分子内敏化鎓盐的合成及光敏性研究

二芳基碘鎓盐和三芳基硫鎓盐是阳离子聚合的光引发剂和光敏产酸物,但他们在300nm以上的光吸收很低,限制了对紫外光的利用效率。为解决此问题,本文合成了一些新的碘鎓盐和硫鎓盐,并用凝胶时间方法考察了它们的光引发效率。实验结果表明,2-苯硫基甲基,2′,4′-二甲基二苯碘鎓盐和9-蒽丙基,二苯基硫鎓盐具有特别高的光引发效率,这归之于光照时这些鎓盐发生了分子内电荷转移反应,即发生了分子内敏化。9-蒽丙基二苯硫鎓盐分子中的蒽基(An)是电子给体也是敏化基团,光照时可发生如下反应:     

On the nature of the active state of silver during catalytic oxidation of methanol

Under the applied high reaction temperatures (900 K) the Ag surface is restructured and a tightly held oxygen species is formed on the surface (O) apart from O atoms dissolved in the bulk (O). Methanol oxidation to formaldehyde proceeds through this O species as demonstrated by application of a variety of spectroscopic techniques.     

Morphologies and microstructures of tree-like carbon produced at different reaction conditions in a CVD process

Centimeter-size multi-branched tree-like carbon structures have been generated by the catalytic chemical vapor deposition of toluene using ferrocene as the catalyst precursor and investigated by means of SEM, TEM, and EDX. It is found that a temperature of 1000-1200 °C and a carrier gas flow rate of 1000-2500 ml/min are necessary for the generation of the carbon trees. Their morphologies and microstructures change greatly with the changing reaction conditions. The fractal dimensions of the trees are calculated to quantitatively investigate the influence of different reaction temperatures on the morphologies.     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

Synthesis of carbon nanocapsules containing Fe, Ni or Co by arc discharge in aqueous solution

A simple, inexpensive and one-step synthesis method of metal-containing carbon nanocapsules using an arc discharge in aqueous solution is reported. It was found that Ni, Co and Fe nanoparticles could be in situ encapsulated in carbon shells when the arc was performed respectively in aqueous solutions of NiSO₄, CoSO₄ and FeSO₄. Transmission electron microscopy, energy dispersive X-ray spectroscopy and electron diffraction patterns of selected areas were used to determine the crystalline phase of the metal cores. To explain the formation mechanism of metal-containing carbon nanocapsules, a model of discharge in solution is proposed. This result presents a simply controllable way to synthesize metal-containing carbon nanocapsules.     

Scrolls and nested tubes in multiwall carbon nanotubes

Recent high-resolution transmission electron microscopy (HREM) studies of multiwalled carbon nanotubes (MWCNTs) reveal a class of defects analogous to edge dislocations in a crystal. These defects are believed to mark the transition from scrolls on one side to nested tubes on the other. On the tube side, layer spacing becomes irregular. Analysis of the helicity of the tubes shows a strong correlation between diameter and helicity. This suggests that the organizing principle for the tubes is not Van der Waals forces, as in the case of graphite or turbostratic carbon, but preservation of helicity. Based on these observations and total energy calculations, the authors speculate that graphene monolayers initially form scrolls and subsequently transform into multiwall nanotubes through the progression of defects. Scrolls and nested tubes thus coexist within a single MWNT.     

Influence of untreated and novel electron‐beam‐modified surface‐coated silica filler on the thermorheological properties of ethylene–octene copolymer

We developed surface‐modified silica fillers by coating these with an acrylate monomer, trimethylolpropane triacrylate, or a silane coupling agent, triethoxyvinyl silane, followed by electron‐beam irradiation at room temperature. These were incorporated in an ethylene–octene copolymer rubber. Thermorheological studies of the unvulcanized ethylene–octene copolymer and its untreated and modified silica‐filled composites were done with a shear dynamic oscillating rheometer. Modification of the silica filler, especially via the silanization process followed by electron beam treatment, significantly reduced filler–filler networking as revealed from the log–log plots of storage modulus and complex shear viscosity, and its real component. The rheological complexity of the compositions was analyzed from a double logarithmic plot of the storage modulus and loss modulus. The results obtained from the master curves constructed on the basis of the time–temperature superposition principle and the activation energy calculated from the Arrhenius equation for the flow of above these compounds further supported these findings. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2453–2459, 2003     

Effects of oxidation on I2 doping of trans-polyacetylene as studied via e.s.r. and conductivity measurements

Oxidation of trans-polyacetylene lowers the activation energy for conduction from 16 kcal mol^?1 to 11 kcal mol^?1 for oxidation levels of (C₂H₂O_n)_x, n = 0.144, 0.207 and 0.550. Maximum conductivity levels for 0 < x < 0.144 doped with I₂ were almost identical. At long I₂ doping times all samples exhibited some loss of conductivity. E.s.r. experiments indicate that: (1) linewidth is directly proportional to oxygen content, and (2) iodine doping is not diffusion controlled. All data are consistent with a molecular picture of PAC consisting of highly reactive localized spin states that are selectively oxidized, and less reactive delocalized states that affect conductivity more strongly via doping.     

A growth mark method for studying growth mechanism of carbon nanotube arrays

A novel and simple growth mark method was developed to make marks during the growth process of carbon nanotube arrays. These marks can be read out under scanning electron microscope or optical microscope. Based on this method, the growth rates at different temperatures and under different acetylene partial pressures were measured, from which the activation energy and the order of reaction were determined. Based on our experimental results, the growth of carbon nanotube arrays in our experimental condition could not be diffusion-limited. The measured activation energy could possibly be attributed to the heterogeneous decomposition of acetylene over the catalyst particle. Furthermore the marked array with special segmental structure may be found some applications in the future.