability was applied to quantitatively determine the contribution of coolant flow rate to mist and ligament modes. A semi-analytical model was then developed to predict the mist flow rate by taking into account both the grinding parameters and fluid properties. It was shown that the model prediction was in good agreement with experimental measurements. Because of the comprehensive integration of variables in the formulation, the model provides a good fundamental understanding of the mist formation and offers a practical guideline for the selection and use coolant in minimising the mist flow rate.     

从铜镉渣中回收镉的试验研究

本文介绍了从铜镉渣中回收镉的试验研究情况，采用酸浸-铜镉渣中和-锌粉除铜法处理铜镉渣，工艺简单合理，镉直收率高，有一定的推广价值。     

细磨活化对白钨矿浸取行为的影响SCIEI

本文研究了细磨活化对白钨矿浸取行为的影响.实验结果表明,细磨活化后白钨矿在HCl-Na_3PO_4介质中的浸出速率显著加快,钨的浸出率由原来的约8％提高到99％以上.红外光谱和X射线分析结果表明,细磨除了使白钨矿比表面积显著增大外,还在固体的表面和内部产生缺陷结构,增加了矿物表面的反应活性,改善了白钨矿的分解,使得白钨矿的浸出能在较低的温度顺利进行。     

古代铜镜复制工艺的探讨

复制古代铜镜，要经过铸型制作，铜合金熔炼，镜体研磨等工艺过程。经过反其实验研究，获得了较为理想的铸型制作方法。对铜合金配比的优化及研磨镜面作了深入的讨论。     

Selective leaching of vanadium from V-Ti magnetite concentrates by pellet calcification roasting-H_2SO_4 leaching process

A novel method of pellet calcification roasting-H_2 SO_4 leaching was proposed to efficiently separate and extract vanadium(V) from vanadium-titanium(V-Ti) magnetite concentrates.The leaching rate of V is as high as 88.98%,while the leaching rate of impurity iron is only 1.79%.Moreover,the leached pellets can be used as raw materials for blast furnace ironmaking after secondary roasting.X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy with energy dispersive X-ray spectrometry(SEMEDS) analyses showed that V~(3+) was oxidized to V~(5+) after roasting at 1200℃,and V~(5+) was then leached by H_2 SO_4.X-ray diffraction(XRD) analyses and single factor experiment revealed a minimal amount of dissolved Fe_2 O_3 during H_2 SO_4 leaching.Therefore,a high separation degree of V and iron(Fe) from V-Ti magnetite concentrate was achieved through H_2 SO_4 leaching.Compared with the traditional roastingleaching process,this process can achieve a high selectivity of V and Fe,and has excellent prospects for industrial production.     

煤粉炉粉煤灰提取氧化铝活化技术研究进展

介绍了近年来采用煤粉炉粉煤灰作为原料制备氧化铝的预处理活化工艺技术,指出了粉磨法、硫酸法、氯化钙法、铵盐法、碳酸盐法、氟化盐法、物理-化学联合活化法的优缺点及在工程转化过程中需重点关注的环节。虽然部分工艺技术实现了工业化,但因成本高等因素导致项目关停,建议粉煤灰综合利用研究方向应以工程转化难点问题为导向,理论研究与工程设计相结合,逐步探索出一条经济效益好、安全环保的粉煤灰制备氧化铝工业化路线。     

碳质金矿中碳质物及其“劫金”机理研究进展

碳质金矿是重要的难处理金矿资源之一,碳质物“劫金”是金浸出率低下的主要原因。碳质物组分复杂,不同组分的碳质物的“劫金”能力和“劫金”行为存在差异,磨矿和浸出环节对碳质物的“劫金”能力也会产生影响,这些因素均能直接影响金的浸出率。通过系统总结碳质金矿中碳质物在组成特征、“劫金”机理及“劫金”能力的影响因素等方面的研究进展,对碳质物“劫金”机理现有研究工作的不足及未来研究方向进行了探讨,为碳质金矿碳质物劫金机理及预处理工艺的研究提供了重要参考。