3G中的QoS结构及无线资源分配策略

在3G（第3代移动通信系统）中，为了给不同类型的业务提供不同级别的端到端QoS，网络资源必须进行合理分配。QoS和资源分配是密不可分的，而无线资源分配显得尤为重要。文中提出了UMTS的QoS结构，分3部分对空中接口部分的QoS（即无线资源分配策略问题）进行了讨论：首先提出了一种RRA算法，接着讨论了W－CDMA和TD－CDMA系统的无线资源分配问题，最后讨论了下行链路及上行链路的呼叫允许控制（CAC）。     

台式毛细管放电X光激光装置调试实验

对自行研制的台式毛细管放电X光激光装置进行了系统调试,在充氩气毛细管负载下,输出电流38kA,电流脉冲前沿40ns,并对有关问题进行了讨论.并在这个装置上开展充氩气毛细管放电荧光光谱实验研究.     

数字放大器—3G无线基站的助推器

为了构筑第三代无线网络,人们需要对现有基础设施进行彻底改造,包括网络的发射基站。配置在无线基站中的新型数字控制功率放大器能够改善频谱利用率和功率效率,从而提高系统容量。PMC-Sierra公司的数字控制功率放大器采用了数字校正信号处理器(DCSP)以及自适应控制处理器和补偿估值器(ACPCE),该放大器可改善无线基础设施的可靠性,同时降低系统成本、规模及复杂性。     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.     

Head-to-head polymers: 33. Bromination of cis-1,4-polybutadiene to head-to-head poly(vinyl bromide)

Cis-1,4-polybutadiene (PB) in a 0.5% solution of a solvent mixture of dichloromethane and 1,2-dibromoethane or tetrahydrofuran was quantitatively brominated with elemental bromine at 0°C under careful exclusion of oxygen to head-to-head poly(vinyl bromide). Partially brominated PB has a structure of random or block sequences of butadiene units in the polymer depending on the bromination solvent but shows no stereospecificity in the CHBrCHBr-dyads. Partially brominated PB with block structure showed a microphase-separated morphology over a wide range of composition. Microphase separation is less pronounced for the more random structure of butadiene units. I.r and ¹³C n.m.r. spectroscopy of the partially brominated PB was used to follow the progress of the bromination.     

Melting and crystallization behaviour of elastoplastic semicrystalline copolymers: poly(ether ester)

The melting and crystallization behaviour of an elastoplastic semi-crystalline poly(etherester) has been studied by differential scanning calorimetry. The shape of the melting endotherm is strongly dependent on heating rate and annealing time and results from the sum of simultaneous melting and crystallization phenomena. Samples prepared by different techniques, i.e. by solvent evaporation or by melt extrusion, behave very differently owing to specific crystal morphologies. By applying the Hoffman-Weeks plot, the equilibrium melting temperature has been extrapolated. The Avrami treatment allows the calculation of the index n and of the rate constant K from the isothermal kinetic data.     

串扰耦合的低频分析有效性及阻抗特性研究

从传输线模型出发，分析了二平行直导线间串扰的低频模型有效性，得出允许3dB误差的条件下，低频模型在工程计算串扰中的电学短线和频率足够小的具体限值；同时分析了端接阻抗大小对串扰耦合的影响。对电磁兼容性中的串扰耦合的工程应用有实际指导和参考意义。     

改进的用于半导体器件综合系统的遗传算法

本文对应用于器件综合系统的遗传算法GENOCOP进行了改进.将实数设计空间根据参数的工艺精度影响转换为整型空间,并加入适应性复合算子利用已经得到的点来扩展和开发准可行空间.使其保持有效搜索到可行解的特性的同时,在同等的算法设置下,提高了对可行空间的覆盖率(约2.87倍),可以帮助设计人员更有效的设计可工作的器件.     

HAT循环构成热电冷三联产总能系统的可行性分析

对国内外在提高能源利用率方面的研究现状和发展趋势进行了综述，在前人研究的基础上提出以湿空气透平湿空气透平（HAT）循环构成热、电、冷三联产总能系统的能量利用形式，详细分析了构成该系统的相关技术、可行性及需要加以解决的几个问题。     

垂直腔激光器中弛豫振荡频率的优化控制

从垂直腔面发射的半导体激光器（VCSELs）的结构出发，利用增益与载流子密度的广义对数关系，借助小信号分析法，推出了直接调制情形下驰豫振荡频率的严格解析关系。分析指出，量子阱器件的光子寿命并非越短越好，欲提高VCSELs的驰豫振荡频率，除了增加注入电流，提高微分增益等基本途径外，控制器件的结构参数可使驰豫振荡频率达到极大值。同时，自发辐射因子的可控性，以及降低稳态载流子密度，也都是提高VCSELs驰豫振荡频率和拓宽调制带宽的有效措施。