YZ-84润滑减阻剂在金刚石钻探、绳索取心中的应用

YZ-84润滑减阻剂是以腐植酸盐为y型原料,用造纸废液为Z型原料,以及其他原料制成。它具有润滑、减阻性能好,清洗能力强,性能稳定,可复配使用,不结垢、不粘管,使用方便,成本低等特点,完全能满足新型小口径金刚石钻机高速钻进、绳索取心的技术要求。     

SFT中的因素作用路径与作用历史

为了描述SFT中系统或元件在不同工作环境状态下经历变化的特征,提出了因素作用路径和作用历史的概念。作用路径描述系统或元件在不同工作状态变化过程中所经历状态的集合。作用历史描述经历作用路径过程中的可积累状态量。给出使用作用路径和作用历史分析问题的步骤。列举一例子,计算在设定条件下的元件维护成本。计算作用路径分别为AB和ACB两种,作用历史中使元件故障概率等于20%的维护成本,该维护成本是通过调整使用时间t和使用温度c产生的。最后给出以实例为背景的作用历史计算方法的不足、面临的问题和可能的解决方法。     

液烃干燥器改造分析

通过对现有液烃干燥器排液,泄压操作运行状态研究分析,提出可行改造方案,优化液烃干燥器排放,泄压操作,达到液烃干燥器长周期运行,丙烯产品水含量合格,降低生产运行成本,节省能耗。     

降耗节能单相永磁同步电动机的研制

针对单相永磁同步电动机起动困难和运行时功率因数低的问题,计算和分析了起动过程中电磁转矩、转差率与起动电容之间的关系,获得使得起动转矩值最大的电容值,以缩短起动时间;通过调节补偿电容来调控电机功率因数,从而降低运行电流实现节能.仿真和样机实验表明,正确选择起动电容值可以提高电机自起动性能,实时调节补偿电容值可以获得明显的节能效果.研究工作和结论对开发高起动性能的高效单相永磁同步电动机有参考价值.     

基于絮凝技术下的薯蓣皂苷分离研究

以超声波辅助十二烷基硫酸钠水溶液萃取得到的薯蓣皂苷萃取液为研究对象,以薯蓣皂苷分离因数为评价指标,系统研究了絮凝剂种类、絮凝剂加量、体系pH值、复配条件等对薯蓣皂苷分离因数的影响.发现在最佳絮凝条件下,薯蓣皂苷的分离因数94.5%,采用该技术薯蓣皂素的得率较真空浓缩法高0.062%,该技术为实现低成本下薯蓣皂素的清洁生产奠定了基础.     

Energietransport über weite Strecken

If the regenerative energy that can be produced in a country is not sufficient for the successful implementation of the energy transition, one possible solution could be the purchase of regeneratively produced electricity from countries particularly favored by meteorology. This article examines five different technologies for energy transport. The electricity is generated once in a photovoltaic system and once in a wind turbine park. The investments in the transmission technologies sometimes exceed the investments in the power generation technologies many times over. According to the available results, without considering storage, the wind turbine system, although it is specifically more expensive than the photovoltaic system, always leads to lower electricity generation costs after the energy transport. The reason is the higher number of full load hours of the wind turbine.     

多元醇还原制取球形钴粉

以自制 Co(OH) 2 为原料 ,乙二醇为溶剂和还原剂 ,制得了分散性很好的球形超细钴粉。研究了单位体积乙二醇中 Co(OH) 2 加入量对钴粉的粒径和形貌的影响。用SEM、XRD、BET和激光粒度分析仪测试粉体的粒子形貌、晶体结构、比表面积和粒度分布。测试结果表明多元醇还原的钴粉为球形 ,以面心立方晶体为主 ,还有微量的简单六方 ;钴粉粒度分布较窄 ,平均粒径为 0 .88μm,比表面积为 3 .46m2 /g,钴含量 >99.5 %。     

Corrosion of Three Commercial Steels Under ZnCl2 –KCl Deposits in a Reducing Atmosphere Containing HCl and H2S at 400–500°C

The corrosion of three commercial steels in a reducing atmosphere containing HCl plus H₂S in the presence of ZnCl₂–KCl deposits has been investigated at 400–500°C and compared with the corrosion of the same materials in a similar gas mixture free from H₂S. The presence of H₂S in the gas accelerated the corrosion of the three commercial steels beneath ZnCl₂–KCl deposits. All materials suffered from severe corrosion with partial detachment and spalling of the external scales. Degradation of the steels resulted from the penetration of chlorine-containing species through the scale formed initially down to the metal matrix, because chorine-rich species were detected close to the alloy/scale interface. Although the corrosion resistance generally increased with increasing Cr content, even the high-Cr stainless steel SS304 is still unable to provide good corrosion resistance against the ZnCl₂–KCl deposits in the presence of H₂S due to the bad adherence of the scales to the alloy. The mechanisms of attack are discussed on the basis of thermodynamic considerations and of the active-oxidation model.     

硫酸盐还原菌在不同氧环境下对A3钢腐蚀的研究

通过静态培养实验,研究了在不同的氧环境下,硫酸盐还原菌对A3钢腐蚀的规律。实验结果表明,在相同的培养基中,严格厌氧条件下的硫酸盐还原菌对A3钢的腐蚀速率与连续的厌氧-有氧交替变换条件下的硫酸盐还原菌腐蚀的速率相差不是十分明显。     

提高铝型材表面质量的一种新途径-机械扫纹法

论述了提高铝型材表面质量的一种新途径－机械扫纹法,并着重介绍机械扫纹的方法,扫纹后型材的生产工艺和技术要点,以及用经济分析对比的数据和实际效果来证明该技术的价值。