特钢长型材轧制技术新进展

在可持续发展原则指导下，强化控轧控冷、高精度轧制和改进表面与外形质量是当前特钢轧制技术发展的重点。     

Integration of batching and scheduling for hot rolling production in the steel industry

This paper investigates the hot rolling production scheduling problem in the steel industry and proposes a new mixed integer programming model for this problem based on the monolithic modeling strategy that integrates batching and scheduling. Using this strategy, the new model can simultaneously schedule multiple turns and simultaneously determine the production timetable of these turns in a global optimal view. A long-term tabu search heuristic using frequency-based memory is developed to obtain near-optimal solutions for this problem. Three kinds of speed-up strategies are developed to accelerate the search procedure of the proposed tabu search. A practical scheduling system combining the proposed mathematical model and the tabu search heuristic has been developed and tested on instances collected from practical production data. The experimental results show that the proposed mathematical model and the tabu search heuristic outperform both the current manual scheduling method and the traditional serial method.     

初轧机主传动系统扭转自激振动的稳定性

用变量摄动法对初轧机主传动系统扭转自激振动的稳定性进行了初步研究，讨论了稳定性条件，为初轧机打滑状态的诊断、监测提供了参考依据。     

四坐标数控加工原理及算法研究

本文对四坐标数控加工原理和算法作了详细介绍，尤其对四坐标加工的刀轴矢量算法进行了研究，提出了用垂直于回转轴的平面与刀具运动方向和前导角形成的圆锥面求交，生成刀轴矢量的方法，该方法具有立意新颖、思路清晰，性能可靠，易于在微机上实现等特点，对复杂曲面零件的加工编程，具有重要的实用价值。     

石方控制爆破的飞石控制

该文分析了石方控制爆破中的飞石产生的原因，提出了控制飞石的方法，对石方控制爆破的飞石控制有一定参考价值。     

溶质原子在再结晶运动晶界上偏聚的研究

Ｂ~（１０）（ｎ，α）Ｌｉ~７裂变反应的径迹显微照相技术被用来研究含硼Ｆｅ－３０％Ｎｉ合金高温热变形再结晶过程中硼在晶界上的偏聚行为，实验表明，含硼Ｆｅ－３０％Ｎｉ合金１０００℃热变形２０％再结晶过程中，运动晶界前方发生硼偏聚而后方发生贫硼现象，而在静止晶界上看不到硼偏聚，随着再结晶新晶粒的长大，运动晶界上的硼偏聚变弱。本文提出，可以用晶界对溶质原子热运动散射的量子理论来解释溶质原子在运动晶界上的偏聚现象。     

Recrystallization in Model Ice Cream Solutions as Affected by Stabilizer Concentration

Ice recrystallization rates in simple aqueous solutions comprising fructose and a hydrocolloid stabilizer were measured. The stabilizers were an enzyme-modified guar and a non-gelling high methoxy pectin. The stabilizer concentration dependence of the recrystallization rates for both materials was similar in that increasing the concentration resulted in decreasing rates until a point is reached where further addition had no additional effect. That recrystallization rates were reduced by both gelling and non-gelling stabilizers was strongly suggestive that gelation was not a requirement for recrystallization inhibition and another more specific mechanism applies, for example a weak interfacial effect such as adsorption or blocking. This behavior was also seen with locust bean gum and guar and provided further empirical evidence to support the hypothesis that stabilizers adsorb to ice crystal surfaces.     

S—135钢板热轧工艺研究

S—135钢板是水电站用高强耐磨不锈钢板,既要求强度高、韧性好,又要求耐磨、耐蚀性强,生产难度较大。除我厂外,目前国内尚无其它厂家能够生产这种钢板。该钢板在加热轧制,冷却过程中要解决很多技术难点。我们通过采用特殊的控制轧制和控制冷却工艺,很好地解决了诸多技术难点,使S—135钢板的开发研制取得了成功。为电站用高强度耐磨不锈钢生产提供了宝贵的经验,也为控制轧制及控制冷却技术在中板生产行业的应用起到了积极的推动作用。     

周宁水电站碾压混凝土大坝施工

周宁大坝RCC自2003年4月7日开浇,至2004年4月28日结束,共浇筑161500m3,总体质量良好,施工中充分地借鉴了棉花滩等工程大坝施工技术成果,在斜层碾压工艺上有一定特色。本工程RCC的主要施工技术可供参考。质量检测成果满足设计要求。