Input‐to‐state stability of min‐max MPC scheme for nonlinear time‐varying delay systems

This paper studies the robustness problem of the min–max model predictive control (MPC) scheme for constrained nonlinear time‐varying delay systems subject to bounded disturbances. The notion of the input‐to‐state stability (ISS) of nonlinear time‐delay systems is introduced. Then by using the Lyapunov–Krasovskii method, a delay‐dependent sufficient condition is derived to guarantee input‐to‐state practical stability (ISpS) of the closed‐loop system by way of nonlinear matrix inequalities (NLMI). In order to lessen the online computational demand, the non‐convex min‐max optimization problem is then converted to a minimization problem with linear matrix inequality (LMI) constraints and a suboptimal MPC algorithm is provided. Finally, an example of a truck‐trailer is used to illustrate the effectiveness of the proposed results. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

A new admissibility condition of discrete-time singular systems with time-varying delays

This paper gives a novel delay-dependent admissibility condition of discrete-time singular systems with time-varying delays. For convenience, the time-varying delay is assumed to be the sum of delay lower bound and the integral multiples of a constant delay. Specially, if the constant delay is of unit length, the delay is an interval-like time-varying delay. The proposed admissibility condition is presented and expressed in terms of linear matrix inequality (LMI) by Lyapunov approach. Generally, the uncertainty of time-varying delay would lead to conservatism. In this paper, this critical issue is tackled by accurately estimating the time-varying delay. Consequently, the proposed admissibility condition is less conservative than the existing results, which is demonstrated by a numerical example.     

Maximum principle for mean-field jump–diffusion stochastic delay differential equations and its application to finance

This paper investigates a stochastic optimal control problem with delay and of mean-field type, where the controlled state process is governed by a mean-field jump–diffusion stochastic delay differential equation. Two sufficient maximum principles and one necessary maximum principle are established for the underlying system. As an application, a bicriteria mean–variance portfolio selection problem with delay is studied to demonstrate the effectiveness and potential of the proposed techniques. Under certain conditions, explicit expressions are provided for the efficient portfolio and the efficient frontier, which are as elegant as those in the classical mean–variance problem without delays.     

通用循环水冷却器延时关闭控制联动电路设计

目前许多大型仪器的循环冷却水系统，都没有提供相应的自动化延时关闭装置，给工作带来不便。经过分析，将主机供电系统与循环冷却水供电系统进行关联，设计了联动电路，实现了正常关机，循环冷却水系统自动延时20min后关闭。既节约了工作时间，又提高了工作效率。     

Delay time compensation based on coefficient of restitution for collision hybrid motion simulator

A hybrid motion simulator embeds a hardware experiment in a numerical simulation loop. However, it is often subjected to the inherent problem of an energy increase in the collision of two pieces of hardware in a loop because of the delay time. This paper proposes a delay time compensation method based on contact dynamics model for a collision hybrid motion simulator under delay time and establishes a compensation method for coupled translational and rotational motion. The model developed in this paper describes linear uniform motion of a floating object during the period of the delay time until the force and torque are observed and non-linear motion according to environmental stiffness after the initial delay time period in contact. By using the above model, compensation parameters are designed based on desired coefficient of restitution with iterative calculation. The proposed method achieves accurate delay time compensation and simultaneously realizes a variable desired coefficient of restitution over a wide range of frequencies. Furthermore, the compensation method for multi-dimensional motion is established under the assumption that the friction effect is very small. The efficiency of the proposed method is verified through collision experiments for the coupled motion in two dimensions.     

软件定义网络中交换机处理时延的仿真

针对目前的网络仿真工具在对软件定义网络(SDN)的仿真过程中,未考虑交换机的处理时延的问题,提出一种处理时延的仿真方法,目的是为了使仿真结果更加真实和准确。该方法首先将交换机的转发处理过程分解为对流表的查询操作和执行不同的动作;然后,利用交换机的处理器频率和访存周期,将查询流表和执行动作转换为处理时间。实验中测量了真实环境中不同配置的交换机处理时延,并与利用该方法仿真出的处理时延进行对比。实验结果表明,利用该方法仿真出的处理时延和真实交换机的处理时延基本一致,该方法能够较准确地仿真交换机处理时延。     

基于80 C196KC单片机的Smith伺服控制器

讨论全数字伺服系统中的时间滞后，通过Smith预估控制器补偿系统中的时间滞后，提出一种应用80C196KC单片机的宽范围、高精度调速的控制方案及算法。对于非滞后系统采用Smith伺服控制器，可以简化系统、提高性能指标。     

一种基于过零点的时延测量方法

信号传输时间（时延）的测量,是雷达、声纳系统的关键技术之一。本文研究了一种基于过零点的时延测量方法,在建立过零点搜索模型的基础上推导得出时延测量的测量结果表达式;定量分析了高斯白噪声条件下过零点时延测量的测量精度,得到测量误差的理论表达式。仿真与实验表明,过零点时延测量精度与信号频率、过零点数目、信噪比密切相关,当信噪比较高时,其测量精度与经典FFT法相当,而优势在于过零点时延测量的算法简单、计算量小,适用于对实时性要求较高的测量场合。     

混杂增强聚氨酯复合硬质泡沫塑料的研制

系统介绍混杂增强聚氨酯复合硬质泡沫塑料的制备情况，详细分析聚氨酯硬质泡沫塑料制备过程中的工艺问题，表征与分析其结构与性能，着重分析偶联剂对填充物增强性能的影响以及填充物含量对聚氨酯硬质泡沫塑料吸水性能的影响，介绍聚氨酯硬质泡沫塑料的应用，最后指出其发展前景。