生物制剂在SBR中的工业化试验

在处理炼油废水的SBR装置中加入一种生物促进剂和毒性缓冲剂,在投加量均为7mg/L的条件下,与未投加生物促进剂时相比,出水COD的去除率增加约50%,挥发酚由20mg/L降至4.9mg/L,污泥浓度由3.9g/L提高到4.9g/L,污泥絮体增大,结构紧密。     

Ozone Treatment of Surface Water to Provide High Quality Cooling Water and Process Water

The characteristic feature of this cooling tower water treatment is the intermittent addition of ozone for several days.     

热处理条件对硅酸盐玻璃中原位形成银纳米颗粒的影响

用离子交换结合热处理法制备银(Ag)纳米颗粒-玻璃复合材料.用透射电镜、高分辨透射电子显微镜、Ruthefford背散射谱和紫外-可见光吸收光谱研究了热处理条件对玻璃中原位形成Ag纳米颗粒的影响.结果显示:随着热处理温度升高,玻璃表面的Ag原子逐渐向玻璃内部扩散,其表面摩尔浓度逐渐降低.提高热处理温度和延长热处理时间都有利于提高玻璃中Ag纳米颗粒的体积分数.空气中,高温热处理高掺Ag量的白玻璃样品时发生二次成核,因此,Ag纳米颗粒尺寸呈双峰分布.Ag纳米颗粒尺寸的双峰分布导致其等离子体共振吸收峰出现双峰.在氢气气氛中,在250℃热处理2min,即可在玻璃中形成大量Ag纳米颗粒,颗粒尺寸小于空气中高温热处理样品的尺寸,从而引起表面等离子体共振吸收峰发生蓝移.     

阳离子型双子表面活性剂的合成及表面活性

合成了一种季铵盐型双子表面活性剂Gem in i 12-3-12,采用红外光谱、元素分析和两相滴定法对其结构和纯度进行了分析,测定了不同浓度表面活性剂水溶液的表面张力,并得到临界胶束浓度(CMC)、饱和吸附量(Γm ax)、单分子饱和吸附面积(Am in)。结果表明,Gem in i 12-3-12的收率为77.2%,纯度为98.4%,它与相应的单尾基十二烷基三甲基溴化铵(DTAB)的表面活性相当,但CMC比DTAB低14倍左右。     

纳米碳酸钙的表面活化改性研究

本文主要介绍通过加入特定的表面改性剂,制得了表面改性的活性碳酸钙.并对活化过程中的一系列影响因素,如活化温度、活化时间、碳酸钙悬浊液浓度、表面改性剂用量进行了研究.     

处理硝基苯类废水的Fenton催化氧化技术研究现状

硝基苯类化合物是高毒性物质,难以生物降解且对生化反应有抑制和毒害作用.因此,硝基苯对环境的污染问题越来越受到科学研究者的关注.目前,采用Fenton氧化技术降解硝基苯类化合物的机理和工艺研究越来越活跃.作者就近几年来国内外Fenton催化氧化技术降解硝基苯类废水的研究现状进行了综述.     

重组G145R HBsAg亲和纯化方法的建立及其应用

目的建立重组乙型肝炎病毒G145R变异HBsAg抗体亲和纯化方法。方法用抗-HBs单克隆抗体(D12- McAb)制备亲和层析胶,对2A8细胞(分泌G145R变异HBsAg)培养上清盐析物进行亲和纯化。采用SDS-PAGE、Western blot及ELISA,对纯化产物的纯度、特异性、含量和回收率进行鉴定,并与同法纯化的HBsAg阳性血清及r-wHBsAg提取物进行比较。结果D12-McAb对重组真核表达G145R变异HBsAg、HBsAg阳性血清及r-wHBsAS三者具有相似的亲和性,产物纯度分别为90.3%、95.2%和93.1%,回收率分别为43.3%、72.0%和66.4%。结论已成功地建立了重组G145R变异HBsAg抗体亲和纯化方法,为G145R变异以及其他HBV免疫逃逸变异感染的深入研究奠定了重要的技术基础。     

Ammonia synthesis: The bellwether reaction in heterogeneous catalysis

This is a personal account of the Havreholm Conference with a choice of topics dealing with catalytic ammonia synthesis. Among the general concepts that were retained are: the rate determining step with rates of adsorption and desorption of nitrogen; the direct activated dissociative adsorption of N₂; the surface crystalline anisotropy of iron; the role of promoters in industrial iron based catalysts; and the atomic structure of the metallic surface on the industrial multiply promoted catalyst. Finally, a new isotope jump technique to measure an upper limit to the real turnover frequency is discussed.     

Effect of Surface Forces on Subcritical Crack Growth in Glass

Data on the growth of cracks tested in aqueous solutions were interpreted in terms of surface force theory. For applied stress intensity factors greater than 0.25 MPa · m½, the position and the slope of the curves and their dependence on pH and ion concentration can be explained in terms of surface force theory, provided these forces are of a magnitude and range that are representative of those involved in the cohensive bonding of solids. Weaker forces, such as structural, double-layer, or dispersion forces, have little effect on crack growth in silica glass for K _I > 0.25 MPa · m½.     

Effect of Twin-Plane Reentrant Edge on the Coarsening Behavior of Barium Titanate Grains

When BaTiO₃ ceramics were sintered at relatively low temperatures (≤1250°C), the grains with reentrant edges caused by a (111) double twin grew exclusively. As a result, a microstructure with a bimodal grain-size distribution composed of platelike large grains and fine matrix grains was obtained. In contrast, at the usual sintering temperature between 1250° and 1350°C, grains containing a (111) double twin did not exhibit any growth advantage. In this case, a coarse and uniform microstructure was obtained. When this coarse-grained specimen was further heat-treated at 1365°C, the grains possessing a double twin were observed to grow exclusively again. The results were explained in terms of a coarsening process controlled by two-dimensional nucleation.