液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

Effects of storage time and chemical preservatives on the total volatile basic nitrogen content in chilean mackerel (Trachurus murphy) prior to fish meal production

Total volatile basic nitrogen (TVB-N) as a measure of protein degradation and total microbial counts or stored raw mackerel (Trachurus murphy), which had been treated with chemical preservatives, were compared with the TVB-N and microbial counts of untreated fish. In unpreserved fish, decomposition of fish protein was rapid. Treatment of mackerel with acetic (1000-5000 μg kg^?1), which was the most effective of the parameters studied, approximately halved the rate of increase in TVB-N compared with the untreated samples. Changes in the total microbial counts presented a similar trend.     

A New Variable Diffusion Drying Model for the Second Falling Rate Period of Paddy Dried in a Rapid Bin Dryer

The objectives of this article is to propose a new drying model for the second falling rate period known as the variable diffusion controlled period that follows after the first falling rate period and to propose a new method to determine the second critical moisture content that separates these two periods. Experimental work on paddy drying at minimum fluidization velocity was carried out in a rapid bin dryer. The effects of operating temperatures (60-120°C) and bed depths (2-6 cm) on the paddy drying characteristics were investigated. It was found that the normalized drying rate of paddy was proportional to the normalized moisture content in the first falling rate period but in the second falling rate period, the normalized drying rate of the material varies exponentially with the normalized moisture content. The different relationship between the normalized drying rate and the normalized moisture content in the first and second falling rate periods indicate that two different mechanism of moisture transport are at work. The new exponential model of the second falling rate period and the linear model of the first falling rate period were found to fit the experimental data very well. Derivation from variable diffusion equation shows that the linear model is the result of constant diffusion coefficient whereas the new exponential model is the result of linear diffusion coefficient. This also implies that the first falling rate period is a constant diffusion controlled period and the second falling rate period is a variable diffusion controlled period. In addition, drying kinetics data of a drying process that fits the exponential model over a very slow drying period will show that the drying process is under the effect of a linear diffusion coefficient. It was also found that the proposed new method to determine the second critical moisture content that distinguishes between the first and second falling rate periods by using a sudden change in the value of the drying rate gradient to a much lower value at that point is more rigorous and yet simpler than the method of determining the specific location of the receding drying boundary since it is based on the behavior of the actual drying kinetic data.     

Formation of low-resistivity poly-Si and SiNx films by Cat-CVD for ULSI application

In this paper, bulk-Si metal–oxide–semiconductor field effect transistors (MOSFETs) are fabricated using the catalytic chemical vapor deposition (Cat-CVD) method as an alternative technology to the conventional high-temperature thermal chemical vapor deposition. Particularly, formation of low-resistivity phosphorus (P)-doped poly-Si films is attempted by using Cat-CVD-deposited amorphous silicon (a-Si) films and successive rapid thermal annealing (RTA) of them. Even after RTA processes, neither peeling nor bubbling are observed, since hydrogen contents in Cat-CVD a-Si films can be as low as 1.1%. Both the crystallization and low resistivity of 0.004 Ω·cm are realized by RTA at 1000 °C for only 5 s. It is also revealed that Cat-CVD SiN_x films prepared at 250 °C show excellent oxidation resistance, when the thickness of films is larger than approximately 10 nm for wet O₂ oxidation at 1100 °C. It is found that the thickness required to stop oxygen penetration is equivalent to that for thermal CVD SiN_x prepared at 750 °C. Finally, complementary MOSFETs (CMOSs) of single-crystalline Si were fabricated by using Cat-CVD poly-Si for gate electrodes and SiN_x films for masks of local oxidation of silicon (LOCOS). At 3.3 V operation, less than 1.0 pA μm⁻¹ of OFF leakage current and ON/OFF ratio of 10⁷–10⁸ are realized, i.e. the devices can operate similarly to conventional thermal CVD process.     

