常见塑料溶解性能研究及其混合物的选择性分离

以常见塑料为原料,以有机物为溶剂,研究了塑料在有机溶剂中的溶解性能,提出了选择性分离混合塑料的方案。结果表明,实验所选用的塑料在有机溶剂中的溶解性能和溶解条件不同;可利用塑料与有机溶剂的相容性差别分离混合塑料。     

钌钯双金属催化剂固载顺序控制及性能

以Al_2O_3、PdCl_2和RuCl_3为原料,采用水溶液浸渍法,通过控制固载顺序、制备流程以及焙烧温度等条件,制得系列负载型Ru Pd双金属催化剂,并用于对苯二甲酸二甲酯(DMT)制取1,4-环己烷二甲酸二甲酯(DMCD)的选择性加氢过程。其中,Ru和Pd的总负载量为0.3%(以催化剂总质量为基准,下同),且m(Ru)∶m(Pd)=1∶1。结果发现,采用先Ru后Pd(Ru-Pd)式固载顺序和浸渍-干燥-浸渍-干燥-焙烧(IDIDC)型制备流程,并在450℃下焙烧后,所得负载型Ru-Pd双金属催化剂的反应性能最佳,在6 MPa、180℃下,DMT转化率为89.6%,DMCD选择性为96.0%,DMCD产率为85.9%。这可能与Ru-Pd中大粒径粒子的形成受到抑制、粒径尺寸和分布更小、比表面积和总孔容更高、表面Pd原子摩尔分数较高以及Ru/Pd物质的量比较低有关。     

甲醇吹除气中氢的回收方法

对目前甲醇吹除气中氢回收的两种方法进行了比较、分析。     

C8芳烃中二甲苯和乙苯的分离技术进展

论述了用于C8芳烃中二甲苯异构体以及乙苯分离的各种吸附分离技术进展,对各种工艺和特点以及工业应用状况进行了分析比较。详细介绍了目前国内C8芳烃吸附分离装置中的工业生产状况和面临的问题及挑战。提出应抓紧开发具有自主知识产权的C8芳烃吸附分离技术,尤其是开发一种对乙苯和二甲苯同时具有高选择性、高吸附能力、容易脱附的吸附剂,实现从C8芳烃中同时得到乙苯和二甲苯高纯度产品的目的,打破国外的技术垄断。     

分子蒸馏技术与日用化工(Ⅰ)——分子蒸馏技术的原理及特点

介绍了分子蒸馏技术发展简况，并从分子运动平均自由程的定义出发，介绍了分子蒸馏技术的基本原理、特点以及与常规蒸馏、超临界萃取与层析分离等方法的不同。分子蒸馏操作温度低、受热时间短及分离效率高，特别适用于热敏性物质的提纯，有广阔的应用前景。     

催化裂化降烯烃废催化剂磁分离回收工艺

本项研究采用永磁强磁场技术研制出了具有高磁感应强度的小型磁分离试验装置。利用该装置进行了FCC降烯烃平衡催化剂磁分离工艺条件考察试验,同时还对磁分离样品进行了FCC小型提升管对比评价试验。试验结果表明该技术处于国内领先水平。     

膜分离活性污泥法在辣根废水处理中的应用

本文以处理辣根废水为例，介绍一种新的水处理方法-膜分离活性污泥法，并阐述了膜分离活性污泥法如何解决污泥膨胀问题以及传统活性污泥法所不具有的特性。     

碳黑水分离技术的研究

脱油沥青作为谢尔气化工艺的气化原料生产化肥在国内尚属首次,由于沥青原料中的灰分和重金属比渣油原料大得多,若仍采用石脑油萃取碳黑技术,灰分和重金属随碳黑返回气化装置,将造成设备的堵塞、磨损,无法保证设备安稳长期运行.通过对碳黑水分离技术进行多方面的研究,寻找到适宜的工艺路线与解决方案.     

SEPARATION AND ENRICHMENT OF WEAK ORGANIC ACIDS OR BASES BY IMMOBILIZED LIQUID MEMBRANES

A new and effective liquid membrane process to achieve both separation and enrichment simultaneously of weak organic acids or bases was developed. The process utilizes effectively the difference in the apparent partition coefficient of the constituent species between the aqueous and organic phases, and uses the change of the apparent partition coefficients with the hydrogen ion concentration of the aqueous phase. For such a fundamental model apparatus as a diaphragm diffusion cell being operated batch wise, the effects of pK value of solutes, permeability of solutes through the membrane, volume ratio of liquids in two aqueous phases, and pH value of aqueous phase on enrichment factor and selectivity for the solute to be concentrated were discussed analytically. Separation and enrichment were demonstrated using aqueous mixed solutions of fumaric acid and L-malic acid. The results were in good agreement with the theoretical predictions.     

Electrochemical characteristics of phase-separated polymer electrolyte based on poly(vinylidene fluoride-co-hexafluoropropane) and ethylene carbonate

A polymer electrolyte based on microporous poly(vinylidene fluoride-co-hexafluoropropane) (PVdF-HFP) film was studied for use in lithium ion batteries. The microporous PVdF-HFP (Kynar 2801) matrix was prepared from a cast of homogeneous mixture of PVdF-HFP and solvents such as ethylene carbonate (EC), dimethyl carbonate (DMC), and ethyl methyl carbonate (EMC). After evaporation of DMC and EMC, a sold film of the PVdF-HFP and the EC mixture was obtained. EC-rich phase started its formation in the PVdF-HFP/EC film at EC content of about 60 wt.% based on the total weight of PVdF-HFP and EC. The formation of the new phase resulted in the abrupt increase of the porosity of the PVdF-HFP matrix from 32 to 62%. The ionic conductivity of the film soaked in 1 M LiPF₆-EC/DMC=1/1 was significantly increased from order of 10⁻⁴ S/cm to order of 10⁻³ S/cm at the EC content of 60 wt.%. Thermal and spectroscopic investigations showed that most of the EC interact with PVdF-HFP with the EC content being below 60 wt.%. MCMB/polymer electrolyte/LiCoO₂ cells employing the microporous PVdF-HFP polymer film showed stable charging/discharging characteristics at 1C rate and good rate capability.