基于整体特征的快速英文字母识别方法

文章提出了一种基于整体特征的小写英文字母识别方法.首先根据字母图像的赋值背景提取其整体特征,然后构建7个模板进行模板匹配.该方法不需要对图像作复杂的细化处理、轮廓提取等,减少了可能带来的误识和拒识,也不需要现有神经网络方法的长期训练,因而简单快速.同时,不同字体的字母图像其整体特性基本相同,因此识别率较高.     

BP网络模型对人脸朝向的识别

研究BP神经网络模型,通过计算机模拟人脑建立神经元网络,使用一部分人脸朝向信息作为训练的实例集,训练稳健后,可以推广应用判断其他人脸的朝向信息,以实现计算机自动识别人脸朝向。先对图片进行归一化等预处理,再应用主成分分析提取特征信息,每幅提取出的特征信息都是8个数据的列向量,构建一个8个输入、17个隐含、3个输出的三层BP网络模型。将训练实例集的特征向量代入训练,调整参数后保证其性能和收敛速度。最后通过大量实验验证,计算机识别的误判率仅为6.7%,模型可靠。     

基于车型识别的BP算法Matlab实现

车型识别具有广阔的应用前景,BP神经网络在车型识别中能够提高车型的识别率。在任何车型大致都可以抽象成一个"工"字型情况下,提取其中的顶长比、前后比和顶高比这三项相对参数作为BP神经网络的输入参数。采用三层3-8-3的BP神经网络,并用14对输入参数离线训练,再用4对新数据进行检验,均得到了预想的期望值。     

基于SOM的模糊聚类在Web日志挖掘中的应用

将自组织映射神经网络（SOM）与FCM结合,利用SOM的并行计算能够减少模糊C均值算法在处理海量数据时的聚类时间,可以提高聚类算法的速度和效果,同时使用该算法对校园网Web日志进行数据挖掘,能够对用户行为进行分析,从而提出相应的方法,更好地提高服务效率和管理质量。     

卷积融合文本和异质信息网络的学术论文推荐算法

针对交互数据稀疏和推荐多样性问题,基于卷积协同过滤推荐框架提出卷积融合文本和异质信息网络的学术论文推荐算法（WN-APR）。首先学习不同语义下用户和论文的多样化特征,缓解数据稀疏问题;然后基于外积设计不同语义特征相互增强的方式融合它们,并使用三维卷积神经网络代替二维卷积神经网络充分挖掘不同特征对性能的影响;最后改进贝叶斯个性化排序损失函数增强推荐多样性。在CiteuLike-a、CiteuLike-t数据集上的实验结果表明,相比于基线模型,WN-APR在准确率和多样性的四个指标上都有所提升。     

LPNet: A DNN based latency prediction technique for application mapping in Network-on-Chip design

Analytical models used for latency estimation of Network-on-Chip (NoC) are not producing reliable accuracy. This makes these analytical models difficult to use in optimization of design space exploration. In this paper, we propose a learning based model using deep neural network (DNN) for latency predictions. Input features for DNN model are collected from analytical model as well as from Booksim simulator. Then this DNN model has been adopted in mapping optimization loop for predicting the best mapping of given application and NoC parameters combination. Our simulations show that using the proposed DNN model, prediction error is less than 12% for both synthetic and application specific traffic. More than 108 times speedup could be achieved using DPSO with DNN model compared to DPSO using Booksim simulator.     

Automatic Channel Detection Using DNN on 2D Seismic Data

Geologists interpret seismic data to understand subsurface properties and subsequently to locate underground hydrocarbon resources. Channels are among the most important geological features interpreters analyze to locate petroleum reservoirs. However, manual channel picking is both time consuming and tedious. Moreover, similar to any other process dependent on human intervention, manual channel picking is error prone and inconsistent. To address these issues, automatic channel detection is both necessary and important for efficient and accurate seismic interpretation. Modern systems make use of real-time image processing techniques for different tasks. Automatic channel detection is a combination of different mathematical methods in digital image processing that can identify streaks within the images called channels that are important to the oil companies. In this paper, we propose an innovative automatic channel detection algorithm based on machine learning techniques. The new algorithm can identify channels in seismic data/images fully automatically and tremendously increases the efficiency and accuracy of the interpretation process. The algorithm uses deep neural network to train the classifier with both the channel and non-channel patches. We provide a field data example to demonstrate the performance of the new algorithm. The training phase gave a maximum accuracy of 84.6% for the classifier and it performed even better in the testing phase, giving a maximum accuracy of 90%.     

Speech Enhancement via Residual Dense Generative Adversarial Network

Generative adversarial networks (GANs) are paid more attention to dealing with the end-to-end speech enhancement in recent years. Various GAN-based enhancement methods are presented to improve the quality of reconstructed speech. However, the performance of these GAN-based methods is worse than those of masking-based methods. To tackle this problem, we propose speech enhancement method with a residual dense generative adversarial network (RDGAN) contributing to map the log-power spectrum (LPS) of degraded speech to the clean one. In detail, a residual dense block (RDB) architecture is designed to better estimate the LPS of clean speech, which can extract rich local features of LPS through densely connected convolution layers. Meanwhile, sequential RDB connections are incorporated on various scales of LPS. It significantly increases the feature learning flexibility and robustness in the time-frequency domain. Simulations show that the proposed method achieves attractive speech enhancement performance in various acoustic environments. Specifically, in the untrained acoustic test with limited priors, e.g., unmatched signal-to-noise ratio (SNR) and unmatched noise category, RDGAN can still outperform the existing GAN-based methods and masking-based method in the measures of PESQ and other evaluation indexes. It indicates that our method is more generalized in untrained conditions.     

Intelligent tool wear monitoring based on parallel residual and stacked bidirectional long short-term memory network

Effective tool wear monitoring (TWM) is essential for accurately assessing the degree of tool wear and for timely preventive maintenance. Existing data-driven monitoring methods mainly rely on complex feature engineering, which reduces the monitoring efficiency. This paper proposes a novel TWM model based on a parallel residual and stacked bidirectional long short-term memory (PRes–SBiLSTM) network. First, a parallel residual network (PResNet) is used to extract the multi-scale local features of sensor signals adaptively. Subsequently, a stacked bidirectional long short-term memory (SBiLSTM) network is used to obtain the time-series features related to the tool wear characteristics. Finally, the predicted tool wear value is outputted through a fully connected network. A smoothing correction method is applied to improve the prediction accuracy. The proposed model is experimentally verified to have a high prediction accuracy without sacrificing its generalization ability. A TWM system framework based on the PRes–SBiLSTM network is proposed, which has a certain reference value for TWM in actual industrial environments.     

A novel vision-based method for 3D profile extraction of wire harness in robotized assembly process

Automating stages for deformable objects in the production line, in which assembling a wire harness into a predefined position is a complex task owing to the specialized characteristics of the objects. Besides a few automatized systems proposed in the other studies to implement this task under simplified setup conditions, a significant portion of this process remains to be completed manually in industrial environments. To construct an automatic wire harness assembly system, the development of a method that can automatically detect the wire harness profile in a 3D environment and, consequently, guide robot arms to implement assembly tasks is indispensable. Therefore, this study presents an approach that satisfies this requirement, which not only proposes a deep learning-based system to detect the wire profile, but also improves the accuracy of the detected results through a correction method according to the depth values of contiguous areas. The verification of the approach in a robot system that highlights its usefulness and practicality demonstrates the potential of the proposed method to replace people and consequently, reduce labour costs in factory environments.