Multidisciplinary optimization of gas-quenching process

Distortion as a result of the quenching process is predominantly due to the thermal gradient and phase transformations within the component. Compared with traditional liquid quenching, the thermal boundary conditions during gas quenching are relatively simple to control. By adjusting the gas-quenching furnace pressure, the flow speed, or the spray nozzle configuration, the heat-transfer coefficients can be designed in terms of both the component geometry and the quenching time. The purpose of this research is to apply the optimization methodology to design the gas-quenching process. The design objective is to minimize the distortion caused by quenching. Constraints on the average surface hardness, and its distribution and residual stress are imposed. The heat-transfer coefficients are used as design variables. DEFORM-HT is used to predict material response during quenching. The response surface method is used to obtain the analytical models of the objective function and constraints in terms of the design variables. Once the response surfaces of the objective and constraints are obtained, they are used to search for the optimum heat-transfer coefficients. This process is then used instead of the finite-element analysis. A one-gear blank case study is used to demonstrate the optimization scheme.     

高温精炼处理对铸造镍基高温合金组织与性能的影响

研究了高温精炼处理对铸造镍基高温合金组织与性能的影响.普通铸造镍基合金枝晶组织粗大,晶界碳化物呈链状分布,晶内碳化物呈草体汉字状密集分布于枝晶间,是合金塑性低的主要原因.经高温精炼处理后,合金的枝晶组织细化,晶界及枝晶间的碳化物数量减少,γ γ共晶相数量增加,晶界碳化物呈不连续质点状分布,晶内碳化物的密集程度下降,拉伸塑性和蠕变(持久)寿命得以明显提高.经1 650℃,5 min高温熔体处理后,合金室温延伸率由3.5%提高到9.2%,700℃高温塑性由2.0%提高到8.0%,900℃高温塑性由2.8%提高到9.6%,蠕变寿命由34 h提高到52 h,蠕变塑性由4.3%提高到6.11%.推荐的最佳高温精炼处理制度为1 650℃保温4 h.分析了高温精炼处理对合金液态结构、凝固组织与性能的影响机理.     

划痕法测Ni—P合金镀层结合力的研究

本文用划痕法测定了Ni-P合金镀层的结合力;观察了划痕侧面镀层的失效形式;分析了三种评定结合力的参数。结果指出,临界载荷L_C、平均应力σ_A用于评定Ni-P镀层的结合力是有条件的,而B-W公式存在的问题更多。     

纯铜动态再结晶的Monte Carlo法模拟

本文建立了一种基于能量判据的确定动态再结晶各个阶段临界应变的方法，并基于此种方法Monte Carlo(MC)法进行了纯铜动态再结晶的二维模拟，定量计算了变形引起的存储能与变形之间的关系，计算出了发生动态再结晶的临界应变。模拟结果表明，采用MC法可以揭示动态再结晶的形核生长过程与应变历史之间的关系。结合本文所建立的基于能量判据的确定动态再结晶各个阶段临界应变的方法，可以预测开始发生动态再结晶的临界变形条件。     

Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods

A study was undertaken in an attempt to quantitatively describe the rolling process of eutectoid steel rods. Finite element method was employed to model plastic flow and heat transfer in the deformed material, and heat transfer during cooling to ambient temperature. The numerical calculation gave an assessment of the strain, strain rate and temperature distributions in the work piece. This allowed the prediction of the austenite microstructure evolution during the process. Finally, the relationships describing the microstructure-mechanical properties were used to quantitatively characterize the influence of processing parameters on strength of rods after rolling.     

电子束焊接工艺参数与温度场的关系

采用有限元方法,定量分析了电子束焊接工艺参数与铍环内表面温度的关系。结果表明,加热深度或电子束斑点半径增加,内表面温度增加,焊接速度增加,内表面温度降低。     

基于弹塑性有限单元法的齿轮轴数值模拟

基于弹塑性有限单元法的一般原理,建立了齿轮轴热处理的热力耦合分析模型,对12Cr齿轮轴热处理工艺中温度、应力以及相变的分布情况进行了模拟,研究了加热规范的成形性,并与实际结果比较证实本模型的有效性,为有限单元法在热处理工艺模拟中的应用奠定了一定基础。     

热分析法在铸造生产中的应用

着重介绍了热分析法在测墨铸铁球化级别、铸铁力学性能预测以及铝硅合金变质处理效果检测等方面的应用情况,指出了目前存在的问题及其发展趋势。     

渗碳材料涡流测试系统的研究

以通用有限元分析软件ANSYS作为二次开发平台，开发了面向渗碳材料的涡流测试系统。该系统将有限元前处理、涡流电磁场计算、渗碳层深度逆问题求解及计算结果的可视化处理结合起来，提供了良好的用户界面。     

大型风电球墨铸铁件的生产实践

以轮毂为例,介绍对大型风力发电机球墨铸铁件生产工艺进行的试验研究。通过优化铸型工艺,采用适当的浇注系统和低温石墨化退火工艺,选择合理的化学成分,控制球化处理与孕育处理,可生产出各项性能指标合格的风电铸件。