Photovoltaic collectors efficiency according to their integration in buildings

A model for building integrated photovoltaic systems has been developed and implemented in a dynamic simulation tool. This tool takes into account the thermal interactions between the PV collector and the building. The influence of the type of integration upon the PV collector efficiency has been evaluated and hybrid PV/air collectors have been studied. An overall efficiency is defined, including the production of electricity and heat. A case study has been performed on two different typical buildings. In the case of a multi-crystalline silicon PV collector integrated on the roof of a single family house located in Paris, the efficiency of unventilated PV modules fixed on the roof is 14%. If the PV collector is used to preheat the ventilation air, the efficiency reaches 20%. A proper building integration also improves the environmental balance of PV technologies over their life cycle.     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Determining the life cycle of bolts using a local approach and the Dang Van criterion

The fatigue behaviour of bolts under axial load has always been considered from the component point of view for which fatigue limit is usually taken equal to 50 MPa, and few results are available to designers for limited lifetimes. Here, we take up this problem from a material point of view using a local approach. For each case of fatigue testing, using finite‐element (FE) model of the bolt, we determine the stabilized local stress at the root of the first thread in contact with the nut. To characterize bolt behaviour with these numerical results, we use Dang Van multiaxial fatigue criterion for which we extend application to the medium fatigue life. These results can be correlated with the experimental numbers of cycles to failure to determine material parameters of the generalized criterion. Using statistical Gauss method, we can make lifetime predictions for any level of risk of failure. In addition, we propose an analytical model to rapidly determine the local stress condition from nominal loading data (mean stress and alternating stress). This model dispenses us from a new modelling if the bolt is stressed in the same manner as the bolts used for behaviour characterization. Using this model and the generalized criterion, it is extremely easy to make lifetime predictions whatever the risk considered.     

气体悬浮焙烧炉内衬烘炉曲线的确定

根据所使用的低水泥浇注料的性能，对中铝山西分公司检修厂4号焙烧炉制定了合理的烘烤曲线，提高了耐火内衬的质量，延长了内衬的使用寿命。     

To Do or to Have? That Is the Question.

Do experiences make people happier than material possessions? In two surveys, respondents from various demographic groups indicated that experiential purchases-those made with the primary intention of acquiring a life experience--made them happier than material purchases. In a follow-up laboratory experiment, participants experienced more positive feelings after pondering an experiential purchase than after pondering a material purchase. In another experiment, participants were more likely to anticipate that experiences would make them happier than material possessions after adopting a temporally distant, versus a temporally proximate, perspective. The discussion focuses on evidence that experiences make people happier because they are more open to positive reinterpretations, are a more meaningful part of one's identity, and contribute more to successful social relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Longitudinal analysis of the relationship between symptoms and quality of life in veterans treated for posttraumatic stress disorder.

This study examined how change in posttraumatic stress disorder (PTSD) symptoms relates to change in quality of life. The sample consisted of 325 male Vietnam veterans with chronic PTSD who participated in a randomized trial of group psychotherapy. Latent growth modeling was used to test for synchronous effects of PTSD symptom change on psychosocial and physical health-related quality of life within the same time period and lagged effects of initial PTSD symptom change on later change in quality of life. PTSD symptoms were associated with reduced quality of life before treatment. There were synchronous effects of symptom change on change in quality of life but no significant lagged effects. Results indicate the importance of measuring quality of life in future investigations of PTSD treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Lifetime and ageing management of nuclear power plants: A brief overview of some light water reactor component ageing degradation problems and ways of mitigation

The susceptibility and tendency for nuclear power plant (NPP) components to undergo changes in their mechanical and physical properties in the course of the NPP lifetime is generally termed as “ageing”. The light water reactor (LWR) nuclear environment is not a begnign one; it is characterized not only by fast neutrons, which can degrade metallic structures, but also relatively high temperatures of coolant water (around 300°C) which may contain impurities (e.g. sulphate, chloride, peroxides) which can cause corrosion. The hydrodynamical conditions of the coolant in steam generators, for example, can cause thermal fatigue, erosion and corrosion; suspended particulate matter can accelerate erosion processes which can lead to wall thinning and lowering of safety margins. Ageing is, therefore, a very complex mixture of factors concerned with materials, temperatures, times of exposure to environments which vary with time and with respect to chemical composition and flow charactertistics.

The paper describes a few ageing phenomena which can be considered important due to their impact on nuclear safety issues; their influence on economic aspects (availability) of NPP is outlined. Mitigation measures for NPP component ageing problems are given together with recommendations for addressing such issues in NPP now and in the future.     

高应力水平下滚动轴承疲劳寿命试验研究

通过在三种不同的强化负荷下进行深沟球轴承疲劳寿命试验，并与常规试验一组结果对比。结果表明，适当地加大滚动轴承疲劳寿命试验负荷，可以大大缩短试验时间，而疲劳寿命依然服从Ｗｅｉｂｕｌ分布，且与常规试验结果基本一致，同时疲劳破坏的形式仍是表面下萌生裂纹，然后扩展至表面形成剥落。     

传感器可靠性技术—传感器可靠性特征量

介绍已知试验数据如何计算可靠性特征量的点估计和区间估计     

Theoretical and experimental evaluation of the limit state of transit gas pipelines having corrosion defects

The limit carrying capacity of gas pipelines having corrosion defects were evaluated by means of an improved FEM analysis, together with the ANSI/ASME defect judgement and an experimental verification. When compared with our past presentation at the proceedings of the CAPE'93 Colloquium (dealing with reproduced defects), this paper evaluates the remaining lifetime of a pipeline having natural faults. The new improved analysis includes geometrical nonlinearities leading to a modification of limit state parameters and thus matching better with actuality. This presented work was initiated by the firm of Trans-Gas in Prague after having had a pipeline inspected proving some parts of it as being heavily corroded. The task in hand was to determine the remaining pipeline lifetime with the view to at least a two-year period.