印制板蚀刻、微蚀刻废液的再生和铜回收的技术及设备

传统的印制板蚀刻废液处理方法存在着工艺落后、操作不便、二次污染、效益不高等问题,本工艺采用特殊的萃取电解、吸附电解技术,使蚀刻废液得以再生循环利用,铜得以100%回收,低含铜废水铜得到98%回收,整个系统不产生二次污染,获得的铜为高纯度铜板,在实现污染控制的同时,废液废水得到了资源化利用。     

载银无机抗菌剂变色抑制剂研发现状

介绍了载银无机抗菌剂变色抑制剂如甲基苯并三唑、天然水滑石和合成水滑石等的研发现状     

分布式供电和冷热电联产的前景

文中通过分布式供电特点及其发展趋势的阐述,强调了该供电特点是集中供电的重要补充,并且指出可再生能源将为分布式供电提供更为广阔的发展前景。同时,还认为分布式供电技术的主要发展方向为“冷热电三联产”技术。     

A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380     

高铅硫化铜精矿的二段焙烧

高铅硫化铜精矿进行湿法铜铅分离时，焙烧过程因有低熔点组份产生，使培砂中铜浸出率仅为73％～82％，达不到工艺要求。经二段焙烧后消除了上述影响，铜浸出率达到97．4％，实现了铜铅分离。     

微结构量子器件

微结构量子器件是八十年代中期伴随着微结构物理的发展而出现的一种新的半导体器件,这种器件以量子力学原理工作,具有常规“经典”器件无法比拟的优异特性。本文在简要介绍了微结构系统电子状态的基础上,较详细地描述了量子谐振隧道器件以及量子线和量子点激光器的基本原理、特点及其应用前景。     

Advantages of high-field tokamaks for fusion reactor development

High-field designs could reduce the cost and complexity of tokamak reactors. Moreover, the certainty of achieving required plasma performance could be increased. Strong Ohmic heating could eliminate or significantly decrease auxiliary heating power requirements and high values of n_E could be obtained in modest-size plasmas. Other potential advantages are reactor operation at modest values of , capability of higher power density and wall loading, and possibility of operation with advanced fuel mixtures. Present experimental results and basic scaling relations imply that the parameterB ²a, where B is the magnetic field and a is the minor radius, may be of special importance. A superhigh-field compact ignition experiment with very high values ofB ²a (e.g.,B ²a=150 T² m) has the potential of Ohmically heating to ignition. This short-pulse device would use inertially cooled copper plate magnets. Compact engineering test reactor and/or experimental hybrid reactor designs would use steady-state, water-cooled copper magnets and provide long-pulse operation. Design concepts are also described for demonstration/commercial reactors. These devices could use high-field superconducting magnets with 7–10 T at the plasma axis.     

轴承钢和阀门钢线材的生产工艺

简要介绍了重庆钢铁股份有限公司高速线材厂的生产设备概况;为在普碳钢生产线上生产轴承钢、阀门钢线材,通过合理控制加热、轧制、控制冷却工艺,不仅使设备运行稳定,而且满足了用户对产品的外形尺寸、性能等要求。     

Inhibition behavior for copper corrosion by photoelectrochemical methods

wavelengthofmono chromatelightwas 4 2 0nm .3　RESULTSANDDISCUSSION3.1　ApplicationofphotoelectrochemicalmethodtoevaluatetheeffectsofinhibitorsforcoppercorrosionThestructuresoftheinhibitorsforcoppercorro sionshownintextareasfollows:Theinhibitioneffectsofdifferentinhibitorsforcoppercorrosioncanbeevaluatedby photoelec trochemicalmethod .AsshowninRef .[12 ],onanegativepotentialscan ,thepotentialcorrespondingtothecathodicphotocurrentJph=0isdefinedasΦV,atwhichCu2 Oontheelectrodesurfaceisc…     

从铜镉渣中回收镉的试验研究

本文介绍了从铜镉渣中回收镉的试验研究情况，采用酸浸-铜镉渣中和-锌粉除铜法处理铜镉渣，工艺简单合理，镉直收率高，有一定的推广价值。