渣金两相氧化锰还原的不可逆过程热力学研究

将仅能描述近平衡体系发生物理化学变化时物理量间的线性关系式——线性不可逆过程热力学扩展到远离平衡体系,建立了有界面存在的远离平衡的化学反应体系的不可逆过程热力学方程,并将其应用于渣-金间的氧化锰还原反应,得到的氧化锰还原的不可逆过程热力学的动力学方程与实验数据能很好地吻合,这表明不可逆过程热力学可以应用于远离平衡的体系。     

High-temperature oxidation of aluminum electroplated Fe-Mn alloys

Austenitic Mn-Al alloys (20–32 W/O Mn, 7–10 Al, 2–3 Si, 1C) were found to have satisfactory oxidation resistance up to 950°C under isothermal conditions in air. Surface enrichment of aluminum is a necessary condition for obtaining an almost pure alumina scale for uses at higher temperatures. Four different Mn-steels were Al-coated by the Capuano electroplating process. In all the steels there was an increase in the hot-oxidation resistance. The best results were obtained with steels containing both Al and Si, and this for temperatures up to 1100°C. No spalling was noticed during rapid cooling of the test pieces. Silicon was found to act as a diffusion barrier to outward iron diffusion. It appears that there is formation of a pure, thin film of alumina from the matrix which interacts with the aluminum diffusing from the superimposed, coating for the formation of good bonds.     

锰掺杂对PNW-PMS-PZT压电陶瓷结构和性能的影响

采用传统陶瓷工艺制备了Pb(Ni1/2W1/2)O3-Pb(Mn1/3Sb2/3)O3-Pb(Ti，Zr)O3-xMnO2压电陶瓷，分析了经1150℃烧结2h制备的陶瓷样品的相结构组成。实验结果表明：所有陶瓷样品均为钙钛矿相，未发现其它晶相。随着锰掺杂量的增加，陶瓷晶粒逐渐长大。研究了不同剂量的锰掺杂对压电陶瓷介电和压电性能的影响。结果表明：随着锰掺杂量的增加，材料逐渐变“硬”，当MnO2掺杂量少于0．2％(按质量计，下同)时，相对介电常数εr、压电常数d33和机械品质因数Qm逐渐增加，介电损耗tanδ减小；当MnO2掺杂量多于0．2％时，εr、d33和Qm逐渐降低，tanδ增加。随着锰掺杂量的增加，机电耦合系数kp和Curie温度θc逐渐减小。MnO2掺杂量为0．2％的压电陶瓷适合制作大功率压电陶瓷变压器。其压电性能为：εr=2138，tanδ=0．0058，kp=0．613，Qm=1275，d33=380pC／N和θc=205℃。     

A kinetic study on medium temperature desulfurization using a natural manganese ore

Natural manganese ores were selected as raw materials for the desulfurization sorbent because of economical efficiency and high reactivity on hydrogen sulfide. Initial reaction rates between H₂S and desulfurization sorbent of natural manganese ores were determined in a temperature range of 400-800°C using a thermobalance reactor. All reactions were first order with respect to H₂S and were expressed by the Arrhenius relation. When the sulfidation reaction was controlled by diffusion, the temperature dependence of the effective diffusivity was given by the Arrhenius equation. Activation energies and frequency factors were obtained from the product layer diffusion coefficient of various sorbents by plotting as an Arrhenius equation form. Several additives were mixed to improve the sulfidation capacity, and NiO was the best additive.     

Lanthanum-Magnesium and Lanthanum-Manganese Donor-Acceptor-Codoped Semiconducting Barium Titanate

BaTiO₃ powder doped with La donor and codoped with Mn or Mg acceptor was sintered at 1350°C/1 h in air. For Ladoped BaTiO₃, the room-temperature resistivity decreased to a minimum at [La³⁺] ∼ 0.15 mol%. For La-Mn-codoped BaTiO₃, the minimum resistivity occurred at [La³⁺] - 2[Mn²⁺] ∼ 0.15 mol%. When the ceramic was changed to a fine-grained insulator by high donor doping ([La³⁺] >0.15 mol%), its semiconductivity was restored, and the relatively homogeneous, coarse-grained microstructure recurred by codoping with either Mg or Mn acceptor, with the transition at [La³⁺] - 2[Mg²⁺] = 0.15 mol% or [La³⁺] - 2[Mn²⁺] = 0.15 mol%. The analogy of a compensation effect between La-Mn- and La-Mg-codoped BaTiO₃ suggested that Mn acceptor added to BaTiO₃ exists as Mn²⁺ ion in the bulk grain region; its influence on the positive temperature coefficient of resistivity behavior is then discussed.     

微生物脱砷预处理难冶含砷金矿提金的研究

用化能自养的氧化铁硫杆菌和氧化硫硫杆菌，对河北半壁山含砷金精矿进行了公斤级的预处理氧化脱砷实验．在细菌预处理反应器中的连续和批式脱砷实验表明，目前选育的菌种是有效的．严格控制工艺条件，可以在4天左右便脱砷率高于80％．后续氰化提金实验证实，金的总回收率可达90％以上．用微生物脱砷预处理难冶含砷金矿有金浸出率高、便于固定浸出的砷、免除对环境污染的优点，是有很好应用前景的处理难冶含砷金矿的技术路线．     

Synthesis and electrochemical characterization of a new Se-doped spinel material for lithium secondary batteries

A new Se-doped spinel material, LiAl_0.18Se_0.02Mn_1.8O₄ powder with a phase-pure polycrystalline was synthesized by a sol–gel method. The material in the 3 V region (2.4 3.5 V) and both the 3 and 4 V region (2.4 4.4 V) initially deliver a discharge capacity of 81 and 178 mA h g^–1 which increase with cycling to reach 110 and 204 after 50 cycles, respectively. The material shows excellent cycleability in the 4 V region (3.0 4.4 V) with almost no capacity loss. The structural integrity of the Se-doped spinel was characterized by charge–discharge cycling tests and X-;ray diffraction.     

局部颜色特征与工艺参数融合的铜浮选入矿类型识别

针对铜浮选过程中矿源变化频繁而造成的浮选工况难以识别、生产过程不稳定等问题,在分析铜浮选流程特点的基础上,提出了一种局部颜色特征与关键工艺参数融合的铜浮选入矿类型识别方法.首先采用多元图像处理方法提取泡沫图像局部颜色特征,然后采用混合滤波、时间配准算法将其与关键工艺参数进行数据融合,最后用融合后的混合特征进行模糊聚类,得到隶属度矩阵和聚类中心.工业数据仿真结果验证了本文所提方法的有效性.     

原水微量金属锰含量的测定

提出应用甲醛肟分光光度法测定原水中微量金属锰含量的方法,并对可能的干扰进行了讨论,对方法的精密度和准确度进行实验。此方法准确,简便,适用于公司竹浆生产选择含氧漂白工艺生产控制分析。     

用闪锌矿(方铅矿)精矿催化还原软锰矿(大洋锰结核矿)制取硫酸锰

在稀硫酸(或稀盐酸)溶液中，用闪锌矿(或方铅矿)精矿作还原剂，用可溶性铁盐作催化剂，分解软锰矿(或大洋锰结核矿)，同时制取锰盐和锌盐。该工艺具有反应快速、彻底，工艺流程简单等特点，同时省去了软锰矿的还原焙烧和锌(铅)精矿的氧化焙烧，能够大幅度提高锰、锌(铅)矿的浸出率，对原料矿的品级没有严格要求。