用除尘灰分离炭粉制备活性炭及其改性研究

以除尘灰分离炭粉为原料，确定了制备颗粒活性炭的最佳工艺，并对制备的颗粒活性炭进行不同的改性处理和对不同有机蒸气的吸附实验。利用X—光电子能谱仪分析了改性处理后的表面化学性质。吸附实验证明，活性炭的比表面积、表面化学性质和有机物的性质对吸附过程产生影响。     

城市污泥的处理及污泥制活性炭的研究现状

介绍了国内外一些污泥处理减量化技术及研究进展,分析了几种常用的污泥处置方法及存在的问题.用城市污水厂污泥制备活性炭,可以用于污水处理,去除有毒有害物质,具有良好的环境效益和社会效益.     

变压器油色谱分析与故障判断及处理

阐述变压器油气体色谱分析与变压器内部故障之间的内在联系，通过色谱分析监测变压器的运行状况，并介绍变压器油气体色谱超标在线脱气处理方法。     

β-环糊精-氧化石墨烯超分子杂化体的构筑及应用进展

β-环糊精是由7个D-吡喃葡萄糖单元通过α-1,4-糖苷键键连成环的超分子主体分子，“内疏水、外亲水”的独特结构赋予了其优异的分子识别能力；氧化石墨烯类材料凭借其优良特性成为近几年的研究热点。由β-环糊精和氧化石墨烯构筑的超分子杂化体在兼具二者特有性能的基础上又有新功能的引入。本文综述了β-环糊精-氧化石墨烯超分子杂化体的构筑方式，按二者间的连接方式，分别为共价键和非共价键两种连接方式，其中通过共价键连接是目前最主要的构筑方式；此外对β-环糊精-氧化石墨烯超分子杂化体的特征和表征进行了简述。同时对β-环糊精-氧化石墨烯超分子杂化体在水污染处理、电化学检测、药物控释和催化等领域的应用进展进行了综述。最后对该超分子杂化体在构筑和应用上的发展趋势进行了展望。     

高档水基油墨粘度影响因素的研究

为获得高固低粘的油墨配方体系,通过油墨的分散实验,探讨了分散树脂和乳液及其助剂对水基油墨体系粘度的影响规律,润湿分散剂对水基油墨粘度的影响,胺化剂对水基油墨粘度的影响机理。研究表明,乳液聚合物具有高固低粘特性,拼混使用不同的聚合物可获得理想粘度和应用性能;润湿分散剂能改变体系的表面张力和润湿性能,从而降低水基油墨体系的粘度;拼混使用不同的胺化剂可以获得粘度稳定的水基油墨体系。     

稠油污水的有机组成及可生化性研究

采用物化-厌氧-好氧法处理稠油污水,对物化生化处理各阶段出水的有机组分进行定性分析,并对稠油污水的可生化性进行了进一步研究。研究结果表明:不同处理工序出水的有机成分差异较大,经过气浮、厌氧处理后,稠油污水可生化性逐步提高,有利后续好氧生物处理。     

催化湿式氧化处理农药废水的研究

利用担载型双金属活性组分催化剂，考察了反应温度、压力、进料空速和V（空气）：V（H2O）（体积比）等反应条件对催化湿式氧化处理某农药废水效果的影响。对于该种废水，在4．2MPa，245℃，空速为2．0h^-1，V（空气）：V（H2O）＝300的反应条件下，废水的COD去除率可达到91．3％。经处理后废水的BOD5／COD＞0．5，说明其可生化性能良好。     

Surface properties of block and graft polystyrene–polydimethylsiloxane copolymers

The surface compositions of a series of polystyrene‐b‐polydimethylsiloxane (PS‐b‐PDMS) and polystyrene‐g‐polydimethylsiloxane (PS‐g‐PDMS) copolymers were investigated using ATR‐FTIR and XPS technique. The results showed that enrichment of PDMS soft segments occurred on the surface of the block copolymers as well as on that of graft copolymers. And the magnitude order of the enrichment was as follows: PS‐b‐PDMS > PS‐g‐PDMS, which was attributed to the facilitating of the movement of the PDMS segments in PS‐b‐PDMS copolymer. Meanwhile, the solvent type and the contact medium had influence on the accumulation of PDMS on the surfaces. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Capacitance behavior of activated carbon fibers with oxygen-plasma treatment

Modified activated carbon fibers (ACFs) were used as the electrodes of an electric double-layer capacitor and showed an enhanced capacitance effect after a RF-plasma treatment. The capacitance and the surface functional groups of the ACFs were studied. For the plasma-treated ACFs having a specific surface area of 1500 m² g⁻¹, the capacitance increased by 28% compared to the untreated sample and the highest electric capacitance value of 142 F g⁻¹ was achieved with an oxygen feed concentration of 10 vol.%. The Brunauer-Emmett-Teller (BET) surface area was 2103 m² g⁻¹, which was 34% higher than that of the untreated sample. The pore volume was similarly increased to 483.1 cm³ g⁻¹ STP, and from the pore distribution plot, quantities of mesopores of 10 nm or less and micropores also increased. However, in order to enhance the capacitance, the quinone functional group had a significant influence in addition to the BET surface area. The correlation between the capacitance and the number of quinone functional groups was confirmed because quinone is an electron acceptor.     

Raman spectra of virgin and damaged graphite edge planes

First-order Raman spectra of virgin and ion irradiated highly oriented pyrolytic graphite were performed along the basal and edge planes. Ion irradiation was performed in the low fluence regime (≈ 10¹²–10¹³ ions cm⁻²) using a 400 keV Ar⁺ beam in order to a introduce controlled amount of defects in the structure. Virgin edge Raman spectra reveal the presence of a 1351 cm⁻¹ structure (D^*) shifted 10 cm⁻¹ away from the disorder induced D-line found upon irradiating or grinding the graphite surface.The 1351 cm⁻¹ D^* structure is then considered as the feature coming from the rupture of the D_6h⁴ space group symmetry. A comparison between D^* and the classical 1360 cm⁻¹ D-line is discussed in terms of induced disorder.