叔丁基过氧化物在柴油中的应用

将叔丁基过氧化物对催化柴油十六烷值的改进效果进行了试验，结果表明，在叔丁基过氧化物添加量为0．1％（质量分数）时，可以提高催化柴油的十六烷值5－8个单位；这些叔丁基过氧化物提高十六烷值的福度与催化柴油的自身组成有很大关系。评价结果表明，柴油中芳烃含量较高，烷烃含量较低，叔丁基过氧化物的效果则较好；在柴油燃烧过程中，叔丁基过氧化物促进芳烃的氧化过程比促进烷烃的氧化过程更强一些。     

Physical properties of oleochemical carbonates

Carbonates are a class of compounds that have recently found increasing interest in commercial applications owing to their physical properties and relatively straightforward synthesis. In this work, physical and fuel properties of five straight-chain C_17–39 and three branched C_17–33 oleochemical carbonates were investigated. These properties included cetane number (CN), low-temperature properties, (kinematic) viscosity, lubricity, and surface tension. The carbonates studied had CN ranging from 47 to 107 depending on carbon chain length and branching. For the same number of carbons, the CN of carbonates were lower than those of FA alkyl esters owing to interruption of the CH₂ chain by the carbonate moiety. Kinematic viscosities at 40°C ranged from 4.9 to 22.6 mm²/s whereas m.p. ranged from +3 to below −50°C depending on the carbonate structure. High-frequency reciprocating rig testing showed the neat carbonates to have acceptable lubricity that improved as chain length increased. Finally, the carbonate's ability to influence cold-flow properties in biodiesel (methyl soyate) and lubricity in low-lubricity ultra-low sulfur diesel were examined. The carbonates studied did not significantly affect cold flow or lubricity properties at concentrations up to 10,000 ppm (1 wt%). The properties of the carbonates resemble those of fatty alkyl esters with similar trends resulting from compound structure.     

PRAND: GPU accelerated parallel random number generation library: Using most reliable algorithms and applying parallelism of modern GPUs and CPUs

The library PRAND for pseudorandom number generation for modern CPUs and GPUs is presented. It contains both single-threaded and multi-threaded realizations of a number of modern and most reliable generators recently proposed and studied in Barash (2011), Matsumoto and Tishimura (1998), L’Ecuyer (1999,1999), Barash and Shchur (2006) and the efficient SIMD realizations proposed in Barash and Shchur (2011). One of the useful features for using PRAND in parallel simulations is the ability to initialize up to 10¹⁹${10}^{19}$ independent streams. Using massive parallelism of modern GPUs and SIMD parallelism of modern CPUs substantially improves performance of the generators.     

A demerit-fuzzy rating system,monitoring scheme and classification for manufacturing processes

For monitoring online manufacturing processes, the proportion of weights imposed on each type of product’s defects (nonconformities or demerits) has a profoundly effective impact on control charts’ performance. Apparently, the demerit-chart approach is superior than the widely-used c-chart scheme, because it allows us to place relative precise weights (real numbers) on defects according to their distinctly inferior degrees affecting the product quality so that the abnormal variations of processes can be literally exposed. However, in many applications, the seriousness of defects is evaluated partially or entirely by the inspectors’ perceptive judgement or knowledge, so with the precise-weight assignment, the demerit rating mechanism is considered to be somewhat constrained and subjective which inevitably leads to the targeted manufacturing process with limited and possibly biased information for online surveillance. To cope with the drawback, a demerit-fuzzy rating system and monitoring scheme is proposed in this paper. We first incorporate fuzzy weights (fuzzy numbers) to properly reflect the severity measures of defects which are categorized linguistically. Then, based on properties of fuzzy set theory and proposed approaches for fuzzy-number ranking, we develop the demerit-fuzzy charting scheme which is capable of discriminating process conditions into multi-intermittent statuses between in-control and out-of-control. This approach improves the traditional process control techniques with the binary-classification restraint for the process conditions. Finally, the proposed demerit-fuzzy rating system, monitoring scheme, and classification is elucidated by an application in garment industry to monitor textile-stitching nonconformities conditions.     

聚氯乙烯中杂质粒子的产生原因及解决措施

通过分析聚氯乙烯树脂中杂质粒子产生的主要原因，提出了在采购、保管、生产、清理、分析等环节的解决措施。     

OCT-M技术生产清洁汽油的工业应用

石家庄炼油化工股份有限公司60万t/a OCT-M FCC汽油选择性加氢脱硫装置2005年3月首次开工,开工初期硫醇偏高,辛烷值损失较多.根据抚顺石油化工研究院的建议,优化了OCT-M装置的催化剂装填方案和操作工艺条件.2005年11月,在装置累计运转6个月之后,对OCT-M装置进行了满负荷标定,标定结果表明硫含量由606～676 μg/g降低到114～180 μg/g,RON损失0.4～0.6个单位.2006年11月,在装置累计运转17个月之后,对OCT-M装置又进行了一次标定,标定结果表明MIP汽油硫含量由417～442 μg/g降低到24～53 μg/g,RON损失0.7～1.8个单位,标定结果表明OCT-M技术可为我国炼厂生产硫含量≯150 μg/g)和硫含量≯50 μg/g的清洁汽油提供经济、灵活的技术方案.     

液-液水力旋流器中的液滴破碎

在总结前人研究成果的基础上,分析了液-液水力旋流嚣中液滴破碎产生的原因,指出流场的湍流特性是产生液滴破碎的主要原因。对水力旋流器中的湍流度、雷诺切应力及颗粒的湍动能进行了分析,给出了水力旋流器中液滴破碎可能性较大的几个部位,并对旋流器边壁液滴破碎的可能性进行了讨论。分析了水力旋流器中液滴破碎的机理,阐明了液滴破碎判据——临界Weber数的表达式,并对理想球形液滴的破碎进行了分析。     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.