镇沅金精矿选择性固砷焙烧—氰化浸出新工艺研究

对云南镇沅金矿的难当金精矿进行了选择性固砷焙烧－氰化浸出的试验研究，取得了满意结果。砷固定率大于９２％，硫挥发率为７８％－８４％，金浸出率可达９１％－９３％。选择性固砷焙烧－氰化浸出新工艺可有效消除砷害，综合利用有价成分硫，特别适宜于含砷高硫，同时含碳等杂质的细粒浸染型难浸金矿石的处理，在我国有较大的发展前景。     

大豆蛋白分离工艺研究

阐述了大豆蛋白质的分离原理,分析了运用“碱提酸沉”分离法提取大豆蛋白质过程中,豆粕的粉碎方式、浸提温度、浸提时间、浸提液的pH值以及离心工艺对提取效果的影响,为大豆蛋白／聚丙烯腈纤维的工业化生产提供了依据。     

从氯化铅渣中回收铅铋的研究

本文以柿竹园有色金属矿粗铋火法精炼、气化除铅产出的铅渣为原料，在常压下采用氯化钠水溶液进行浸出处理，有效地分离了铅和铋，并将铅制成了化工产品黄丹及硫酸铅     

高能球磨制备非晶态合金研究的进展

本文评述了目前混合基元粉末机械合金化（ＭＡ）及金属间化合物或合金粉末机械研磨（ＭＧ）制备非晶态合金的研究进展，讨论了机械合金化及机械研磨形成非晶态合金的机制。     

极压,油性添加剂在磨削过程中的作用

油性及极压添加剂为磨削液中主要减摩添加剂，本文从物理及化学两个方面分析了两种添加剂在磨削过程中的作用机理，说明了两种添加剂的相辅作用，并采用不同的磨削液进行了实验验证．     

水平井现场地质导向方法及其应用

为了降低水平井的钻探工程成本，要尽量不钻或少钻导眼井段。根据水平井在钻前准备、深度预测、稳定井斜、水平导入4个阶段的不同作业特点，依据现场施工经验，归纳提出了利用公式法、小导眼法、曲线指示法、扭矩与dc指数法等方法进行地质导向的成功实践。利用这些方法，可以有效地指导现场钻井人员，将钻井轨迹比较准确地导入目的层中。     

磨削加工中磨削液对砂轮堵塞影响的试验分析

砂轮堵塞是影响砂轮耐用度的重要指标，磨削液在磨削加工中起到润滑、冷却、清洗等作用，对砂轮的堵塞有着较大影响．文章通过试验，分析了磨削液对砂轮堵塞的原因．     

硫脲法从低品位含金硫化矿及其焙砂酸浸渣中回收金

本工作采用硫脲法从钴铜硫化矿及其经硫酸化焙烧,酸浸钴铜后的渣中对低品位金进行了浸取研究.直接浸取硫化矿,金的溶出率低,操作参数如电位、pH值等不稳定,试剂耗量大;而从酸浸渣中浸取金的溶出率高,可达91.0%以上,数据重现性好,试剂消耗大大降低,操作稳定.优化了浸取条件,从而降低了硫脲消耗,耗量是1.78kg/t矿.最后,用还原铁粉和活性炭从硫脲浸取富液中回收金进行了探索,效果良好.试验结果表明,硫脲法具有潜在的工业性应用推广价值.     

Concurrent reading while writing revisited

A modification is proposed to Peterson's construction of 1-writern-reader multivalued atomic shared variableusingn+2 multivalued safe variables and some boolean atomic variables. The resulting construction is elegant and is simpler than the original one. K. Vidyasankar received B.E. (Elec. Engg.) from Thiagarajar College of Engineering, Madurai, M. Tech. from I.I.T. Kanpur, India, and Ph.D. in Computer Science from University of Waterloo, Canada. He is now an Associate Professor in Computer Science at Memorial University of Newfoundland, Canada. His research interests include concurrency control and recovery in database systems, concurrency in interprocess communication, design and analysis of algorithms, and graph theory.A prelininary version of this paper, under the title Improving Peterson's Construction of 1-Writern-Reader Multivalued Atomic Register, appears in the Proc. 26th Annual Allerton Conference on Communication, Control, and Computing, University of Illinois at Urbana Champaign, September 1988, pp 693–700     

Modelling of the mist formation in a segmented grinding wheel system

It has been found that using a segmented grinding wheel with a fluid chamber can significantly minimise the quantity of coolant while improving the ground surface integrity. The present investigation aims to explore the fluid flow mechanism in such a wheel system. To this end, the Weber theory for Newtonian jet instability was applied to quantitatively determine the contribution of coolant flow rate to mist and ligament modes. A semi-analytical model was then developed to predict the mist flow rate by taking into account both the grinding parameters and fluid properties. It was shown that the model prediction was in good agreement with experimental measurements. Because of the comprehensive integration of variables in the formulation, the model provides a good fundamental understanding of the mist formation and offers a practical guideline for the selection and use coolant in minimising the mist flow rate.