碳酸二苯酯技术发展现状及展望

综述了碳酸二苯酯多种合成技术的发展现状，重点介绍了碳酸二甲酯与苯酚酯交换法和氧化羰基化法技术，并对碳酸二苯酯技术在国内的发展进行了展望。     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

脲醛树脂胶粘剂~(13)C核磁共振分析

采用常规化学分析和13C核磁共振相结合的方法,分析研究了脲醛树脂胶粘剂性能与结构的关系。结果表明:在摩尔配比F:U=1.2:1时,粘度越高,游离尿素的含量越低,羟甲基的含量越低,游离甲醛含量降低; 树脂产品的粘度低,聚合度也低,羟甲基的含量偏高,粘接性能下降,同时游离甲醛含量上升,而适量苯酚的添加可改善树脂结构,是一种优化树脂的途径。当增大摩尔配比到F:U=1.4:1时,尿素含量下降,游离甲醛含量上升。因此,摩尔配比的选择在很大程度上影响脲醛树脂的性能。     

不同Li/Nb摩尔比In∶Fe∶LiNbO_3晶体的生长及其光学性能

在Li NbO3(LN)中掺摩尔分数为1%的In和掺质量分数为0.03%的Fe,用提拉法技术生长具有不同n(Li)/n(Nb)[n(Li)/n(Nb)=0.94,1.05,1.20,1.38]的In∶Fe∶LN晶体。测试不同n(Li)/n(Nb)的In∶Fe∶LN晶体的吸收光谱、抗光致散射能力和指数增益系数,并计算晶体的有效载流子浓度。结果表明晶体样品随着n(Li)/n(Nb)增加,吸收光谱的吸收边发生紫移,抗光致散射能力增加,指数增益系数和有效载流子浓度增大。采用n(Li)/n(Nb)=1.38的In∶Fe∶LN晶体作记录介质,n(Li)/n(Nb)=1.05的In∶Fe∶LN晶体作位相共轭镜进行全息关联存储实验。实验表明存储系统具有实时处理,成像质量好,信噪比高和能反复使用等优点。     

TREOR多晶X射线衍射图指标化程序的适用性

多晶Ｘ射线衍射图指标化的ＴＲＥＯＲ程序已被普遍采用，特别是在硅酸盐矿物等材料的晶体结构研究工作中应用很多。然而，实际上它存在着一定的缺陷，有可能得出错误的结果。本文对这一程序作了详细的检验，发现即使在理想条件下它都不适用于低对称晶系的指标化。在对程序作改进以后，该程序可适用于高对称晶系多晶衍射的指标化     

TiO_2－Al_2O_3复合载体在石油化工催化剂中的应用

介绍了ＴｉＯ_２－Ａｌ_２Ｏ_３复合载体的制备方法及其物化性能。以此载体研制出的ＢＹ型裂解汽油加氢催化剂各项性能指标均符合标准值的要求；并在工业使用中取得了较好的效果。     

Pulse study of methane partial oxidation to syngas over SiO2-supported nickel catalysts

Methane was pulsed over pure CuO and NiO as well as Cu/La₂O₃ and Ni/La₂O₃ catalysts at 600° C. Results indicate that the mechanisms for methane activation over copper and nickel are quite different. Over CuO, methane is converted to CO₂ and H₂O, most likely via the combustion mechanism; whereas metallic copper does not activate methane. Over NiO in the presence of metallic nickel sites, methane activation follows the pyrolysis mechanism to give CO, CO₂, H₂ and H₂O. Similar results were obtained over the Cu/La₂O₃ and Ni/La₂O₃ catalysts. XRD investigations indicate that copper and nickel existed as CuLa₂O₄ and LaNiO₃ respectively in the La₂O₃-supported catalysts. The effect of La₂O₃ on the activation of methane is discussed.     

Dynamic behaviour of viologen-activated nanostructured TiO2: correlation between kinetics of charging and coloration

The dynamic response of viologen-activated nanostructured titanium dioxide has been studied by means of electrical and electro-optical measurements. We show that the state of charge of the semiconductor network is the key factor mediating between the electrode potential and colouration of viologen. Theoretically, we relate the electrode potential to the statistics of occupancy of both TiO₂ nanoparticles and oxidized viologen molecules attached to the surface, on the assumption of quasi-equilibrium of Fermi levels in these contacting phases. Experimentally, we determine the statistical function from steady-state measurements (electrochemical impedance spectroscopy) of the capacitance of the semiconductor film. From this understanding we explain the main features that correlate the simultaneous voltammetry and transmittance responses. Finally, the redox process of viologen is resolved separately from the TiO₂ response by means of transmittance data.     

多孔介质内部热质传递的等效耦合扩散模型的推导及其应用

基于Whitaker的体积平均方程，在不附加任何新的假设的基础上，对多孔介质内部热质传递的等效耦合扩散模型进行推导，得出了多孔介质内部热质传递的等效耦合扩散模型。并应用该模型对瓷质砖体干燥过程进行了数值模拟，模拟结果与实验结果十分吻合。     

THERMODYNAMIC PERFORMANCE PREDICTION FOR NON-CFC MIXTURES

The ideal thermodynamic performances of a variety of non-CFC refrigerants and their mixtures were calculated by using the Patel-Teja equation of state. The results indicated that the preferable non-CFC refrigerant mixtures could be HCFC-I24 +HFC-152a, HFC-152a + HFC-134, dimethyl ether + HCFC-22, and dimethyl ether + HCFC-124 for air-conditioning systems, and binary mixtures of HCFC-22 + HFC-125, and HCFC-22 + HFC-143a for low-temperature applications. Those potential non-CFC mixtures were suggested for further investigations.