High Temperature Oxidation of Steels in Air and CO2–O2 Atmosphere

Three kinds of hot rolled steel slabs, viz. high strength steel, bake hardened steel and low carbon steel, were oxidized isothermally between 1100 and 1250 °C for up to 2 hr in 1 atm of air and an 85%N₂–10%CO₂–5%O₂ gas mixture. The steels were oxidized in a similar fashion in both the atmospheres. The oxidation process followed an initial linear rate law, which then gradually transformed to a nearly parabolic rate law. Thick, porous and nonadherent scales formed rapidly, due to the high oxidation temperature. The scales formed consisted of Fe₂O₃,(Fe₂O₃+Fe₃O₄), (Fe₃O₄+Fe₂O₃ +FeO) and (FeO+Fe₃O₄) from the outer surface. The presence of supersaturated oxygen beneath the scale resulted in grain boundary oxidation and the formation of internal oxide precipitates.     

High-temperature oxidation of pure titanium in CO2 and Ar-10%CO2 atmospheres

The oxidation behavior of pure titanium has been investigated in the temperature range of 1000 K to 1300 K in CO₂ or Ar-10%CO₂. Optical microscopy, electron probe microanalyses, and X-ray measurements on the oxide scales formed during oxidation indicate that their structures are nearly independent of temperature and the corrosion atmosphere. The scales consisted of two layers, an external one and an internal one, having a rutile (TiO₂) structure. The parabolic rate law was confirmed for growth of the external scale and the permeation depth of oxygen in titanium with apparent activation energies of 266 and 226 kJ/mol, respectively. The rate-determining diffusion species in the oxidation processes are discussed.     

A high-temperature oxidation-resistant Fe-Mn-Al-Si alloy

To develop satisfactory alloys without Cr or Ni for high-temperature application up to 1100C, three alloys based on Fe-10%Al-Si with differing fourth (or fifth) element additions were oxidized in air at 1100°Cfor 24 hr. A low carbon, Fe-30Mn-10Al-Si alloy exhibited excellent high-temperature oxidation resistance. The total weight gain for 24 hr oxidation in air at 1100°C was only 1.03 mg/cm ². After air oxidation for 6 days at 1100°C, no nodule formation or breakthrough oxidation occurred. Post-oxidation SEM and EDAX examination showed that a thin, compact, protective alumina scale formed on the alloy.Visiting Scientist (People's Republic of China).     

Microstructural Investigation of Protective and Non-Protective Oxides on 11% Chromium Steel

FIB, SEM and STEM/EDX were used to investigate X20 stainless-steel samples exposed to dry O₂, or O₂ containing 40% H₂O, with a flow velocity of 0.5 cm/s or 5 cm/s, for 168 hr or 336 hr at 600°C. Thin protective Cr-rich (Cr,Fe)₂O₃ was maintained on the samples exposed to dry O₂, even after 336 hr, and on the sample exposed to O₂/H₂O mixture with the low-flow velocity (0.5 cm/s) for 168 hr. The oxide scale formed in the latter environment contained less Cr, due to Cr loss through CrO₂(OH)₂ evaporation. Breakaway oxidation occurred on the samples exposed in high-gas-flow velocity for shorter time (168 hr) or in low-gas-flow velocity (0.5 cm/s) for longer time (336 hr). The breakaway scales featured a two-layered structure: an outward-growing oxide “island” consisting of almost pure hematite (α-Fe₂O₃), and an inward-growing oxide “crater” consisting of (Cr,Fe)₃O₄. The transition from a thin protective (Cr,Fe)₂O₃ scale to a non-protective thick scale on this martensitic/ferritic steel originated locally and was followed by rapid oxide growth, resulting in a thick scale that covered the whole sample surface.     