深基坑施工安全的监测与实例

从明确深基坑施工安全监测的关键出发，确定了监测内容和相关极限报警值，用工程实例进行了阐述。     

The Content Driven Mobile Internet

The development of future mobile networks will be driven, in large part, by content and web based services. In this paper, we examine several performance, scalability and architectural challenges faced by future mobile web applications and how advanced mobile content delivery techniques can address these challenges. We review existing content delivery using a taxonomy that consists of three categories: network scaling, end system acceleration, and content and protocol optimization. While wireline content delivery focuses on network and server scalability, mobile content delivery will likely benefit most from optimizing radio link usage. We also present our ongoing work in this area, which extends the functionality of edge caching to the terminal, uses user interest correlation information to maintain low terminal power consumption and adds a new dimension to radio resource management. This revised version was published online in August 2006 with corrections to the Cover Date.     

新型内循环石油焦燃烧器烧焦管内颗粒流动特性

针对石油焦及其气化余焦的燃烧和流化特性,自建了冷态实验装置。以石英砂颗粒作为固体物料,常温空气为流化介质,在烧焦管内表观气速为3.07~6.63 m/s,颗粒循环强度为24.7~154.2 kg/(m2.s)的条件下,采用DDY型差压变送器和脉冲磷光颗粒示踪法分别测量了烧焦管内的床层轴向平均固含率分布和颗粒停留时间分布规律。结果表明,当表观气速为3.96 m/s时,随着颗粒循环强度的提高,烧焦管相同高度处平均固含率分布增大;当颗粒循环强度为106.5 kg/(m2.s)时,随着烧焦管内表观气速的提高,烧焦管整个高度上的平均固含率分布减小。烧焦管内颗粒的扩散由弥散颗粒扩散和颗粒团扩散组成。建立了烧焦管内床层轴向平均固含率关联式及颗粒的轴向扩散模型,模型的计算值与实验值能较好地吻合。     

输气管道投产置换过程气体混合规律研究

目前国内输气管道置换工艺主要依据人工经验进行，存在较大的盲目性，导致天然气管道投产成本较高，安全风险较大，有必要对输气管线安全投产工艺进行科学、系统的研究，实现输气管道的安全、高效、经济投产模式。文章讨论了现有置换工艺中不同的置换方式，认为不加隔离器的置换方法具有置换效率高、费用低以及安全可靠等优点，是一种有前途的新工艺、新方法。同时，为确保置换过程的安全性，针对置换过程中注氮量确定的盲目性问题，采用模拟试验方法，研究了天然气与氮气、氮气与空气混合段在不同流速和背压下长度的变化规律，从而为确定合理的用氮量提供了理论依据。     

OCT-M 汽油选择加氢工艺工业应用

介绍了OCT-M汽油选择性加氢技术在汽油加氢装置的应用情况。对影响加氢汽油质量的主要因素进行了分析，提出了降低加氢过程汽油辛烷值损失、降低大分子硫醇生成的优化措施，并针对存在的问题提出了相应的改进建议。     

The Effect of Moisture Content on the Conversion of Ergosterol to Vitamin D in Shiitake Mushrooms

The distribution of ergosterol in different parts of shiitake mushrooms was studied in order to optimize the conversion of ergosterol to vitamin D₂ during drying. The effect of moisture on the conversion of ergosterol to vitamin D₂ was also investigated by adjusting the moisture content of fresh mushrooms to different levels in a large vacuum desiccator and subjecting them to UV irradiation at 290-320 nm wavelength, for 2 h. The moisture, ergosterol and vitamin D₂ contents were determined using standard procedures. It was found that the ergosterol content on a dry matter basis of fresh shiitake mushroom was highest in the gills (10.6 ± 0.99 mg/g DM), followed by the cap or pileus (5.34 ± 0.64 mg/g DM) and was least in the stalk or stipe (2.97 ± 0.56). The moisture content had a marked influence on the conversion of ergosterol to vitamin D₂, the best conversion taking place at a moisture content of about 70% on a wet basis.