Leaching kinetics of Cs and Co radionuclides fixed in cement and cement-based materials

Leach characteristics of ¹³⁷Cs and ⁶⁰Co radionuclides from both ordinary Portland cement and cement mixed with two different ratios of silica fume and ilmenite have been studied using International Atomic Energy's (IAEA) standard leach method. A mathematical model has been simulated to predict the release rate of each nuclide from cubic geometry waste matrix and the predicted values are discussed in relation to experimentally observed leach rates to confirm the validity of the proposed mechanism in the model. The effect of temperature on the radionuclides leaching rates was also studied and the effective diffusion coefficients were obtained at different temperatures. The net fractional release of the two radionuclides from different waste forms showed a decreasing pattern as ¹³⁷Cs>⁶⁰Co, indicating the largest diffusion coefficient for cesium in all waste matrices.     

用于疏通油水井的脉冲放电技术

评价了各种不同的解堵技术，指出冲击波解堵是一种很有发展前途的技术。介绍了液中脉冲放电产生冲击波的基本原理，并由此研制出了一套井下脉冲放电油水井处理设备样机。通过现场试验，表明用冲击波疏通油井能较好地解除油井污染，提高采收率。     

紧凑 Tokamak(球形环)聚变堆第一壁及中心导体柱上中子负荷及核热计算与分析

采用通用蒙特卡罗粒子输运程序ＭＣＮＰ／３８计算低环径比Ｔｏｋａｍａｋ（紧凑环或球形环）聚变堆第一壁及中心导体上的中子壁负荷分布和核热沉积分布，并与常规Ｔｏｋａｍａｋ堆第一壁上中子壁负荷分布和核热沉积分布进行比较、分析。结果表明，在中子壁负荷归一化为１ＭＷ／ｍ２时，与常规Ｔｏｋａｍａｋ相比，在低环径比Ｔｏｋａｍａｋ堆第一壁及中心柱表面上中子壁负荷分布峰值并不比常规Ｔｏｋａｍａｋ堆第一壁上的峰值高，而且低于低环径比Ｔｏｋａｍａｋ堆整个第一壁上的平均值，而中心柱上的核热沉积峰值稍高于常规Ｔｏｋａｍａｋ堆第一壁上的核热沉积峰值，但对较高中子壁负荷情况，中心导体柱上的核热沉积和辐照损伤仍可能是比较严重和值得特别研究的问题。     

浅谈胶条接头与模具设计

简要地介绍了橡胶条常见接头工艺方法、应用特点及模具结构与设计方法。     

催化重整装置的几点设计改进

以一套500kt/a规模的催化重整装置的设计为例进行分析和讨论，提出对今后催化重整装置设计的几点改进建议，包括原料的加氢预处理流程，提纯重整产氢，优化预分馏塔及稳定塔的塔盘层数，选择合适的预加氢进料换热器及甲苯塔、二甲苯塔的加压操作等。     

饭店的绿色建筑设计初探

事实上，许多饭店存在的许多环境问题都是由于饭店的“先天不足”造成的。因此，饭店绿色建筑设计是创建绿色饭店的根本环节。文章对绿色建筑设计的基本原则和内容作了初步的探讨。     

“勇士号”遥控移动式作业机器人

介绍了８６３智能机器人型号之一－以核工业为应用背景的“勇士号”遥控移动式机器人的作业内容及其主要功能指标，分析了该型号的总体设计思想，同时概括总结了其操作性能，移动性能及计算机系统等方面的技术特点。     

An efficient controller structure with minimum roundoff noise gain

Based on a polynomial operator approach, a new sparse controller structure is derived, which is actually an improved version of the recently proposed structure [Li, G. (2004). A polynomial-operator-based DFIIt structure for IIR filters. IEEE Transactions on Circuits and Systems II, 51, 147-151]. The performance of the proposed structure is analyzed by deriving the corresponding expression of roundoff noise gain and the problem of finding optimized sparse structures is solved efficiently with a genetic algorithm (GA). A numerical example is given, which shows that the newly developed structure can achieve much better performance than some well-known structures and particularly outperforms the traditional optimal fully parametrized realization greatly in terms of reducing roundoff noise and implementation complexity.     

利用光纤数字同步传送网2.048 Mbit/s支路传送高精度标准时间信号

首次提出一种利用光同步数字传送网的2.048Mbit/s信号传送高精度时间编码信号的方法和实验结果。它可以使整个通信网的交换机、计费系统、网管系统、基站控制器等设备实现与UTC的时间同步。目前的实验证明,时间同步的不确定度优于±5μs。     

Explosive Random‐Coefficient AR(1) Processes and Related Asymptotics for Least‐Squares Estimation

Abstract. Large sample properties of the least‐squares and weighted least‐squares estimates of the autoregressive parameter of the explosive random‐coefficient AR(1) process are discussed. It is shown that, contrary to the standard AR(1) case, the least‐squares estimator is inconsistent whereas the weighted least‐squares estimator is consistent and asymptotically normal even when the error process is not necessarily Gaussian. Conditional asymptotics on the event that a certain limiting random variable is non‐zero is also discussed.