Moderate antioxidative efficiencies of flavonoids during peroxidation of methyl linoleate in homogeneous and micellar solutions

The relative reactivities as well as the stoichiometric coefficients for a number of flavonoids, catechols, and—for comparison—standard phenolic antioxidants were determined by analyzing the kinetics of oxygen consumption in organic and micellar systems, with peroxidation initiated by lipid- and water-soluble azo initiators. The results demonstrated that the flavonoids did not behave as classic phenolic antioxidants such as α-tocopherol, but showed only moderate chain-breaking activities. The results were in line with other structure-activity relationship studies on the importance of the B-ring catechol structure, the 2,3-double bond, and the 3,5-hydroxy groups. The data are discussed in view of possible explanations of the deviations flavonoids reveal in their behavior compared with regular phenolic antioxidants.     

新型蓝绿发光材料ZnSe／BeTe超晶格的能带剪裁

由于器件的快速退化，101.5小时似乎成了Znse基蓝绿色半导体激光器难于逾越的寿命极限。分析退化机制，发现在强电流注入的半导体激光器中，热退化具有重要影响。研究表明，用作载流子限制层的宽带Ⅱ-Ⅵ族四元合金（如ZnMgSSe）只能对ZnSe中的电子有效地限制，无法对空穴很好地限制;而对BeTe，却只能对空穴进行有效的限制，无法对电子很好地限制。这导致ZnSe（或BeTe）活性层空穴（或电子）漏电发热，引起退化。本文提出以ZnSe／BeTe超晶格为蓝绿发光层，并用包络函数理论具体计算了阱宽、垒宽对载流子能级的不同影响，考察了ZnSe、BeTe厚度比和超晶格周期对带隙、载流子限制能力的调节。为研制新型长寿命蓝绿色半导体激光器提供了一条新的途径。     

直读光度法测定钼铁中的硅

试样经草酸、双氧水分解后，以盐酸羟胺破坏掉多余双氧水。以标准样品作参比，在硫酸－柠檬酸介质中，用钼酸铵显色，抗坏血酸还原，生成稳定的硅钼蓝。此方法可测定１．０％以下的硅，具有快速、准确、灵敏度高等优点。     

低浓度CO合成甲酸甲酯中试研究

进行了低浓度CO合成甲酸甲酯的中试研究,探讨了温度、压力、流速、催化剂浓度等因素对反应的影响,在优化条件下考察了系统的稳定性。结果表明,低浓度CO(体积分数15%)合成甲酸甲酯CO的单程转化率达到50%以上,粗品中甲酸甲酯含量达到7%～9%,可以满足工业浓缩要求,且整个合成系统未发生母液堵塞的问题,与高浓度CO羰基合成甲酸甲酯相比,单位生产成本可降低30%,具有良好的技术先进性。     

醋酸甲酯在Cs_(1.5)PW/SiO_2催化剂上的水解反应

通过改变阳离子的种类与配比,制备了一系列SiO2负载的磷钨酸盐催化剂,考察了制备方法对催化剂性能的影响,采用傅里叶变换红外光谱、X射线衍射、X射线荧光光谱、环境扫描电子显微镜等方法对催化剂进行了表征,并考察了该系列催化剂对醋酸甲酯水解反应的活性。实验结果表明,Cs1.5PW/SiO2催化剂的活性最好,当Cs1.5PW负载量(质量分数)为30%时,Cs1.5PW的Keggin结构保持完好,没有硅钨酸阴离子形成,Cs1.5PW在SiO2载体上高度分散;在反应温度55℃、反应时间2h的条件下,醋酸甲酯的转化率为35.79%,约为均相磷钨酸催化剂的1.3倍。该催化剂重复使用4次后,醋酸甲酯的转化率稳定在25%;80℃下反应2h,与NKC-9磺酸树脂催化剂相比,醋酸甲酯的转化率提高了5.17%。     

Calorimetric determination of the enthalpy change for the binding of methyl orange to poly(vinylpyrrolidone) in aqueous solution

Thermodynamic parameters have been determined for the interaction of methyl orange and poly(vinylpyrrolidone) in aqueous solutions containing tris, tris and hydrochloric acid, or water only. Enthalpy changes were determined by use of a flow microcalorimeter. Free energy changes were calculated from the results of equilbrium dialysis studies. The results are interpreted in terms of the behaviour of poly(vinylpyrrolidone) in these systems. Analysis of data shows that the hydrophobic interactions in the systems are in the order: tris > wateronly > tris-HC1.     

