Syngas production via combined oxy-CO2 reforming of methane over Gd2O3-modified Ni/SiO2 catalysts in a fluidized-bed reactor

In this research, Ni/SiO₂ catalyst was modified with different amount of Gd₂O₃ and characterized with temperature-programmed desorption of CO₂ (CO₂-TPD) and NH₃ (NH₃-TPD), temperature-programmed reduction with H₂ (H₂-TPR) and X-ray diffraction (XRD). It was found that Gd₂O₃-modified Ni/SiO₂ catalysts possessed higher CO₂ adsorption and activation ability due to the formation of surface carbonate species. H₂-TPR and XRD characterizations found that the strong interaction among nickel, Gd₂O₃ and SiO₂ took place, which improved the dispersion of Ni. Gd₂O₃-modified Ni/SiO₂ catalysts exhibited higher activity and stability for the combined oxy-CO₂ reforming of methane in fluidized-bed reactor. The H₂/CO ratio in produced syngas could be controlled via controlling reaction temperature and CO₂/O₂ ratio in feed.     

间歇式液相本体聚丙烯装置计算机控制与管理系统

介绍一种间歇式液相本体聚丙烯装置计算机先进控制与管理系统。它是由“基本控制层”和“上位控制层”构成的经济适用型集散控制装置。该装置采用了多屏显示技术、网络通讯技术、PLC程控技术、ActiveX控件技术和面向对象程序设计方法、数据库技术以及闭环辩识、预测控制、反应优化、底层PID控制与上层先进控制无扰动自动切换等多种技术和控制方式，因而可以灵活有效地实现聚合反应的全过程自动化生产和安全保护。     

Quantitative measurement of gas hold-up distribution in a stirred chemical reactor using X-ray cone-beam computed tomography

Cone-beam type X-ray computed tomography (CBCT) is a potential method to measure three-dimensional phase distributions in vessels. An example for that is the measurement of gas profiles in stirred chemical reactors. Such data are highly valuable for the assessment and evaluation of chemical processes, for optimisation of the reactor and stirrer design, and for evaluation of computational fluid dynamics codes used to model the fluid flow and heat transfer in reactive systems. However, there are considerable difficulties for accurate quantitative measurements due to beam hardening and radiation scattering effects. In a theoretical and experimental work we have investigated the non-linear effects of both physical phenomena and developed a suitable measurement setup as well as calibration and software correction methods to achieve a highly accurate measurement of void fraction profiles with CBCT.     

乙烯裂解炉内传递和反应过程综合数值模拟Ⅱ.反应管内传递和反应过程的数值模拟

采用乙烯裂解炉传递反应过程综合数学模型中的反应管数学模型，对工业裂解炉反应管进行了系统的数值模拟，得到了反应管内流场、温度场和浓度场的详细信息，揭示了反应管内流动、传热、传质和裂解反应的基本特点。模拟结果表明，沿反应管轴向油气吸热升温，裂解反应加剧，产物产率逐渐发生变化；沿反应管径向存在明显的流体流速和温度的变化，而产物产率的变化不如流体流速和温度的变化明显。通过比较湍流粘度和分子粘度的大小，认为29．975～30mm的径向区域为层流层，层流层的存在使得临近管壁的区域内流体流速和温度变化显著。     

Adaptation of the microscopic properties of redox catalysts to the type of gas-solid reactor

Catalysts of selective oxidation usually work in a simultaneous redox mode in reactant/air cofed reactors. The solid must provide selective lattice oxygen according to a kinetic mechanism depending on operating conditions that differ from one reactor to another. Better catalytic performance can be obtained in a recirculating solids reactor because it allows separate optimization of the reduction and oxidation steps. Among the microscopic properties of the catalyst, the crystal morphology is to be taken into account because it influences its reactivity on stream. These considerations lead to a new approach of the catalyst-reaction-reactor trio.     

液态金属钠高温沸腾实验回路应力分析与强度计算

本文主要完成了液态金属钠高温沸腾实验回路的应力分析与计算，确定了回路高温区连接管系的布置型式和支吊架系统，是该回路总体设计的重要组成部分。     

膜催化氧化正丁烷制顺酐

以多孔玻璃管为基体，制备４种用于正丁烷氧化制顺酐的膜反应器。在一定的操作条件下，考察了固定床反应器与这４种膜反应器在正丁烷氧化制顺酐中的反应性能并加以比较，发现ＹＳＺ膜反应器可获得高于固定床反应器的选择性和收率。     

新型废水厌氧处理工艺——内循环厌氧反应器

介绍内循环(IC)厌氧反应器的发展、基本结构、运行机理。分析该反应器的工艺过程,指出该工艺具有处理效率高、抗冲击能力强等优点。针对IC反应器存在的缺陷,人们对该反应器进行技术改进:通过提高它的内循环的气量进行处理低浓度有机废水;增加外循环装置缩短IC反应器的启动周期。     

Optimal Conditions for Preparing Ultra-Fine CeO2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor (SCISR) from Ce(NO3)3·6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide (CeO2) powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce(NO3)3 and NH4HCO3 solutions were 0.25 and 0.3 mol·L-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g·L-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r·min-1, 80 ℃, 20 min, 5～6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8～2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point group was O5H-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor (STR).     

Kinetics of phenol oxidation in a trickle bed reactor over active carbon catalyst

The wet air oxidation of phenol over a commercial active carbon catalyst was studied in a trickle bed reactor (TBR) in the temperature and oxygen partial pressure ranges of 120–160 °C and 0.1–0.2 MPa, respectively. The performance of the active carbon was compared in terms of phenol and COD destruction. The weight change of active carbon due to reaction was also measured. Finally, oxic phenol adsorption isotherms were assessed in batch conditions at 25, 125 and 160 °C. In order to use the conversion data obtained from the TBR for a kinetic study, special care was taken to check the kinetic control in the TBR experiments. Several kinetic models including power law or Langmuir–Hinshelwood expressions were considered to describe the catalytic oxidation of phenol over active carbon. The simple power law model with first order dependence on both phenol and oxygen concentration predicted satisfactorily the experimental data not only over the entire range of operating conditions studied, but also outside its validity range. Copyright © 2005 Society of Chemical Industry