科研项目管理信息系统的设计

介绍了用自顶向下的结构化方法进行科研项目管理信息系统设计的过程。该系统的应用节省了大量人力、物力和财力,提高了企业科研项目管理水平。     

A simplified method for modelling the effect of blinds on window thermal performance

An approximate method is presented for predicting the effect of a louvered blind on the centre‐glass thermal performance of a fenestration. The method combines a one‐dimensional heat transfer model with data from a numerical simulation of the window and blind. Sample results for a blind mounted on the indoor surface of a window show the effect of blind slat angle on heat transmission. Both summer and winter conditions are considered. The results show that a louvered blind can improve the U‐value of a standard double‐glazed window by up to 37%. Also, the radiation heat exchange with the room can be dramatically reduced (by up to 60%), which will improve the level of occupant comfort. However, there was found to be a trade‐off between U‐value and occupant comfort; placing the blind closer to the window improves the U‐value, but increases the radiation heat exchange with the room. The predictions from the present simplified method compare well with results from a full two‐dimensional computational fluid dynamics solution of the conjugate blind/window interaction. Copyright © 2005 John Wiley & Sons, Ltd.     

Periodic surface modeling for computer aided nano design

Current solid and surface modeling methods based on Euclidean geometry in traditional computer aided design are not efficient in constructing a large number of atoms and particles. In this paper, we propose a periodic surface model for computer aided nano design such that geometry of atoms and molecules can be constructed parametrically. At the molecular scale, periodicity of the model allows thousands of particles to be built efficiently. At the meso scale, inherent porosity of the model represents natural morphology of polymer and macromolecule. Surface and volume operations are defined to support crystal and molecular model creation with loci and foci periodic surfaces. The ultimate goal is to enable computer assisted material and system design at atomic, molecular, and meso scales.     

错金工艺及对其运用的探讨

为了继承和发扬错金工艺，从其定义出发，探讨了该工艺在中国古代及国外的发展与应用以及笔者对该工艺的实验研究。针对在错金工艺实践过程中出现的问题，在查阅了相关的资料后，对传统错金工艺的实现方法提出了质疑。     

轮式工程机械轮边减速器优化模型与方法

论述了重构轮式工程机械轮边减速器优化设计数学模型的必要性,给出了精确化的目标函数,全面化和准确化的设计变量、基于并行设计的约束条件;介绍了对优化解适用性评价的方法和手段。巧妙地解决了优化解中离散变量的圆整问题,提供了基于MATLAB的求解反渐开线函数的M文件。     

正交实验优选盐生藻多糖的提取工艺

以盐生藻为原料,盐生藻多糖得率为指标,运用稀酸、稀碱和蒸馏水为提取剂提取盐生藻多糖,得出合适的提取剂为稀酸.进一步的正交实验表明,盐生藻多糖的最适提取工艺为:提取75min,pH=4,固液比为1∶70,温度为95℃.     

Lactic acid production from dining‐hall food waste by Lactobacillus plantarum using response surface methodology

BACKGROUND: Food waste generally has a high starch content and is rich in nutritional compounds, including lipids and proteins. It therefore represents a potential renewable resource. In this study, dining‐hall food waste was used as a substrate for lactic acid production, and response surface methodology was employed to optimise the fermentation conditions. RESULTS: Lactic acid biosynthesis was significantly affected by the interaction of protease and temperature. Protease, temperature and CaCO₃ had significant linear effects on lactic acid production, while α‐amylase and yeast extract had insignificant effects. The optimal conditions were found to be an α‐amylase activity of 13.86 U g^?1 dried food waste, a protease activity of 2.12 U g^?1 dried food waste, a temperature of 29.31 °C and a CaCO₃ concentration of 62.67 g L^?1, which resulted in a maximum lactic acid concentration of 98.51 g L^?1 (88.75% yield). An increase in inoculum size would be appropriate for accelerating the depletion of initial soluble carbohydrate to enhance the efficiency of α‐amylase in dining‐hall food waste fermentation. CONCLUSION: A suitable regression model for lactic acid production was developed based on the experimental results. Dining‐hall food waste was found to be a good substrate for lactic acid fermentation with high product yield and without nutrient supplementation. Copyright © 2008 Society of Chemical Industry     

Effect of spray nozzle design on liquid-solid contact in fluidized beds

In industrial fluid cokers the feedstock, consisting of heavy bituminous hydrocarbons, is atomized with steam and injected into a hot fluidized bed of coke. Good and uniform contact of the liquid droplets with the solid particles is required to provide heat for the cracking reactions while minimizing mass transfer effects. Experiments in a pilot plant coker have suggested that the initial particle/liquid mixing, in the spray jet, is rather poor. Experiments in a X-ray scanner showed that liquid droplets and entrained particles accumulate just below the tip of the jet plume to form agglomerates.An experimental technique was used to quantitatively determine the quality of mixing with a variety of nozzle configurations including several novel designs. By improving spray stability, redistributing liquid droplets to the solids-rich region of the jet and increasing the surface area of the gas-liquid jet-fluidized bed interface, liquid/solid contact is improved.     

Stretchable Gold Tracks on Flat Polydimethylsiloxane (PDMS) Rubber Substrate

A process to fabricate stretchable gold tracks on silicone rubber substrates is studied by XPS, static water contact angle measurement, AFM, and SEM. The process involves several steps: removing uncured oligomers by hexane Soxhlet extraction; pre-stretching the substrate; activating the strained silicone surface by an oxygen plasma treatment; coating the strained substrate with 5 nm titanium and 80 nm gold layers; and finally releasing the sample. The plasma treatment creates a thin brittle silica-like layer that temporarily increases the substrate's surface energy. Indeed, the plasma treatment is followed by a hydrophobic recovery. As a consequence, the delay between plasma treatment and metal deposition has to be reduced as much as possible. The silica-like layer can be nicely observed after release. The entire process allows us to obtain stretchable metallized samples that remain conductive even after an excessive deformation leading to electrical failure.     

Influence of electroosmotic treatment on the hydro-mechanical behaviour of clayey silts: preliminary experimental results

Preliminary results of an investigation focused on the influence of electrokinetic treatment on the mechanical and hydraulic behaviour of clayey soils are presented. The experimental programme aims at providing a contribution to the sustainability of contaminant extraction or containment via electroosmosis. Changes in the hydraulic and mechanical properties of two illitic clayey soils, subjected to a DC electric field, were investigated. Samples of the two soils were subjected to electrokinetic filtration, for different periods of time, and under different constant loads. Afterwards, they were tested under one-dimensional compression to detect changes in stiffness and hydraulic conductivity due to the electrical treatment. After the application of a DC field for a few hours, a small reversible increment in the average soil stiffness was observed, with respect to the untreated soil, while the hydraulic conductivity was not affected substantially. Dramatic changes of the mechanical and hydraulic soil properties, correlated to changes of the soil pH, were observed following non-conditioned electrokinetic treatment with duration of the order of days.