DSC and DMTA characterization of ternary blends

The phase behavior of ternary blends made of poly(epichlorohydrin) (PECH), poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) has been investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). DMTA measurements have been shown to be more sensitive than DSC for the detection of a second phase, for the determination of the composition of each phase, and the distribution of PECH in each of them. About 70% PECH was required to obtain a single narrow T_g in the ternary system, which suggests a single homogeneous phase in the limit of sensitivity of DMTA. This study also emphasizes the importance of the composition of the immiscible polymer pair (i.e. the PVAc/PMMA pair in the PECH/PVAc/PMMA system), in addition to the thermodynamic interaction parameters, for controling the phase behavior of ternary systems.     

Hot-drawing of poly(methyl methacrylate) and simulation using a glass-rubber constitutive model

The large-deformation three-dimensional glass-rubber constitutive model for isotropic, amorphous, linear polymers near the glass transition, previously proposed, has been extended to include a spectrum of network relaxations. In addition, an experimental programme of uniaxial tension and compression tests was carried out on high molecular weight cast sheets of poly(methyl methacrylate) (PMMA), with varying strain-rate and temperature across the range from 114 to 190 °C, encompassing the thermoforming range of practical importance. The extended model was found to fit successfully the data for PMMA, provided a doublet network relaxation spectrum was employed. The original model, with only a single network relaxation, was found to be grossly inadequate when there was significant network relaxation by entanglement slippage. Parameters of the model for PMMA, obtained by fitting to the new data, were compared with values obtained by other routes.     

Preparation of fatty acid methyl esters for gas-chromatographic analysis of lipids in biological materials

Theoretically, preparation of fatty acid methyl esters (FAMEs) deals with reversible chemical reactions in a complex system. Methodologically, there are numerous ways, generally characterized by the type of catalysts used and steps involved. Although there are more than a half dozen common catalysts, the majority fall into either acidic (HCl, H₂SO₄ and BF₃) or alkaline types (NaOCH₃, KOH and NaOH), with each having its own catalytic capability and application limitations. In terms of steps, many conventional methods, including those officially recognized, consist of drying, digestion, extraction, purification, alkaline hydrolysis, transmethylation/methylation and postreaction work-up. Although these methods are capable of providing reliable estimates if some precautions are taken, they are cumbersome, time-consuming and cost-inefficient. A new approach has been to transmethylate lipidsin situ. Due to its simplicity, high sensitivity, comparable reliability and capability to determine total fatty acids, the method of direct transmethylation is finding a unique place in lipid determination. Regardless of which method is used, quantitative methylation requires chemists to take precautions at every step involved, particularly during FAME formation and subsequent recovery steps. Evidently, there is an urgent need for more systematic studies, guided by the chemical principle of reactions involved and physicochemical properties of regents and end products, into factors affecting these steps. Hopefully, this will lead to an improved method, which measures lipid composition in biological materials not only with high accuracy but also with high efficiency and minimum costs.     

Cover Picture: Toward Large‐Scale Alignment of Electrohydrodynamic Patterning of Thin Polymer Films (Adv. Funct. Mater. 15/2006)

By integrating lithography and self‐assembly via electrohydrodynamic instabilities, Russel and co‐workers are able to guide initially flat polymer films to evolve into periodic arrays of pillars over regions much greater in extent than their natural domain sizes, as detailed on p. 1992. Novel structures that involve a combination of linear ridges and pillars are also produced, mainly as as result of the dynamic merging among preformed pillars. To pattern thin polymer films via electrohydrodynamic instabilities, we design and utilize two different kinds of mask patterns to guide pillars into alignment over regions much greater in extent than their natural domain sizes. First, narrow protruding ridges that intersect to form regular patterns on the mask trigger the growth of pillars beneath. Later, square and triangular packings of pillars develop in the regions enclosed by those ridges, preserving the registry from one domain to the next over a much larger area than within individual domains in unpatterned portions of the mask. Second, small square protrusions that are prealigned into a large regular array on the mask guide the formation of square packings of pillars in domains that conform to the mask, forming a large array of pillars. Novel structures involving a combination of linear ridges and pillars are also produced mainly due to the dynamic merging among preformed pillars. Finally, we find vertex symmetry of the mask pattern is necessary for generating and preserving ordered patterns on the polymer film.