铝锆炭滑板在浇铸钙处理钢时的化学侵蚀

利用扫描电镜对抗钙处理钢液侵蚀试验后的铝锆炭残样进行了显微结构观察 ,并分析了铝锆炭滑板在钙处理钢液中的化学侵蚀机理。结果表明 :高温下 ,钙处理钢液中的Ca及CaO会与滑板中的Al2 O3 、SiO2 发生反应 ,生成低熔点的 12CaO·7SiO2 (1392℃ )和 2CaO·SiO2 ·Al2 O3 (15 39℃ )等物质 ,这些低熔物被钢水冲刷掉 ,使得滑板表层的Al2O3 和SiO2 含量迅速降低 ,从而导致了滑板的损毁。     

喷雾低水熄焦技术在济钢的应用

采用喷雾低水熄焦技术对原熄焦系统进行了改造,解决了喷嘴堵塞及喷淋效果不好等问题。熄焦时间缩短了50～80s,用水量减少了20%～40%,焦炭水分降低了1%。同时,还稳定了高炉操作,使焦比降低了1.2%。     

Research on the Control Strategy of Variable Nozzle Turbocharger for Natural Gas Engine

A variable nozzle turbocharger (VNT) was applied to a 2.2-liter L4 natural gas engine,and a VNT control system was designed to operate it.Based on VNT matching test results,a VNT control strategy was studied,in which VNT adjustment is carried out through pre-calibrated VNT handling rod position,combined with a closed-loop target boost pressure feedback using proportional-integral-derivative(PID) algorithm.Experimental results showed that the VNT control system presented in this thesis can lead to optimized ...     

2n阶常微分方程边界问题解的存在性

本文运用上下解的方法,对方程中某些项的条件放宽的情况下,给出了一类2n阶常微分方程边界问题解的存在性定理.     

体内张拉成形空间网格结构上弦环梁对结构内力影响分析

体内张拉成形空间网格结构是由上弦、下弦、腹杆和侧向连接构件组成,上弦环梁作为体内张拉成形空间网格结构中心的一个重要承荷部分,各个张拉单元与整体张拉成形方案不同,在结构成形结束时,其内力由于批次的不同而必然会产生一定的超前或滞后,采用适当加强的上弦环梁纽带作用,会在一定程度上减弱这种结构内力的不均匀性,本文从结构的实际应用出发,对上弦环梁对结构内力的影响作了较为详尽的分析.     

Characteristics of shell thickness in a slab continuous casting mold

The key to reduce shell breakout in the continuous casting process is to control shell thickness in the mold.A numerical simulation on the turbulent flow and heat transfer coupled with solidification in the slab mold using the volume of fluid (VOF) model and the enthalpy-porosity scheme was conducted and the emphasis was put upon the flow effect on the shell thickness profiles in longitudinal and transverse directions.The results show that the jet acts a stronger impingement on the shell of narrow face,which causes a zero-increase of shell thickness in a certain range near the impingement point.The thinnest shell on the slab cross-section locates primarily in the center of the narrow face,and secondly near the comer of the wide face.Nozzle optimization can obviously increase the shell thickness and make it more uniform.     

An evaluation of deep thin coal seams and water-beating/resisting layers in the quaternary system using seismic inversion

Non-liner wave equation inversion, wavelet analysis and artificial neural networks were used to obtain stratum parame-ters and the distribution of thin coal seams. The lithology of the water-bearing/resisting layer in the Quaternary system was also predicted. The implementation process included calculating the well log parameters, stratum contrasting the seismic data and the well logs, and extracting, studying and predicting seismic attributes. Seismic inversion parameters, including the layer velocity and wave impedance, were calculated and effectively used for prediction and analysis. Prior knowledge and seismic interpretation were used to remedy a dearth of seismic data during the inversion procedure. This enhanced the stability of the inversion method. Non-linear seismic inversion and artificial neural networks were used to interpret coal seismic lithology and to study the wa-ter-bearing/resisting layer in the Quaternary system. Interpretation of the 1-2 m thin coal seams, and also of the wa-ter-bearing/resisting layer in the Quaternary system, is provided. The upper mining limit can be lifted from 60 m to 45 m. The pre-dictions show that this method can provide reliable data useful for thin coal seam exploitation and for lifting the upper mining limit, which is one of the principles of green mining.     

KKM映射和KKM型定理及其相关结果

简要介绍古典的KKM映射的演变过程和KKM理论的发展历史,并给出利用KKM型定理得到的最近的一些重要研究成果,以进一步了解和掌握并研究KKM理论．     

一类二阶边值问题反对称变号解的存在唯一性

研究了一类二阶边值问题反对称变号解的存在唯一性,利用上下解方法、单调迭代方法及解的延拓技巧研究一类非线性二阶边值问题,得到了该问题反对称变号解的存在唯一性定理,应用该定理说明了一个具体的二阶边值问题具有唯一反对称变号解。     

蓝宝石光纤温度传感器测温上限的瓶颈分析及解决方案

通过与热电偶、非接触式辐射测温仪的对比分析,指出基于黑体辐射原理的蓝宝石光纤温度传感器在某些特殊测温场合的不可替代性.介绍了国内蓝宝石光纤温度传感器的研究情况,分析制约其应用和发展的测温上限瓶颈,最后提出解决该问题的初步方案.实验证明该方案能够实现高达2 700℃的温度测量,1 000℃以上最大稳态误差不超过50℃.