铜金粉的颜色及其影响因素

利用分光光度计对国内外铜金粉的颜色进行了测试，研究了铜金粉的成分、微观状态对颜色的影响。结果表明：铜金粉颜色可以用色彩三要素进行描述，其中铜金粉的色相只与合金成分有关，而与铜金粉片的大小、形状及粒度分布无关；明度和纯度与铜金粉片在油墨层中定向排列状态、片的大小、形状及粒度分布有关，而与成分无关；合金成分的微小波动不会引起铜金粉色相的明显改变。     

碾压混凝土中石粉含量精确控制研究与应用

通过在碾压混凝土中掺入工业化粉磨加工的石粉代替部分砂,使砂中石粉总含量满足碾压混凝土的要求,从而改善碾压混凝土的性能,保证其质量.从不同石粉含量的碾压棍凝土试验研究结果分析,以及金安桥水电站大坝碾压混凝土施工质量控制结果分析可知,混凝土生产时必须对外掺石粉量进行精确控制,确保掺入代砂石粉后石粉总量不变,才能确保碾压混凝土的质量稳定.     

小型钨丝电热原子吸收光谱仪的电源

随着对分析仪器的小型化、便携式需求的提高,钨丝电热原子吸收光谱仪在便携式分析仪器方面显示了很大的潜力.为进一步满足现场分析的需要,以单片机为芯片,为小型钨丝电热原子吸收光谱仪的空心阴极灯和钨丝电热原子化器设计稳定的一体化恒流电源;并编写PC机的控制软件,以USB或RS232方式与电源通信,方便控制空心阴极灯和钨丝电热原子化器电流,以及原子吸收过程.以此电路设计的小型钨丝电热原子吸收光谱仪对镉、铅、金和银的标准溶液测试结果为:检出限分别为(0.1,6.0,5.0,0.6)μg/L,相对标准偏差分别为8.2%,5.3%,6.0%和7.2%.测试结果表明:电源很稳定,达到了文献报道的钨丝电热原子吸收光谱的分析性能.     

Small Changes,Big Impact: Tungsten Bronzes with Extremely Large Second Harmonic Generation Achieved by the Transition Metal Doping on the B-Site

Two novel transition metal-doped tungsten bronze oxides, Pb_2.15Li_0.85Nb_4.85Ti_0.15O₁₅ (PLNT) and Pb_2.15Li_0.55Nb_4.85W_0.15O₁₅ (PLNW), are synthesized by high-temperature solid-state reactions. The Rietveld method using the high-resolution synchrotron radiation indicates that PLNT and PLNW crystallize in the orthorhombic polar noncentrosymmetric space group, Pmn2₁ (no. 31). As a class of tungsten bronze oxide, PLNT and PLNW retain a unique rigid framework composed of d⁰ transition metal cation (Ti⁴⁺ or W⁶⁺)-doped highly distorted NbO₆ octahedra along with the subsequently generated Pb/LiO₁₂ and PbO₁₅ polyhedra. Interestingly, the d⁰ transition metal-doped tungsten bronzes, PLNT and PLNW, exhibit extremely large second-harmonic generation (SHG) responses of 56 and 67 × KH₂PO₄, respectively. The observed immeasurably strong SHG is mainly attributed to a net polarization originating from the alignment of highly distorted NbO₆ octahedra with doped transition metals in the frameworks. It is believed that doping transition metal cations at the B-site of the tungsten bronze structures should be an innovative strategy to develop novel high-performance nonlinear optical materials.     

Mechanical activation-assisted electro-thermal explosion synthesis of the Ti2AlC phase

This study deals with the synthesis of the Ti₂AlC phase using the Electro-Thermal Explosion under Pressure with Confinement (ETEPC) technique. The effects of the ETEPC technique and the milling process parameters on the TiC_x phase content and the formation mechanism of the Ti₂AlC phase were investigated. The latter is mainly affected by the morphology of the powder mixture and aluminum melted amount. The optimization of the above parameters allowed the achievement of the desired reaction, leading to the formation of the Ti₂AlC phase with a purity of about 97?wt%. The results clearly demonstrate that the ETEPC process enables one to control both time and material synthesis temperature.     

Characterization and humidity sensing properties of Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3 powder synthesized by metal-organic decomposition

Bi_0.5Na_0.5TiO₃-Bi_0.5K_0.5TiO₃ (BNT-BKT) powder is synthesized by a metal-organic decomposition method and characterized by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). A humidity sensor, which is consisted of five pairs of Ag-Pd interdigitated electrodes and an Al₂O₃ ceramic substrate, is fabricated by spin-coating the BNT-BKT powder on the substrate. Good humidity sensing properties such as high response value, short response and recovery times, and small hysteresis are observed in the sensing measurement. The impedance changes more than four orders of magnitude within the whole humidity range from 11% to 95% relative humidity (RH) at 100 Hz. The response time and recovery time are about 20 and 60 s, respectively. The maximum hysteresis is around 4% RH. The results indicate that BNT-BKT powder is of potential applications for fabricating high performance humidity sensors.     

基于Cosserat连续体理论的疲劳寿命概率可靠性分析

基于Cosserat连续体理论建立考虑应变梯度效应的粉末高温合金弹塑性模型.该模型考虑微尺度长度效应,并能消除缺陷局部化问题求解时的网格依赖性.基于参变量变分原理提出一种高效的求解方法,该方法将原非线性问题转化为互补问题求解,可大大提高求解效率和收敛性.针对一种假想涡轮盘模型,将Cosserat尺度参数和Basquin斜率作为随机变量,分别采用蒙特卡洛法与二阶矩法进行疲劳寿命概率可靠度计算.结果表明二阶矩法在保证精度的情况下具有较高的效率.     

Effect of polycarboxylate-type superplasticizer on the paste fluidity based on the water film thickness of flocs

The excess water film theory and the properties of flocs are integrated to examine the effect of the polycarboxylate-type superplasticizer on the paste fluidity.The theory states that excess water can surround the flocs rather than the particles and that the cell consists of a floc and a superficial water film.Experiments on limestone powder pastes were conducted to verify the theory.The superplasticizer dosage(sp%)and the water–powder ratio by volume(Vw/Vp)were systematically varied.A sedimentation balance method was used to measure the size distribution of the flocs in the limestone powder pastes.The water film thickness(WFT)of flocs was then calculated and shown to determine the paste fluidity.Based on this WFT of flocs,the effect of the sp on the paste fluidity was determined and then compared with the effect of water.