自行车椭圆链轮传动机构的分析设计

分析了自行车的连续圆周运动不能使脚蹬力均匀变化的特性,对传统自行车的传动机构中存在的问题进行了改进。本文基于人机工程学原理用椭圆链轮代替主动圆链轮作为自行车的不等速传动装置,对该传动机构进行了优化,克服了自行车传动过程中出现的缺点,能最大限度的发挥人体结构的用力功能,从而推广了自行车的新应用。     

Energy flux characteristics of seismic waves at the interface between soil layers with different saturations

Based on the multiphase poroelasticity theory describing the propagation of waves in the unsaturated fluid-saturated porous medium, the reflection and transmission coefficients of the seismic waves at the interface between soil layers with different saturations are obtained. Our unsaturated model consists of a deformable skeleton in which two compressible and viscous fluids (i.e., water and gas) flow in the interstices. Three compressional waves (i.e., P1, P2, and P3 waves) and one shear (i.e., S wave) wave exist in the unsaturated soils. The expressions for the energy ratios of the various reflected and transmitted waves at the interface during the transmission and reflection processes are presented in explicit forms accordingly. At last, numerical computations are performed and the results obtained are respectively depicted graphically. The variation of the energy ratios with the incident angle, wave frequency and saturation degrees of the upper and lower soil layers is illustrated in detail. The calculation results show that the allocation of incident seismic waves at the interface is influenced not only by the angle and frequency of the incident seismic waves, but also by the saturations of the upper and lower soil layers. It is also verified that, at the interface, the sum of energy ratios of the reflected and transmitted waves is approximately equal to unity as was expected. This study is of importance to several fields such as geotechnical engineering, seismology, and geophysics.     

输电线路两相短路故障行波分析

对于输电线路的行波定位而言,故障行波的分析具有重要研究意义。本文利用叠加原理和相模变换方法分析了两相经过渡电阻短路情况下初始行波、折射行波、反射行波的幅值、极性、折反射系数与波阻抗及过渡电阻的关系,最后给出了相应的结论。     

Consecutively spin-assembled layered nanoarchitectures of poly(sodium 4-styrene sulfonate) and poly(allylamine hydrochloride)

The recently established spin-coating electrostatic self-assembly (SCESA) technique has been shown to facilitate not only the rapid fabrication of polyelectrolyte multilayer assemblies, but also allow each layer to be easily controlled on a monomolecular scale by minimizing the film thickness across a substrate surface. In this paper, the influence of polyelectrolyte concentration on the amount and thickness of spin-deposited polymer films has been examined for a multilayer system of poly(allyamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS), when the washing steps employed for removing weakly bound polyelectrolytes on a resultant film on a substrate are excluded from the standard fabrication procedure of the SCESA method. The thickness of the spin-deposited PAH/PSS bilayer increased linearly for the PSS concentrations in the range from 1 to 10 mM with PAH constant at 1 mM, which demonstrates the uniform deposition of each layer material onto the thin film. The thickness of PAH/PSS bilayers increased from 1.43 ± 0.06 to 3.37 ± 0.08 nm as the PSS concentration increased from 1 to 10 mM, while the PAH concentration was kept constant at 1 mM. The multilayer films were found to be stable in a good solvent (H₂O) for at least 30 h, without any noticeable loss of the adsorbed layer component of the polyelectrolyte. This improvement to the SCESA method (exclusion of washing steps) provides a convenient way to create multilayer heterostructures with the thickness of each layer being easily adjusted.     

Assurance of uniformity of measurements of spectral and dispersion characteristics in fiber-optic information transmission systems with wavelength-division multiplexing

The state and problems involved in achieving the uniformity of measurements in the field of fiber-optic information transmission systems and their components are considered. Possible approaches to the solution of these problems and the basic methods and techniques that have been developed in Russia up to this point are analyzed. __________ Translated from Izmeritel’naya Tekhnika, No. 5, pp. 30–34, May, 2006.     

Comparison of structural and photoluminescence properties of ZnO thin films grown by pulsed laser deposition and ultrasonic spray pyrolysis

ZnO thin films have been deposited by pulsed laser deposition (PLD) and ultrasonic spray pyrolysis (USP) method, respectively. X-ray diffraction and transmission electron microscopy characterizations indicate that ZnO film grown by PLD exhibits better crystallinity than that grown by USP. Photoluminescence spectra show that the near-band edge ultraviolet emission of film grown by PLD is narrower and shifts to higher energy, compared with that of film grown by USP. In the visible range, ZnO film grown by PLD exhibits four local level emission centered at 470 nm, 486 nm, 544 nm, and 613 nm, respectively, while the film grown by USP only presents a weak broad band emission centered at 502 nm. Hall measurement shows higher carrier density and lower hall mobility in ZnO film grown by PLD than that in film grown by USP. The higher density of intrinsic defects as well as higher crystallintiy is considered to account for the difference of photoluminescence in ZnO film grown by PLD with that in film grown by USP.     

Nanoluminograph — A New Generation of Measuring Instruments

A nanoluminescent device, or nanoluminograph, has been developed, created, and patented. By means of the device, unique information about the physicochemical properties of surface and near-surface layers of solids and ultrathin coatings of thickness less than 0.4 μm may be obtained. There is also the hope of decreasing the thickness of the subject layer with further development of the detecting component of the device. __________ Translated from Izmeritel'naya Tekhnika, No. 8, pp. 28–31, August, 2005.