Irradiation of large area Mylar membrane and characterization of nuclear track filter

Ion irradiation of Si⁸⁺ ion beam of 100 MeV was scattered by a gold foil on a Mylar membrane of 25 Μm thickness in the form of film roll (width, 12.5 cm and length, 400 cm) at the Nuclear Science Centre, New Delhi. The characterization of etched nuclear tracks was carried out by gas permeation measurements. The samples cut from the film roll of required size for permeability measurements were etched in a controlled manner in a constant temperature bath of 6N NaOH solution. The opening of the conical etched tracks was characterized by hydrogen gas permeation.     

Formation of ordered microporous films with water as templates from poly(D,L‐lactic‐co‐glycolic acid) solution

Recently a method that uses water droplets at the air–solution interface as an ordered template was reported for the preparation of ordered micrometer‐size honeycomb structures. Here we show that the method can also be used for formation of honeycomb‐like porous films from random copolymers with certain hydrophilicity, besides those polymers with defined structures such as block copolymers, starlike homopolymers, amd amphiphilic polymers. This demonstrates that the stabilization of water droplets is the key factor for the regular structure. Also we indicate that size and structure of the films can be regulated by such variables as concentration and atmospheric humidity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1846–1850, 2003     

Research and application of automatic control system of argon blowing at ladle shroud

Argon blowing at the ladle shroud requires the best flow control strategy to effectively avoid the secondary oxidation of molten steel, slag entrapment and heat loss during the casting of the tundish, and at the same time, give full play to the role of bubbles to remove inclusions. Therefore, an automatic control system for argon blowing at the ladle shroud was proposed. The data collected by S7-300PLC and software programming were used to adjust the argon blowing flow online in real time according to factors such as pouring and continuous pouring. On this basis, PID control algorithm and closed loop control mechanism were used for real time adjustment. The flow control valve ensures theminimum deviation between the actual value of the flow and the set value. The production data of this system in the first quarter of 2021 in a special steel plant show that the proportion of furnaces with an acid soluble aluminum (Als) loss percentage of less than 10% of each steel grade has increased by 5.52%, and the proportion of furnaces with an Als loss percentage of more than 60% has increased from 1% decrease to 0. The actual application results show that the use of the system improves the surface quality of the continuous casting slab and the performance of the final product.     

加固改造中的结构承重体系转换

从加固改造工程的实践出发 ,探讨了混合结构向框架结构体系转换的方法和构造措施 ,为实际工程提供了新的技术思路     

RAID技术综述

通过对各种RAID级别的实现原理进行描述，综合分析了各种模式的性能、优缺点以及应用范围。     

电磁铸造液柱高度数学模型的建立及应用

为了研究熔体金属电磁立柱成形能力并计算电磁作用下的液注高度,从电磁铸造立柱成形的基本原理出发,建立了电磁场作用下金属立柱成形时液柱高度数学模型,并试验验证了模型的准确性.利用液柱高度数学模型对铝、钢、锡铅合金等金属的电磁铸造可行性,以及电力参数对液柱高度的影响进行研究.结果表明:铝电磁无模成形能力最强,而钢及锡铅合金电磁无模成形能力则基本相同;钢及锡铅合金电磁立柱成形所需的磁感强度约为0.08～0.10 T,而铝则只需约0.04T.     

稀土Pr对Al2O3-SiO2(Sf)/ZL109复合材料组织及性能的影响

本文采用挤压浸渗法 ,制得不同稀土含量的硅酸铝短纤维增强铝基复合材料。用光学显微镜观察了复合材料的铸造显微组织 ,分析了稀土含量对共晶硅组织形态的影响 ;用扫描电镜对复合材料基体中的稀土相进行了观察 ,探索了稀土相的分布位置及其形态 ;并对不同稀土含量的复合材料进行了摩擦磨损实验 ,结果表明稀土能增强复合材料的耐磨性     

离心浇铸法制备光谱控制样的分析研究

本文研究了应用高频熔化、冶炼、离心浇铸成型新技术,制备光谱控制样的方法及可行性,研究证明,利用本方法制备出的光谱控制样表面光洁度高,均匀性好,且组织结构和基体成份与分析试样一致,可用于光谱分析中工作曲线的校准和质量控制.     

Rendering of Surface and Volume Details in Volume Data*

Aiming at the detail rendering in volume data, a new volume illumination model, called Composed Scattering Model (CSM), is presented. In order to enhance different details in volume data, scattering intensity is decomposed into volume scattering intensity and surface scattering intensity with different weight functions. According to the Gauss probability distribution of gray and gradient of data, we propose an accurate method to detect the materials in a voxel, called composed segmentation. In addition, we discuss the principle of constructing these weight functions based on the operators defined in composed segmentation. CSM can generate images containing more details than most popular volume rendering models. This model has been applied to the direct volume rendering of 3D data sets obtained by CT and MRI. The resultant images show not only rich details but also clear boundary surfaces. CSM is demonstrated as an accurate volume rendering model suited for detail enhancement in volume data sets.     

孔径法测量铜带残余应力的试验研究

介绍了用于薄板残余应力测量的新方法——孔径法,该方法是通过测量冲孔直径的变化来间接求出各方向的残余应力;文中详细阐述了残余应力的标定方法;由于可针对不同材料建立了被测材料的平均应力(σ_l)与被测板材宽度(B)、厚度(H)以及冲孔后直径变化率(△D_i/D)之间的数学模型,因而使薄板残余应力测量变得简便而经济;此外还对该方法的分辨率与测量精度进行了实验、计算与分析。