Synthesis and characterisation of N-toluyl methacrylatoethyl carbamates,homopolymers and copolymers with methyl methacrylate

The paper describes the synthesis of N-2/4-toluyl methacrylatoethyl carbamates using 2/4-toluyl isocyanate and 2-hydroxyethyl methacrylate. Homopolymerisation and copolymerisation of these novel monomers with methyl methacrylate was carried out using benzoyl peroxide as an initiator and tetrahydrofuran as solvent. Photopolymerisation of N-4-toluyl methacrylatoethyl carbamate could be carried out without the use of photosensitiser. Structural characterisation of copolymers was done using ¹H-NMR. Thermal stability of copolymers was evaluated in a nitrogen atmosphere by dynamic thermogravimetry.     

Cationic ring-opening polymerization of hexamethylcyclodisilazane: General aspects and tentative mechanisms

The ring-opening polymerization of hexamethylcyclodisilazane (D_2NMe), initiated by methyl triflate in 1,2-dichloroethane, forms in the first, fast kinetic step both linear polymer and cyclic dimer (D_4NMe). Subsequently a slow depolymerization process occurs leading to exclusively cyclotrisilazane (D_3NMe). On the basis of kinetic measurements carried out using an adiabatic calorimetric technique and complementary experiments, mechanisms of both propagation, cyclization and back-biting reactions are proposed. The influence of the reaction temperature was also studied; it is demonstrated that, at low temperature, polymerization does not lead to cyclic oligomer formation. In such conditions, the polymerization presents a ‘living’ character.     

A reactive molecular dynamics model of thermal decomposition in polymers: I. Poly(methyl methacrylate)

The theory and implementation of reactive molecular dynamics (RMD) are presented. The capabilities of RMD and its potential use as a tool for investigating the mechanisms of thermal transformations in materials are demonstrated by presenting results from simulations of the thermal degradation of poly(methyl methacrylate) (PMMA). While it is known that depolymerization must be the major decomposition channel for PMMA, there are unanswered questions about the nature of the initiation reaction and the relative reactivities of the tertiary and primary radicals formed in the degradation process. The results of our RMD simulations, performed directly in the condensed phase, are consistent with available experimental information. They also provide new insights into the mechanism of the thermally induced conversion of this polymer into its constituent monomers.     

纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

Effect of temperature on methyl radical generation over Sr/La2O3 catalysts

The role of gas phase CH₃ radicals in the oxidative coupling of CH₄ over 1 wt% Sr/La₂O₃ is supported by the observations that (i) this is a very effective catalyst for the generation of CH₃ · radicals and (ii) the concentration of CH₃ · radicals increases with temperature over the range of 450 °C–800 °C.     

模块化蓝光光存储性能静态测试系统

蓝光光存储是信息存储领域发展的一个重要方向。测试系统是研究蓝光光存储材料的必备条件，为建立蓝光光存储研究平台，设计和搭建了一套模块化蓝光光存储性能静态测试系统。激光工作波长为406．7nm。系统采用调制解调技术降低系统噪声，提高测量粘度：采用光点移动模式降低对样品尺寸的要求；采用纳米平台提高记录点的反复定位性能。实验结果证明测试系统性能良好，可以满足蓝光光存储性能静态测试要求。     

油脂脱臭馏出物富集VE的预处理研究概述

对脱臭馏出物的性状、组成及开发前景进行了介绍,重点对脱臭馏出物的甲酯化预处理特别是酶法预处理进行了阐述,最后列举了VE提取的实例。