Characterization of Chemical Densified Coating as Tritium Permeation Barrier

In a fusion blanket design, ceramic coating on structural materials has been considered to be used as a tritium permeation barrier. The Chemical Densified Coating (CDC) method has some advantage compared with another coating method. This method is capable to form densified coating on either the outer or the inner surface of a tube or a container. This process temperature is low (450°C). The fabrication technique of Cr₂O₃-SiO₂ coating had been developed using CDC method. However, Cr₂O₃-SiO₂ coating had open pores in the coating. For filling open pores, the densification treatment by CrPO₄ was examined. In this study, the verification of open pores, the thermal shock resistivity, the adhesion strength and the deuterium permeability were evaluated and compared with Cr₂O₃-SiO₂ (Type 1) coating and Cr₂O₃-SiO₂ including CrPO₄ (Type 2) coating. From these results, it was confirmed that Type 2 coating had a good adhesion property, and permeation reduction factor of SS316 with Cr₂O₃-SiO₂ including CrPO₄ coating reached about 1,000 at 600°C.     

Approximative model reconstruction of cascade systems

This letter considers how to approximately reconstruct a cascade system from a given unstructured system estimate. Many system identification methods, including subspace methods, provide reliable but generally unstructured black-box models. The problem we consider is how to find cascade systems that are close to such black-box models. For this, we use model matching techniques and optimal weighted Hankel-norm approximation to obtain accurate low-order cascade systems. We show that it is possible to bound the reconstruction error in terms of an error tolerance parameter and weighted Hankel singular values. The suggested methods are illustrated on both a numerical example and a real double tank system with experimental data.     

Ultrasonic spray pyrolysis synthesis of Ag/TiO2 nanocomposite photocatalysts for simultaneous H2 production and CO2 reduction

Simultaneous photocatalytic hydrogen production and CO₂ reduction (to form CO and CH₄) from water using methanol as a hole scavenger were investigated using silver-modified TiO₂ (Ag/TiO₂) nanocomposite catalysts. A simple ultrasonic spray pyrolysis (SP) method was used to prepare mesoporous Ag/TiO₂ composite particles using TiO₂ (P25) and AgNO₃ as the precursors. The material properties and photocatalytic activities were compared with those prepared by a conventional wet-impregnation (WI) method. It was found that the samples prepared by the SP method had a larger specific surface area and a better dispersion of Ag nanoparticles on TiO₂ than those prepared by the WI method, and as a result, the SP samples showed much higher photocatalytic activities toward H₂ production and CO₂ reduction. The optimal Ag concentration on TiO₂ was found to be 2 wt%. The H₂ production rate of the 2% Ag/TiO₂–SP sample exhibited a six-fold enhancement compared with the 2% Ag/TiO₂–WI sample and a sixty-fold enhancement compared with bare TiO₂. The molar ratio of H₂ and CO in the final products can be tuned in the range from 2 to 10 by varying the reaction gas composition, suggesting a viable way of producing syngas (a mixture of H₂ and CO) from CO₂ and water using the prepared Ag/TiO₂ catalysts with energy input from the sun.     

北方地区绿色建筑行动纲要

我国北方地区城市建筑约占全国建筑总量的26%,但建筑能耗却占到全国的40%~50%,因此,北方地区推行绿色建筑对节能减排意义重大。本文从选址与节地、供热计量、绿色建筑激励政策等十个方面阐述北方地区绿色建筑行动纲要。     

Effects of embedding direct reduction followed by magnetic separation on recovering titanium and iron of beach titanomagnetite concentrate

Embedding direct reduction followed by magnetic separation was conducted to fully recover iron and titanium separately from beach titanomagnetite(TTM).The influences of reduction conditions,such as molar ratio of C to Fe,reduction time,and reduction temperature,were studied.The results showed that the TTM concentrate was reduced to iron and iron-titanium oxides,depending on the reduction time,and the reduction sequence at 1 200°C was suggested as follows:Fe_(2.75)Ti_(0.25)O_4→Fe_2TiO_4→FeTiO_3→FeTi_2O_5.The reduction temperature played a considerable role in the reduction of TTM concentrates.Increasing temperature from 1 100 to 1 200°C was beneficial to recovering titanium and iron,whereas the results deteriorated as temperature increased further.The results of X-ray diffraction and scanning electron microscopy analyses showed that low temperature(≤1 100°C)was unfavorable for the gasification of reductant,resulting in insufficient reducing atmosphere in the reduction process.The molten phase was formed at high temperatures of 1 250-1 300°C,which accelerated the migration rate of metallic particles and suppressed the diffusion of reduction gas,resulting in poor reduction.The optimum conditions for reducing TTM concentrate are as follows:molar ratio of C to Fe of 1.68,reduction time of 150 min,and reduction temperature of 1 200°C.Under these conditions,direct reduction iron powder,assaying 90.28 mass%TFe and 1.73 mass% TiO_2 with iron recovery of 90.85%,and titanium concentrate,assaying 46.24mass% TiO_2 with TiO_2 recovery of 91.15%,were obtained.     

Effects of Al contents on microstructure and properties of hot-dip Zn-Al alloy coatings on hydrogen reduced hot-rolled steel without acid pickling

A new hot-dip galvanizing method was employed on hot-rolled low carbon steel. The effects of Al contents on microstructure, micro-hardness and corrosion resistance of Zn-Al alloy coatings were systematically investigated. Phase composition, microstructure and element distribution in Zn-Al alloy coatings were analyzed using X-ray diffraction (XRD) and electron probe micro analysis (EPMA), respectively. It is found that Al content (0. 6–6. 0 wt. %) in galvanizing zinc affects surface quality and adhesion between coatings and matrix in the newly developed method. In addition, with increasing Al content, micro-hardness significantly increased due to the increase in Zn-Al eutectoid phases. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) also revealed that increase in Al plays a noticeable role in improving the corrosion resistance of Zn-Al alloy coatings.     

Key factors affecting nickel recovery during the segregation of laterite ores

The segregation process as applied to nickel laterite ores involves the formation of gaseous nickel and iron chlorides which are subsequently reduced to form ferronickel on the surface of a solid carbon reductant. A fundamental study of the process has been carried out using limonite, nontronite and garnierite ores. The study highlighted the significant impacts that ore mineralogy and carbon addition have on the amount of nickel which is segregated rather than retained within the ore due to in situ reduction. These important aspects affecting nickel recovery and the success of the process are discussed in this paper.     

Low-order dynamic equivalent estimation of power systems using data of phasor measurement units

This paper utilizes data measured by phasor measurement units (PMUs) to extract a low-order dynamic equivalent model for power system stability studies. The estimated model is a 2-order model for synchronous machines. This model has the advantage of simplicity of classical model and considerably reduces the oversimplifying error of classical model. This method offers an alternative approach to analytical model reduction techniques based on the detailed system models. The proposed method uses the synchronized bus voltage and current phasors measured by PMUs. Using post disturbance data, electrical and mechanical parameters of the equivalent generator are estimated sequentially. Furthermore, a new approach for estimation of two-machine and single machine infinite bus (SMIB) equivalent systems are presented for analysis of electromechanical oscillations. To evaluate the performance of the proposed approach, simulations are performed on a two area 13-bus test system and real measured PMU data. Simulation results show that the estimated model can represent the dynamic behavior of the studied system with good approximation.