Time Characterization of High Density Gas Jet from a Pulsed Supersonic Nozzle via Laser Produced Plasma

A high-density gas jet supersonic nozzle is reported in this paper. The jitter and actuation time of the nozzle is determined by the pin discharge and laser spark radiation respectively. The jitter time of the nozzle is within 10μs with the backing pressure as high as 25 bar. With a nanosecond laser pulse focused on the gas jet about 1 mm below the nozzle, the actuation time is calculated to be about 15 ms by detecting the laser produced spark radiation, which reveals the existence of the gas jet and the relative gas density evolving with time. Consequently the gas density is estimated to be well above 10^19 cm^-3, compared with theoretical simulations from the nozzle parameters.     

Ready, Set, Go! The Voronoi diagram of moving points that start from a line

It is an outstanding open problem of computational geometry to prove a near-quadratic upper bound on the number of combinatorial changes in the Voronoi diagram of points moving at a common constant speed along linear trajectories in the plane. In this note we observe that this quantity is Θ(n²) if the points start their movement from a common line.     

Extension of a combined analytical/numerical initial value problem solver for turbulent mixing with combustion

Here, we describe the development of a reacting flow multi-species/combustion methodology, implemented as an extension to the differential reduced ejector analysis (DREA) computer program [Mathematical and computer modeling, vol. 31, 2000, p. 21; Appl. Math. Model. 25 (2001) 427; Comput. Math. Appl. 43(10–11); NASA Contractor Report, 1998]. Use of the single fluid IVP solver framework that was developed for the original DREA model has been directly coupled into the combustion formulation. With these modifications, the analysis has an elementary single step reaction Fuel+Oxidizer→Product combustion capability. Though approximate in nature, the simplicity and efficiency of the DREA formulation make it suitable for its original niche, namely design and preliminary design environments where more complex and expensive models may be inappropriate.     

关于解决黄牛鞋面革松面问题的探讨

本文讨论了在黄牛鞋面革生产过程中产生松面的原因，并经过多年的生产实践，摸索出解决松面问题行之有效的技术措施。     

L~∞（0，1）上一个WeakL~P（0，1）有关的格半范数

本文引进一个定义在Ｌ~∞（０，１）上格半范数ρｐ与一个熟知的格半范数ρ０关系，证明了在Ｌ~∞（０，１）中的序区间上，ρ０－拓扑与ρｐ－拓扑等价，从而证明了（Ｌ~∞（０，１），ρｐ）′的闭单位球是（Ｌ~∞（０，１），ρｐ）′的某个子集的弱－闭包，本文还证明了（Ｌ~∞（０，１），ρｐ）′可看作ＷｅａｋＬｐ（０，１）对偶空间的奇异部一个理想，而且这奇异部可由（Ｌ~∞（０，１），ρｐ）′与一算子族生成．（ｆ）ａｌｌ（ｌ．＼ｎ，ｏｏ（ｊ．）＝ｈｉｌｌｓｉｌｌ）ｔ￣．，ｉｆｆ￣＊（ｔ）ｒｅｓｐｅｃｔｉｖｅｌｙａｌｌ＇ｌ，Ｌ（ｑ，１）ｉｓｔｈｅｐｒｅｄｌｓｌａｌｏｆｔｙｒｅａｋＬＩ＇，ａｌｌｌｌｈ，ｒｌｌｏｌｌ－－ａｔ（，ｌｌｌｉ（＇ｌｌｌｅａｓｌｌｒｅａｌｇａ（ｌ￣ｓ，ａｒｅｐｒｅｓｅｌｌｔａ＇ｔｉｏｌｌｔｌｌｅｏｒｅｎｌｆｆ，ｒｅｌｅｌｌｌｅｌｌｔｓｉｌｌＳａｃ，ａｌｌ（ｌＳ，，．ｉｓｏｆ）ｔａｉｌｌｅ（ｌ．Ｈｏｗｅｖｅｒ，ｉｌｌ［２］，ｉｔｉｓｓｌｌｄｗｎｔｈａｔｔｉｌｅｒｅｐｒｅｓｅｌｌｔａｔｉｏｌｌｔｉｌｅｓｆ）ｒｅｌｌｌｏｆ）ｔａｉｌｌｅ（ｌｉｌｌ［．５］ｉｓｉｌｌ（ｔｏｒｒｅ（？ｔ．Ｉｎｔｈｉｓｎｏｔｅ，ｗｅｄｅ     

磨料高压水除鳞系统设计研究

磨料高压水除鳞系统取代酸洗线，原机械部分和磨料高压水部分都作了较大改进，才能保证除鳞彻底。     

自振空化射流提高钻井速度的实验研究

空化射流用于提高钻井速度的可行性研究结果表明，在钻进作业中，利用空泡破裂产生强大破坏作用来提高钻探的效率，其效果显著，可行性高。室内实验表明，自振空化射流在比普通喷嘴射流更深的井底或更高的围压条件下，有更大的起始空化数和更强的空化能力。自振空化喷嘴起始空化数大都在1.0以上，最高达到1.67，而锥形喷嘴最高仅为0.43，围压下其冲蚀效率是锥形喷嘴的1~2倍。现场试验同样证实设计的自振空化射流喷嘴在保护钻头、减少钻头磨损及增加进尺、提高机械钻速方面有显著作用。     

浸入式水口MgAlON质内衬材料的抗Al2O3附着性研究

浸入式水口在连铸过程中，特别是多炉连铸铝镇静钢时，由于Al2O3在水口内壁附着引起堵塞问题。研究了无碳无二氧化硅的MgAlON质耐火材料，考察了MgAlON—Al2TiO5、MgAlON—BN、Al2O3-C、CaO-ZrO2-C材料的抗Al2O3附着性。结果表明，MgAlON-AT复合材料的抗舢203附着性和抗钢水侵蚀性均优于其它材料．     

光电摆角动态测量原理及其测量系统

本文阐述了用于测量物体摆角及摆心浮动量的光电动态实时测量原理,以及根据此原理研制的光电导弹喷管摆角动态测量系统。     

疏松砂岩地层出砂对套管损坏的研究

以东濮凹陷文明寨油田历年井况调查的套管损坏资料为依据，在对出砂油井套管损坏形态、层位与射孔状况、岩石性质等因素进行综合分析基础上，对疏松砂岩出砂、上覆岩层坍塌等主要方面导致的套管受力变形进行研究，为探讨防治措施提供依据。