对堆芯熔化条件下锆合金包壳腐蚀动力学有关问题的讨论

针对在堆芯熔化条件下建立铝合金包壳腐蚀动力学模型时所涉及的有关问题和已有的模型进行了讨论和评述。     

微量Ge对大气下液态Sn抗氧化性能的影响

采用观察液态Sn表面氧化行为和刮取表面氧化渣的方法,研究了微量元素Ge对液态Sn在大气和250℃条件下表面抗氧化性能的影响,并与纯Sn的氧化行为进行对比;利用X射线光电子能谱仪(XPS)、扫描电子显微镜(SEM)研究了合金表面元素的含量、价态,及合金氧化后的表面形貌.结果表明:当微量元素Ge浓度达到0.01%时(质量分数),大气下液态Sn表面具有很好的抗氧化性能,同时微量元素在液态Sn表面高度富集.XPS分析表明:表面富集的Ge以4价氧化物形式存在.静态液面氧化时,Ge在液态Sn中迅速偏析,并形成一种保护性的致密氧化膜,是提高液态Sn抗氧化性能的原因.     

Effect of grain size on high-temperature oxidation behavior of Cu-80Ni alloy

1　INTRODUCTIONTheoxidationofunalloyedcopperandnickelhasalreadybeenstudiedindetail.Whilethehigh tem peratureoxidationofCu Nialloys ,alsostudiedanumberoftimestodate[13] ,isanexampleofarela tivelysimpleclassofscalingofbinaryalloysbyasin gleoxidant,becausethemetalsformacontinuousse riesofsolidsolutions ,whiletheiroxides ,CuO ,Cu2 OandNiO ,exhibitsmallmutualsolubilitiesandshowsignificantdifferencesinthethermodynamicstabilityandparabolicgrowthrates .Thus ,copper richalloysformexternalscales…     

High-temperature oxidation of SiC in a glow-discharge oxygen plasma

The oxidation kinetics and structure of the oxide scales formed on high-density SiC were studied in molecular oxygen at 740 Torr and in a glow-discharge oxygen plasma at 0.1 Torr at temperatures of 1000, 1100, and 1200°C. The monatomic oxygen formed by the glow discharge markedly increased the reaction rate and the vaporization of some of the oxidation products. The marked differences in kinetics suggest that the rate-controlling step during oxidation in molecular oxygen is the dissociation of adsorbed diatomic oxygen to the monatomic species. Films formed in molecular oxygen were mostly amorphous SiO₂ with small inclusions of SiC and graphite, whereas films formed in dissociated oxygen were primarily amorphous SiO₂ containing SiO, S₂O₃, and the coesite form of SiO₂.     

Numerical modeling of high-temperature corrosion processes

Numerical modeling of the diffusional transport associated with high-temperature corrosion processes is reviewed. These corrosion processes include external scale formation and internal subscale formation during oxidation, coating degradation by oxidation and substrate interdiffusion, carburization, sulfidation and nitridation. The studies that are reviewed cover such complexities as concentration-dependent diffusivities, cross-term effects in ternary alloys, and internal precipitation where several compounds of the same element may form (e.g., carbides of Cr) or several compounds exist simultaneously (e.g., carbides containing varying amounts of Ni, Cr, Fe or Mo). In addition, the studies involve a variety of boundary conditions that vary with time and temperature. Finite-difference (F-D) techniques have been applied almost exclusively to model either the solute or corrodant transport in each of these studies. Hence, the paper first reviews the use of F-D techniques to develop solutions to the diffusion equations with various boundary conditions appropriate to high-temperature corrosion processes. The bulk of the paper then reviews various F-D modeling studies of diffusional transport associated with high-temperature corrosion.     

Influence of Reinforcement Content and Matrix Composition on the Oxidation Resistance of Aluminum-Matrix Composites (A3xx.x/SiCp)

A study was made on the influence of the SiCp proportion and the matrix concentration of four composites (A360/SiC/10p, A360/SiC/20p, A380/SiC/10p, A380/SiC/20p) on their oxidation behavior. Gravimetric tests were used in a kinetics study of the corrosion process at different temperatures (350, 400, 450, and 500°C). The influence of corrosion on mechanical properties was evaluated by hardness measurements. The nature of corrosion products and the influence of the microstructure on the morphology and growth of the oxidation layer were analyzed by SEM and low-angle XRD. The extent of the damage due to oxidation for Al/SiCp composites increases with the SiCp concentration due to the increase of nucleation sites. One of these nucleation sites is in the interface region between the matrix and the particles. Oxidation was influenced more by the percentage of alloy elements in the matrix than by the proportion of SiCp reinforcement. The presence of Cu and Ni in the matrix favors the oxidation process through the formation of different intermetallic compounds.