Improvement of coercivity and thermal stability of Nd-Fe-B sintered magnets by intergranular addition of Tb80Fe20 alloy

To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications, the eutectic Tb₈₀Fe₂₀ (wt%) alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity (H_cj) and thermal stability. The microstructure, magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb₈₀Fe₂₀ contents were studied. The experimental results demonstrate that the coercivity (H_cj) of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe, and the remanence (B_r) decreases not obviously by introducing 4 wt% Tb₈₀Fe₂₀ alloy. Meanwhile, the reversible temperature coefficients of coercivity (β) and remanence (α) of the Nd-Fe-B magnets are increased from ?0.5634%/℃ to ?0.4506%/℃ and ?0.1276%/℃ to ?0.1199%/℃ at 20–170 ℃, respectively. The Curie temperature (T_C) of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb₈₀Fe₂₀ content. Moreover, the irreversible flux magnetic loss (h_irr) is obviously reduced as Tb₈₀Fe₂₀ addition increases. Further analysis of the microstructure reveals that a modified microstructure, i.e. clear and continuous RE-rich grain boundary layer, is acquired in the sintered magnets by introducing Tb₈₀Fe₂₀ alloy. The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.     

萃取预分离法分离富铕中钇矿新工艺

采用一种新的串级萃取方式--萃取预分离法分离富铕中钇矿的新工艺.原料首先流入十几的三出口预先粗分离工艺,其萃余液La～Gd(TbDy)直接流入Nd/Sm工艺;中间出口流入(Gd)Tb～HoY(Er)Gd～Dy/Ho～LuY细分离工艺;出口负载有机相(Ho)Er～LuY流入Gd～Dy/Ho～LuY的洗涤段.结果表明,新工艺的粗分离工艺将占原料约70%的La～Gd(TbDy)预分离掉,使流入Gd～Dy/Ho～LuY工艺的稀土量减少约70%;由于Gd～Dy/Ho～LuY分组的萃余液GdTbDy含Ho2O3小于0.03%,省去原工艺的GdTbDy/HoY分离;新工艺的处理能力提高30%,酸碱消耗减少20%以上,贵重稀土元素Eu和Tb的存槽量大大减少.     

Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

磁性材料产业现状与展望

介绍磁性材料的主要品种，如永磁体、软磁体和磁记录介质材料的行业现状及技术进步。     

Modularized design for cooperative control and plug-and-play operation of networked heterogeneous systems

In this paper, a cooperative control analysis and design method is investigated for heterogeneous dynamical systems that may be of arbitrary relative degree or nonminimum-phase or both. To achieve consensus or cooperative stability, a negative value of input-feedforward passivity index is used to accommodate and analyze such systems, and the magnitude of the index value is also used as the impact coefficient to quantify the impacts of heterogeneous dynamics of these systems on their networked operations. Physical-system-level designs are explicitly carried out to make individual linear and nonlinear systems (which are either feedback linearizable or nonminimum phase of certain form) become passivity-short and to embed one pure integrator into their input–output dynamics. The network-level distributed control can simply be chosen without any knowledge of the heterogeneous dynamics but with only information of an upper bound on their impact coefficients. It is shown, using the impact equivalence principle, that these controls separately designed but implemented together always ensure either local or global consensus and that a global non-trivial consensus emerges if and only if the information network has at least one globally reachable node or is varying but cumulatively connected. The proposed methodology of fully modularized designs unravels complexity of analyzing and designing cyber–physical systems and enables their plug-and-play into networked operations.     

D301树脂分离衣康酸的工艺研究

采用弱碱性阴离子交换树脂Ｄ３０１对发酵法生产的衣康酸进行了分离研究。通过静态交换实验，研究了Ｄ３０１树脂对衣康酸的静态交换动力学，确定了传质机制和影响因素；通过动态交换实验，研究了以硫酸为洗脱剂，以氨水为再生剂的工艺过程，确定了主要工艺参数。     

基于受扰动的PMSM系统动力学研究及模拟

借助Lyapunov函数稳定性理论和最优化理论研究了永磁同步电动机系统解的界,得到了它的界估计。通过计算机模拟,数值模拟验证了计算理论的可行性。     

SEPARATION AND ENRICHMENT OF WEAK ORGANIC ACIDS OR BASES BY IMMOBILIZED LIQUID MEMBRANES

A new and effective liquid membrane process to achieve both separation and enrichment simultaneously of weak organic acids or bases was developed. The process utilizes effectively the difference in the apparent partition coefficient of the constituent species between the aqueous and organic phases, and uses the change of the apparent partition coefficients with the hydrogen ion concentration of the aqueous phase. For such a fundamental model apparatus as a diaphragm diffusion cell being operated batch wise, the effects of pK value of solutes, permeability of solutes through the membrane, volume ratio of liquids in two aqueous phases, and pH value of aqueous phase on enrichment factor and selectivity for the solute to be concentrated were discussed analytically. Separation and enrichment were demonstrated using aqueous mixed solutions of fumaric acid and L-malic acid. The results were in good agreement with the theoretical predictions.     

COMPUTER-AIDED GRAPHICS OF LIQUID-LIQUID EXTRACTION

An algorithm has been developed and tested for steady-state liquid-liquid extraction, using rectangular coordinates. It is capable of handling common types of stagewise contact, i.e., single stage extraction, multistage cross-current, and continuous countercurrent multistage extraction. The results depend on the nature of the extraction scheme and the extent of separation desired. While equilibrium data for some systems are stored in its data bank, the present portable computer simulator ( LIQEXT) has the flexibility of reading equilibrium data for other systems, as well as overriding stored data

Both design and rating cases can be performed. In the design mode, i.e., given the feed and solvent rates and the outlet concentration, it calculates the number of stages, the exit stream flow rates, and the concentration profile. In the rating ( or simulation) mode, i.e., given the feed and solvent rates, and the number of stages, it computes the exit streams flow rates and compositions, and the concentration profile. In both cases a graphical output of the concentration profile is produced, either on the screen or on a hard-copy plotter.