稀土元素Ce对纯铜导电性及力学性能的影响

在纯铜中加入稀土元素Ce,研究不同含量Ce及不同保温时间对纯铜的导电性、抗拉强度、硬度、耐磨性等的影响.研究发现在纯铜中加入Ce起到净化、去杂质的作用,改善纯铜的导电性;也可使晶粒细化,改善纯铜的抗拉强度及其它力学性能.且熔炼时加入稀土后的保温时间要适当.在试验的条件下保温时间以30 min为宜,稀土Ce的最佳加入量w为0.02%.     

Co-colouration Effects in the Systems of Metal(Ⅱ)-Rare Earth(Ⅲ)-Xanthene Dye and Their Influences on Photometric Determination of Metal Ions

After comparing the influences of each rare earth(Ⅲ),11 species of metal(Ⅱ)and 8 species of acidictriphenylmethane dye on the formation of coloured coordination compound in the system of Metal(Ⅱ)-RE(Ⅲ)-Dye,it was proven that the co-colouration effect can be caused only by the xanthene dyes(XD)con-taining substituting hydroxy.group on the ortho-position of etheric oxygen group.Besides,the radius of met-al(Ⅱ)must not be smaller than a definite limit;otherwise,no co-colouration appears.Furthermore,the acid-ity of medium is another important factor to affect co-colouration,Bromopyrogallol red causesco-colouration of Pb(Ⅱ)-RE(Ⅲ)only,owing to its higher chromophoric acidity;while alizarin violet causesco-colouration of M(Ⅱ)-RE(Ⅲ)(M=Pb,Ca,Sr and Ba),due to its lower chromophoric acidity.The condi-tions causing co-colouration,the regularities of co-colouration and the influences of co-colouration inphotometric determination of metals were discussed.     

稀土氧化物对中高碳钢堆焊金属中夹杂物的变质作用

采用电镜和金相等手段，对加稀土氧化物和不加稀土氧化物的堆焊金属中的夹杂物进行了研究，结果表明，稀土氧化物能细化堆焊金属中的夹杂物，减少了尺寸大的夹杂物数量，使其尺寸分布在8μm以下，同时，稀土氧化物能够改善夹杂物的形状，减少了形状系数大的长条状夹杂物数量，使形状系数接近为1的夹杂物较多。稀土氧化物还能变质堆焊金属中夹杂物的属性，可以形成铝、硅、镧的氧化物夹杂和铝、硅、镧的硫氧化物夹杂，并且减少了有害的硫化锰和铝、锰、钛复合夹杂物在堆焊金属中的存在。     

采用稀土贮氢材料的镍氢电池

介绍了镍-金属氢化物电池的特性和该类电池所用的稀土贮氢材料及其成份配制、制备工艺、合金添加剂对LaNi_5基合金电极综合性能的影响,以及该类电池的应用开发前景。     

稀土在渗硼及硼的复合渗中的作用

本文综述了近十几年来稀土在渗硼及硼的复合渗中的作用以及稀土对渗层组织性能的研究概况，并对其作用机理作了初步探讨。     

Study on the machinability of resulfurized composite free-cutting steels

The machinability of S, S-Ca, S-RE, and S-RE-Ca system resulfurized composite free-cutting steels were investigated, where RE is rare earths, mostly cerium. The experimental results showed that in the low cutting speed range (≤35 m/min), the S-RE system free-cutting steel had better machinability than the others and that the S-RE-Ca system free-cutting steel exhibited the best machinability at high cutting speeds. A protective layer capable of preventing diffusion wear was formed on the rake face of a P30 tool when S-RE-Ca system free-cutting steel was machined in the cutting speed range of 120 to 160 m/min.     

添加稀土引致的磷化膜变化与促进机制

用能谱与SEM分析，发现加入稀土硝酸盐(REN)后明显提高了无定形晶体Zn2Fe(PO4)2在磷化膜表面的覆盖率，而使得膜的耐蚀性能提高.此时膜内相关元素含量比例发生了变化：P增大,Zn减小，可见磷对膜耐蚀性的贡献比锌大.讨论认为，稀土硝酸盐是一个有良好载氧能力的催化剂，具有良好的成核促进作用和阴极去极化作用，从而能加速磷化并使膜的耐腐蚀性能提高.      

Stability of AB5-type hydrogen storage alloys

In this paper, we deduced an empirical equation for predicting the stabilities of the hydrides of AB₅-type compounds with the consideration of the effects of geometrical factor and electric factor. The theoretical curves derived from this equation are in good agreement with the test results of La_1−xCa_xNi₅, Ml_1−xCa_xNi₅ and La_1−xCe_xNi₅ compounds. With this model, we can easily interpret the phenomenon that the initial partial substitution of R by Ca in R_1−xCa_xNi₅ (R is rare earth metal) compounds cause an increase of hydrogen desorption pressure to a maximum value, whereas in the range of larger Ca content x the hydrogen desorption pressure decreases with increasing x.     

萃取预分离法分离富铕中钇矿新工艺

采用一种新的串级萃取方式--萃取预分离法分离富铕中钇矿的新工艺.原料首先流入十几的三出口预先粗分离工艺,其萃余液La～Gd(TbDy)直接流入Nd/Sm工艺;中间出口流入(Gd)Tb～HoY(Er)Gd～Dy/Ho～LuY细分离工艺;出口负载有机相(Ho)Er～LuY流入Gd～Dy/Ho～LuY的洗涤段.结果表明,新工艺的粗分离工艺将占原料约70%的La～Gd(TbDy)预分离掉,使流入Gd～Dy/Ho～LuY工艺的稀土量减少约70%;由于Gd～Dy/Ho～LuY分组的萃余液GdTbDy含Ho2O3小于0.03%,省去原工艺的GdTbDy/HoY分离;新工艺的处理能力提高30%,酸碱消耗减少20%以上,贵重稀土元素Eu和Tb的存槽量大大减少.     

铝合金变质处理的现状和发展趋势

本文主要叙述了铝合金变质处理的方法及特点,并对铝合金变质方法的发展趋势作了展望.