Transfer efficiency for airless painting systems

Spray transfer efficiency (TE) is defined as the mass fraction of sprayed paint which is deposited on the intended target, the remainder of the sprayed paint becomes undesirable overspray. The relationship between TE and gun supply pressure (or paint mass flow rate), gun-to-target distance, gun traverse speed, the angle of the spray gun relative to the target (gun-to-target angle), plus spray cone angle is reported herein for a typical fan spray system. Experimental results indicate that spray momentum rate (SMR) and droplet size dictate the TE for the various combinations of parameters considered here. The key finding is that TE correlates with SMR and spray mean drop size (Sauter mean diameter, or D₃₂) via an expression of the form TE=a+b SMR − c (SMR)²+d D₃₂, where a, b, c, and d are coefficients, determined by fitting the experimental data, and SMR is estimated via SMR=m²/ρA, where the paint mass flow rate m, the paint density is ρ, and the gun exit orifice effective tip cross sectional area is A. This expression accounts for physical phenomena that govern sprayed droplet deposition characteristics, such as entrainment, bounce-back, and drop size. Experimental results also show that, for the range of parameters studied, gun traverse speed has no effect on TE, but increasing the angle of the spray gun relative to the target (gun-to-target angle), increasing the spray cone angle, or increasing the gun-to-target distance will decrease TE.     

Numerical solution of viscous flow past a solid sphere with the control volume formulation

The control volume formulation with the QUICK finite difference scheme is used to solveincompressible liquid flow past a solid sphere in terms of stream function and vorticity.Several tech-nical points are addressed on improving the accuracy and efficiency of numerical simulation of similarproblems of fluid flow.In particular,the importance of suitable specification of the distortion func-tion to enforcing the far field boundarv conditions is emphasized.     

Volume phase transition of polyelectrolyte gels in dimethyl sulfoxide/ tetrahydrofuran mixtures

Copolymer gels were prepared from 2-(acrylamido)-2-methylpropanesulfonic acid (AMPS), N,N-dimethylacrylamide (DMAA, comonomer) and N,N′-methylenebis(acrylamide) (BIS). The mole fraction of AMPS were 0.2674 and 0.4318, respectively, with the same BIS mole fraction of 0.013. These gels with counterions H⁺, Na⁺, and K⁺ were swollen at 25°C in mixtures of dimethyl sulfoxide (DMSO) and tetrahydrofuran (THF). A volume phase transition was observed at the THF volume fraction of about 0.58, indicating that the volume phase transition in a polyelectrolyte gel occurs when the medium polarity decreases sufficiently for ion-pair formation. On changing the counterion, the fraction of DMSO in the solvent mixture which is required to initiate swelling decreases in the order Na⁺, H⁺, and K⁺, the same as for counterion condensation in identical gels.     

静电喷涂技术在溶剂型涂料中的应用

介绍了静电喷涂的原理、工艺和静电漆料的配方设计原则，从理论和实践上证实了静电喷涂工艺具有较好的经济效益和环境效益。     

Ag-ZnO catalysts for UV-photodegradation of methylene blue

High surface area Ag-ZnO catalysts have been made by flame spray pyrolysis (FSP) and characterized by X-ray diffraction (XRD), nitrogen adsorption, UV–vis spectroscopy and electron microscopy (SEM and transmission electron microscopy (TEM)) combined with energy dispersive X-ray spectroscopy (EDXS) for elemental mapping. Silver metal clusters deposited directly on ZnO nanocrystals were obtained from this process. The Ag loading (1–5 at.%) controlled the Ag cluster size from 5 to 25 nm but did not influence the ZnO crystal size. Photodegradation of 10 ppm methylene blue (MB) solution was used to evaluate the performance of these FSP-made Ag-ZnO and was compared to wet-made Ag-ZnO and reference titania photocatalysts. The rate of photodegradation was optimal for Ag loading around 3 at.%. The best photocatalytic performance was exhibited by flame-made Ag-ZnO produced at the longest high-temperature residence times having high crystallinity as determined by XRD and UV–vis.     

喷雾干燥的节能分析

喷雾干燥是能耗较大的单元操作,节能工作十分重要。对喷雾干燥过程中的热量分配作了计算分析,并根据作者对喷雾干燥过程的研究及编制的程序对各种操作因素对干燥过程能耗的影响进行了分析评价,给出了干燥过程的节能措施。     

Investigation of free volume,interfacial, and toughening behavior for cyanate ester/bentonite nanocomposites by positron annihilation

Effects of filler on microstructure and toughening behavior of cyanate ester (CE)/bentonite (BT) nanocomposites with different content of BT have been studied by positron annihilation lifetime spectroscopy, X‐ray diffraction, transmission electron microscopy, dynamic mechanical analysis, etc. The interesting results found by PALS indicate that the size and concentration of the free volume holes and the apparent free volume fraction increased with increasing the content of BT, which indicates that adding nano‐layers to thermosetting materials can lead to the high crosslinking density structure “looser.” The experimental results reveal that the increases in size of free volume holes and apparent free volume fraction are related to the increasing conversion of cure reaction. On the other hand, the mechanism of toughening (by adding the nano‐clay to the thermosetting material) has been discussed by combining free volume and interfacial property. It is shown that, for the high crosslinking thermosetting material‐based nanocomposites, both the property of free volume and dispersion state of nano‐layers are the two key factors in determining toughening property. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1509–1515, 2006     

超长、超大基坑开挖对邻近地铁结构安全影响的数值模拟分析

为了研究超长、超大基坑开挖对邻近地铁结构安全影响,以西安地铁2号线周边某基坑为工程实例,通过运用数值分析软件,结合场地的水文地质和工程地质条件,建立数值模型,进行施工过程的动态模拟,同时进行现场监测,经对比数值模拟结果及监测数据,表明运用PLAXIS软件能有效的模拟基坑开挖过程中的土体变形。同时工程采用的分段、分块开挖,中心岛顺做,周边预留土台反压、使用旋喷锚索的支护方案,对复杂条件下基坑开挖对邻近地铁结构的变形影响能起到有效的控制作用,可对类似工程的设计优化提供有益的参考及借鉴。     

A fuzzy neural network approach for online fault detection in waste water treatment process

In this paper, an effective strategy for fault detection of sludge volume index (SVI) sensor is proposed and tested on an experimental hardware setup in waste water treatment process (WWTP). The main objective of this fault detection strategy is to design a system which consists of the online sensors, the SVI predicting plant and fault diagnosis method. The SVI predicting plant is designed utilizing a fuzzy neural network (FNN), which is trained by a historical set of data collected during fault-free operation of WWTP. The fault diagnosis method, based on the difference between the measured concentration values and FNN predictions, allows a quick revealing of the faults. Then this proposed fault detection method is applied to a real WWTP and compared with other approaches. Experimental results show that the proposed fault detection strategy can obtain the fault signals of the SVI sensor online.     

Molar volume and ultrasonic studies of europium soaps in mixed organic solvents

The ultrasonic velocity and density measurements of europium soaps in a mixture of benzene and methanol (3:2, vol/vol) were used to evaluate various acoustic parameters and molar volume and to determine the critical micelle concentration. The results showed that the ultrasonic velocity, specific acoustic impedance, molar sound velocity, and molar compressibility increase, and intermolecular free length, adiabatic Compressibility, and relative association decrease with increasing concentration and chainlength of the soap. The results were interpreted in terms of soap-solvent interaction.